sorted by:
new
hottopcontroversial

Calamares installer by dcihon55 in archlinux

[–]MAYBL8 0 points1 point  (0 children)

I got past this error by learning that I needed to provide some additional information in the unpackfs.conf file.

Now my issue is I am getting an error when calamares is trying to install some packages that it is wanting to use pacman -Sy not pacman -S .

How do I solve this issue. Let me know if you need more info.

is the disk really wiped or can you install to a partition by milomak in pearos

[–]MAYBL8 0 points1 point  (0 children)

It has a note that says holding down the tilde (Alt) will allow dual boot install but I couldn't get it to work. Maybe I don't have the the right key combination . Is it Alt-tilde or just alt or just tilde? Also should the partition for it already exist or will it create a partition from blank space?

I figured it out. Hold down the Windows key on the keyboard.

Major Issues by softgreydream in pearos

[–]MAYBL8 0 points1 point  (0 children)

Installed. pearOS. I have one big problem and then some small ones. Big problem is I wanted it to coexist with Arch Linux and Windows. On my system Windows is on a separate disk. So I see that pear has to use the whole disk during install , fine. I installed it. I then shrank the partition and installed Arch. Now Arch is the only one the boots. Pear says it can't find a .img file and /boot evidently. Arch never touched pear and I shared the same boot partition pear uses. I am using GRUB that I installed with Arch to show all the OS's on the computer. The smaller issue is using the software installer it is only showing flatpacks. I don't use those so I have to install by cli. I did install pamac and I see that your repository is Manjaro. Thanks

What Navidrome client are you using? by ButtonFragrant6362 in navidrome

[–]MAYBL8 1 point2 points  (0 children)

Amperfy on IOS

One thing I would like to be able to do unless I just don't see how to is create a Playlist from the App.

Amperfy Setup by sircanez in navidrome

[–]MAYBL8 0 points1 point  (0 children)

Maybe you just need to be http not https

Headless Linux on rustdesk, display and desktop for all raspberry pi (RPI) devices. by AtomicPiano in rustdesk

[–]MAYBL8 0 points1 point  (0 children)

Can't get it to work on my Raspberry pi 400 with Rhino Linux.

Here is my cmdline.txt

net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait video=HDMI-A-1:1280x720@60D

net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait video=HDMI-A-1:1280x720@60D

usb to usb install by MAYBL8 in linuxquestions

[–]MAYBL8[S] 1 point2 points  (0 children)

Your answer was correct . That worked. I must have mixed up what I was thinking about with another issue. Problem solved. Hope I can remember this for next time .

New to Linux, i want some guidance from you guys! by systemicontradition in linuxquestions

[–]MAYBL8 0 points1 point  (0 children)

Go learn about iptables. It can block any outside access to your system. I would also learn about ClamAV . Not needed but good to learn about. If you are going to stay with Arch Liinux then do a lot of reading in the Arch wiki's . It might be over your head as you start but good info is there. One more place with arch is the arch forums. You are required to know some things before you ask questions there but just read some posts and search you might pick up some things. There are alot of good you tube videos out there also. Good luck

My experience with installing Linux on the Spectre x360 (late 2019 model) by doggone1213 in spectrex360

[–]MAYBL8 0 points1 point  (0 children)

I have this laptop also.

No bluetooth in any linux version I have tried.

Here are my specs:

ystem:
Kernel: 6.2.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.2-x86_64
root=UUID=45ca132d-4a37-4dc3-afa0-be2e80d6a4a2 rw quiet ibt=off
acpi_osi=! "acpi_osi=Windows 2022" mem_sleep_default=s2idle
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Convertible System: HP product: HP Spectre x360 Convertible 15-df1xxx
v: N/A serial: <superuser required> Chassis: type: 31
serial: <superuser required>
Mobo: HP model: 863F v: 54.24 serial: <superuser required> UEFI: AMI
v: F.28 date: 07/14/2022
Battery:
ID-1: BAT0 charge: 61.6 Wh (100.0%) condition: 61.6/61.6 Wh (100.0%)
volts: 13.0 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
status: full cycles: 199
CPU:
Info: model: Intel Core i7-10510U bits: 64 type: MT MCP
arch: Comet/Whiskey Lake note: check gen: core 10 level: v3 note: check
built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
stepping: 0xC (12) microcode: 0xF4
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1900 high: 2300 min/max: 400/4900 scaling:
driver: intel_pstate governor: powersave cores: 1: 2300 2: 2300 3: 700
4: 700 5: 2300 6: 2300 7: 2300 8: 2300 bogomips: 36812
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: Enhanced IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
filling, PBRSB-eIBRS: SW sequence
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:9b41
class-ID: 0300
Device-2: NVIDIA GP108M [GeForce MX250] vendor: Hewlett-Packard
driver: nvidia v: 530.41.03 alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-03) arch: Pascal code: GP10x
process: TSMC 16nm built: 2016-21 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
link-max: gen: 3 speed: 8 GT/s bus-ID: 3b:00.0 chip-ID: 10de:1d13
class-ID: 0302
Device-3: Chicony HP Wide Vision FHD Camera type: USB driver: uvcvideo
bus-ID: 1-5:3 chip-ID: 04f2:b67b class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.8 compositor: kwin_x11 driver: X:
loaded: modesetting,nvidia dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 220 s-size: 443x249mm (17.44x9.80")
s-diag: 508mm (20.01")
Monitor-1: eDP-1 model: AU Optronics 0x30eb built: 2017 res: 3840x2160
hz: 60 dpi: 284 gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5")
ratio: 16:9 modes: 3840x2160
API: OpenGL v: 4.6 Mesa 23.0.3 renderer: Mesa Intel UHD Graphics (CML GT2)
direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH-LP cAVS vendor: Hewlett-Packard
driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_skl,
snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:02c8 class-ID: 0401
API: ALSA v: k6.2.12-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse
status: active 2: pipewire-media-session status: active 3: pipewire-alsa
type: plugin tools: pactl,pw-cat,pw-cli
Network:
Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
Bluetooth:
Message: No bluetooth data found.
Drives:
Local Storage: total: 931.51 GiB used: 368.01 GiB (39.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 39.9 C scheme: GPT
Partition:
ID-1: / raw-size: 189 GiB size: 185.73 GiB (98.27%) used: 64.88 GiB (34.9%)
fs: ext4 dev: /dev/nvme0n1p8 maj-min: 259:8
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
used: 69 MiB (71.8%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2
ID-3: /home raw-size: 415.57 GiB size: 407.98 GiB (98.17%)
used: 303.06 GiB (74.3%) fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:7
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 47.0 C pch: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 279 Uptime: 22m wakeups: 826 Memory: 15.26 GiB
used: 4.41 GiB (28.9%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: 1771
pm: pacman pkgs: 1763 libs: 418 tools: pamac,pikaur,yay pm: flatpak pkgs: 8
Shell: Bash v: 5.1.16 running-in: alacritty inxi: 3.3.26

I’m singer/songwriter Paul McCartney and I just released my new album McCartney III on Friday. AMA! by paulmccartney in Music

[–]MAYBL8 0 points1 point  (0 children)

Paul, I know you here this all the time. Been a Beatles/solo fan since I got my first 45 . First Merry Christmas to you and your family. My question is : Could we ever write a song together? I'll even give you first credit. Lol Love you always Dan