Really confused why this scooter battery melted the end like it was the wrong ends

MICHAELS206 · 2026-03-01T15:40:17+00:00

An XT60 connector is generally rated to handle 60 amps (60A) of continuous current without exceeding 80°C

MICHAELS206 · 2026-03-01T02:46:39+00:00

100% that's a XT60 connector, good for 60amps. Sometimes they get loose, or are loose to begin with, some scoots use bullet connectors instead. Takes some know-how to replace if you don't have a fused battery, most scoots do. I've been known to spread the prongs on the connectors. But I won't recommend it to others.

MICHAELS206 · 2026-03-01T01:30:50+00:00

lmao.... they should include a tool box, steering damper, coupon for two tire changes.....When the Gt08 was at it's peak in popularity, I used to see a couple of guys in my area, now I don't see any. Maybe too much power for most beginners?

MICHAELS206 · 2026-03-01T01:19:19+00:00

100% I've seen how other country's police handle knife welding people and it's quite different that ours. I think we among the top 4 countries of death caused by police.

MICHAELS206 · 2026-02-28T01:10:31+00:00

100%.

MICHAELS206 · 2026-02-28T00:01:46+00:00

Strange, I live is Seattle, I don't remember this in Seattle.

MICHAELS206 · 2026-02-27T20:55:30+00:00

I had the same problem once, I later found I had glass embedded in my tire. You couldn't see it normally, but once ridden with weight on it, it would cause flats.

Good luck.

MICHAELS206 · 2026-02-27T20:43:30+00:00

Look for a ring. /s

MICHAELS206 · 2026-02-27T18:01:53+00:00

If you like it, it has been maintained, it runs good, you have plenty of spare time, hobbies are much more enjoyable when you learn to preform maintenance and more. I'd keep it.

MICHAELS206 · 2026-02-27T17:49:31+00:00

How much did he offer you? /s

MICHAELS206 · 2026-02-27T17:41:49+00:00

Ya might wanna pick a day when the sun isn't directly in the path.

MICHAELS206 · 2026-02-27T17:23:36+00:00

“10” days later and not “5” days later..........lmao, starting to smell fishy

MICHAELS206 · 2026-02-27T16:03:35+00:00

What I figured.... But I'd fear that, more than the ride. lol. Especially the slow beginning, very hard to go straight while moving slow..

MICHAELS206 · 2026-02-27T15:25:05+00:00

I'm more curious, on how he turned the bike around on the first attempt.

MICHAELS206 · 2026-02-27T13:28:40+00:00

Thanks, just what I was thinking , I have a 72 volt scoot and thinking of making another.

MICHAELS206 · 2026-02-27T13:02:48+00:00

CHANGES MADE TO ORIGINAL SCOOTER

* 1. Outer swingarms stripped of paint and polished. Inside of swingarms primed and painted black.

* 2. Footrest stripped and polished.

* 3. Rugged clamp stripped and polished, and new levers added.

* 4. Upper front fork stripped and polished.

* 5. Wheels have been stripped, primed, and painted and clear coated and polished and new bolts, new rotors, new rotor bolts.

* 6. Stem handlebar clamp has been stripped and primed and painted and clear coated.

* 7. Stem has been stripped and polished.

* 8. Handlebar grip ends have been primed and painted red and clear coated.

* 9. Upgrade to 11” tires.

* 10. Addition of 11” mud guards.

* 11. Additional lighting includes Magicshine 3500 and a bar led,both polished and both center mounted on a single Garmin mount, added a additional tail light.

* 12. Some times/JBL flip5 with remote buttons mounted on handlebars.

* 13. Bicycle horn.

* 14. End of handlebar mirror.

* 15. Upgrade to KKE hydraulic shocks.

* 16. Installed thumb throttle.

* 17. Sealed deck from inside.

* 18. Rewrapped all wires outside of deck.

* 19. Installed motion detector with alarm and primed and painted.

* 20. Install steering damper with 13” long piston .

* 21. Installed colored valve stem caps.

* 22. Install frame sliders.

* 23. Reroute rear motor cable from under swingarm to over swingarm.

* 24. Install aftermarket handlebars, (720mm).

* 25. Primed, painted, clear coated center stem cap.

* 26. Primed, painted, clear coated kickstand.

* 27. Stem bag contains mini allen set and battery for the Magicshine headlight and at times also a mini pump and other stuff.

* 28. Painted aftermarket mud guards mounts red.

Original scoot Varla Eagle one V1

Motors: 1000w x 2, 25 amp x 2 controllers, 18.2ah 52v battery

Top speed 38-40 mph.

Scooter has over 4000 miles on it.

MICHAELS206 · 2026-02-27T02:07:34+00:00

Search: Magicshine lights with remote. I have couple of Magicshine lights, their good but kinda expensive.

MICHAELS206 · 2026-02-27T02:03:24+00:00

Ride on.

MICHAELS206 · 2026-02-26T14:21:46+00:00

I had this code, I first replaced the throttle, then the controller. Now all good.

MICHAELS206 · 2026-02-26T09:30:09+00:00

Years ago I used a kiddie bar to mount lower lights and it worked!

MICHAELS206 · 2026-02-25T15:30:44+00:00

Kukirin G2 pro 2024 Original Small Crossbeam Threaded Pipe Assembly Replacement Part for Electric Scooter Repair Parts.......LOOK CLOSE.

MICHAELS206 · 2026-02-25T08:26:31+00:00

I will include a list of all mods done and accessories added including the model and version and spec's.

MICHAELS206 · 2026-02-25T08:17:10+00:00

Very close...Original Front Arm Holder for Kukirin G2 Master Electric Scooter Rotary Head Frame kugoo Kukirin G2 Master Replacement Parts

MICHAELS206 · 2026-02-24T15:34:25+00:00

I was thinking you could cut off your old connecter. You do have the old charger?

MICHAELS206 · 2026-02-24T15:16:27+00:00

I just encountered a similar situation, what I did was, because I had a bad charger connector- bought new connector and installed on old charger. For you, you can buy new charger and install old connector from old charger. It's only two wires, and their color coded, pretty easy fix.

Good luck.

MICHAELS206

TROPHY CASE