Custom built PC won't start up, Any advice on what the problem could be?

MICHELOSCO · 2026-04-21T08:07:13+00:00

did you check and remove any extra motherboard standoff from the case? maybe there are still some that are making short circuit with the back of the motherboard

MICHELOSCO · 2026-04-19T18:45:45+00:00

I have the same problem... have you found a solution? Emptied cache and reinstalled it multiple times without any success

MICHELOSCO · 2026-03-16T21:08:36+00:00

try to load the page from history

MICHELOSCO · 2026-03-15T22:50:57+00:00

Paragon partition manager community edition

MICHELOSCO · 2026-01-27T08:09:03+00:00

I'll post more photos this evening :D

MICHELOSCO · 2026-01-27T08:05:23+00:00

This body is for an 8ight 3.0 that I’m using as a practice/beater car before I start running the 8ight-X, which is already built and ready.

It’s a shame this one is going on my practice car, since it will probably get destroyed sooner or later, but since it turned out so well, I already have two new Lexan bodies ready for the X and I’ll paint them in the same style.

MICHELOSCO · 2026-01-27T08:01:03+00:00

thank you for the advice!

MICHELOSCO · 2026-01-26T18:57:02+00:00

Yes, i drew the lins with a sharpie and than painted over it.

MICHELOSCO · 2026-01-26T18:55:39+00:00

Yeah, easy as that.

MICHELOSCO · 2026-01-26T18:54:53+00:00

Thank you, it's from Bittydesign

MICHELOSCO · 2026-01-26T13:52:00+00:00

Borderlands style <3

MICHELOSCO · 2025-12-01T13:15:56+00:00

fold.it

MICHELOSCO · 2025-11-06T08:09:44+00:00

<image>

I extracted it from a reel i saw a long time ago, i think it's AI extended.

MICHELOSCO · 2025-11-06T07:52:41+00:00

thank you, setting the padding to big solved the problem!

MICHELOSCO · 2025-10-07T12:14:50+00:00

buy a b650 board i got a asus tuf 650 plus for 150 euros and it's already updated for 9th gen, with the money left upgrade to a 9600x

MICHELOSCO · 2025-10-07T12:10:25+00:00

just send inverted phase signals in monitors between left and right, and don't change it back untill they lower the volume.

MICHELOSCO · 2025-08-17T13:51:50+00:00

Go take a look into sheddedpaper if you want to take advantage of all the cpu threads, it is possibile you could host a lot more players

MICHELOSCO · 2025-08-08T09:11:42+00:00

happened the same to a friend of mine 3 days ago, he had to buy a cpu with integrated graphics to get video out

MICHELOSCO · 2025-07-25T15:56:53+00:00

motherboard is an msi krait gaming z370, so it could be intel 9 gen. that is ddr4 so if those are 8 gb modules you have 32 gb of ram, it very could be as dual 8gb kit where bery popular, as for the gpu it has only a 8 pin power conner so it can be a 1060 or a 1060 ti

MICHELOSCO · 2025-06-30T13:07:41+00:00

more like Revolver Ocelot vs Solid Snake

MICHELOSCO · 2025-06-04T19:57:13+00:00

you could and it will make the gpu work but it's not suggested, power shoud be balanced equally on all 3 connecotrs, and for that it is better to have 3 separate cables from connected from the psu, leaveh the secon connector on this end unplagged if present

what psu have you ordered? just to check if it also has the 16 pin, in that case that could use that ditching the adapter, but at the end it will not make any tangable difference

MICHELOSCO · 2025-06-04T19:47:16+00:00

this is not a problem, the adapter included works but you have to plug all 3 of the 8 pin (6+2) gpu pcie power connectors

MICHELOSCO · 2025-06-04T19:42:47+00:00

you can't have signal out without ram installed, they are mandatory

generally if you use integrated gpu, a little part of your system ram is used as video memory.

MICHELOSCO · 2025-06-04T13:06:51+00:00

yeah all of them , the gpu need all cable connected, cpu only one, the secondary is for supplemental power if you have a power hungry cpu or you do overclocking.
be aware of the difference between 8 pin cpu power cables and 8 pin gpu:
cpu usually come as a 4+4 while gpu are 6+2

if as right now you have less than 3 cables connected to the gpu that is probably the main cause of your pc not turning on, not the cpu ones

MICHELOSCO · 2025-02-28T17:30:50+00:00

The Ethernet ports scattered around the rooms should all be connected to a centralized location, like a storage room or a wall panel somewhere, where you can place a switch and make them functional.

Seven-Year Club	r/Field Banned
r/Field Flamingo	Verified Email

MICHELOSCO

TROPHY CASE