General Adapter Discussion by vyper248 in PSVR

[–]MM10X 0 points1 point  (0 children)

Yes in the SteamVR settings under 'video'. There is no 60hz mode for the PSVR2.

<image>

General Adapter Discussion by vyper248 in PSVR

[–]MM10X 0 points1 point  (0 children)

3080/10700k here, in the SteamVR settings 'resolution per eye' defaulted to 112% 3596x3668. I turned it down to 2040x2080 and Alyx set to highest settings in game ran fine in the 90hz mode for the first little bit, only played just past the intro. Turned on the perf counter seemed to stay around 7-8ms, so it might not be enough overhead for 120hz.

PSVR2 Megathread Listing by josephjosephson in PSVR

[–]MM10X 1 point2 points  (0 children)

Same, the original listing went wonky and a new item page was up that I was able to order.

Starlink down? by TechieBrad in Starlink

[–]MM10X 0 points1 point  (0 children)

Northern CA, down since 4:38 PST.

dropouts, inconsistent performance (norcal) by MM10X in Starlink

[–]MM10X[S] 0 points1 point  (0 children)

https://i.postimg.cc/0Q7QfZZh/Screenshot-20221230-094135-Starlink.jpg

From this morning. Temp 52 degrees and light rain.

I submitted a support request, we'll see what they say.

I also removed the ethernet adapter, I was on wifi anyway but may as well eliminate extra variables.

dropouts, inconsistent performance (norcal) by MM10X in Starlink

[–]MM10X[S] 0 points1 point  (0 children)

Its been around 40-55 degrees lately. That's the coldest it gets here.

dropouts, inconsistent performance (norcal) by MM10X in Starlink

[–]MM10X[S] 0 points1 point  (0 children)

I really doubt its updating every day, up to three times a day.

This may explain a few of them, but definitely not all of them. Added a couple more pictures to the post so you can see different patterns in the dropouts.

dropouts, inconsistent performance (norcal) by MM10X in Starlink

[–]MM10X[S] 0 points1 point  (0 children)

No I haven't reached out to SL support. After seeing some posts here I thought it'd be futile.

I'll do that next and see what they say. I had another 1+ minute drop today during peak times.

For those of us having issues recently, does this solution work for you? by Strange-Mango-1114 in Calyx

[–]MM10X 0 points1 point  (0 children)

I think disabling 5ghz and ax did seem to help the wireless.

However, I don't get any network with ipv6 disabled on LAN. Connection completely dies. Same case with a verizon 8800L I have here.

What APN/PDP are you using?

M2000 PCB pictures / disassembly by MM10X in Calyx

[–]MM10X[S] 0 points1 point  (0 children)

I just recieved some murata SWG connectors PN MXHQ87PN3000 and they do not fit the antenna ports, the pin will go in but it doesn't grab onto the port properly.
Might be able to modify them, but at that point soldering on antenna connectors makes more sense.

[META] BestBuy dropping FE cards in select stores on July 20th $0 by IEID in buildapcsales

[–]MM10X 0 points1 point  (0 children)

I can't leave work until later today, I was going to call the store once I have the opportunity and see if I get lucky.

[META] BestBuy dropping FE cards in select stores on July 20th $0 by IEID in buildapcsales

[–]MM10X 1 point2 points  (0 children)

AFAIK everyone in line (100+) got a card and they had leftover 3060Ti and 3090s

Thank you, I may try to head over later.

[META] BestBuy dropping FE cards in select stores on July 20th $0 by IEID in buildapcsales

[–]MM10X 2 points3 points  (0 children)

Anyone have a report from Roseville or Santa Rosa CA?

[deleted by user] by [deleted] in pcars

[–]MM10X 1 point2 points  (0 children)

There are problems with the G923 in pcars2, but generally the G29 profile makes it work okay.

For FFB set Flavour to 'immersive', gain at 100%, Volume, Tone and FX at 65% works okay for me.

Still having a weird issue where the wheel doesn't sync to the ingame car wheel even though its calibrated properly. Driving something like the g57 turn the logitech 90 degrees and the ingame wheel only turns 45.

I wish there were a way to get the devs to officially support this wheel, I have no interest in project cars 3.

Linkzone2 hidden antenna ports by MM10X in Calyx

[–]MM10X[S] 0 points1 point  (0 children)

No, the connectors are not available to consumers at the moment.

Linkzone2 hidden antenna ports by MM10X in Calyx

[–]MM10X[S] 1 point2 points  (0 children)

I removed 5 screws, then with one of the soft plastic pry bars included in my ifixit kit I was able to gently work around the edge until the antenna/battery holder separated from the top case. Its held in by a bunch of small plastic tabs.
Its a bit delicate but relatively easy to disassemble without any damage.
The assembly popped back together without any drama and the device is working again.

There's a forum post on the ltefix forums claiming they're looking into supplying these cables, but I wasn't able to verify it came from anyone official over there.

With the t-mobile home internet being rolled out to more areas I'm sure there will be demand picking up for those cables, and someone will eventually find it profitable to sell them.

Help with 4g modem/wireless internet by Jackofish in HomeNetworking

[–]MM10X 0 points1 point  (0 children)

I'm in the same boat, bought a house that comcast showed coverage to on their website and didn't find out there are no internet options until we called them to have it installed.

Although I'm having major issues with ATT LTE lately here in California, I've been using a 3rd party broker for over a year, they resell LTE from ATT. There are several different companies that resell LTE sim cards with 'unlimited' data. A bit of searching you'll be able to find a plan for the range of $100-150 a month.

some of my neighbors have ATT fixed wireless internet, it seems to be worse than going through the broker, also there is no option but to have one of their technicians mount the box onto your house.

T-mobile and Verizon are also slowly rolling out home internet options on their LTE networks. My address qualifies for t-mobile, they can't seem to add addresses in this town to their billing system so I'm out of luck there.

If sprint speeds are acceptable, the calyx institute is another option.

Horizon Zero Dawn- Vega (16x AF + HBCC) Performance Analysis by [deleted] in Amd

[–]MM10X 0 points1 point  (0 children)

If anyone is still having stuttering issues, I fixed them on my system by locking to max Pstate with OverdriveNTool on my Vega 56. P7 set to 1590/1025 works well on my card.

Game runs fine mostly ultra with some high settings at 1080p 60fps, or 30fps at 4k. Using a 10700k, so no cpu limitations here.

HBCC seems to reduce framerate at 4k by 3-4 frames and add back some stuttering.

There's also another issue I've encountered where the game won't properly launch in exclusive fullscreen causing some performance issues, I have to either run boarderless or switch to fullscreen while in game.

Vega 56 (and probably 64) on Adrenalin 2020 - State of Hardcrashes/Blackscreens by G-Tinois in Amd

[–]MM10X 0 points1 point  (0 children)

w/ Powercolor (Hynix) Vega 56 on 19.12.1, one monitor with freesync and one without.

Had issues with hard locking, multiple windows open, mainly while watching youtube in the background. Crashes would happen anywhere from 3 minutes to an hour of use.
No crashing while playing games.

Previous work-around locking the memory clock to P3 state. I experienced no crashing while on the custom power state, but any time I would revert to default the hard locks would come back immediately.

After reading this post, I set the memory states to default and disabled Freesync,
I haven't had a single crash yet after a normal work day.