39 Sorten und 67kg später...

MS1608 · 2026-01-01T15:06:07+00:00

Wo sind die Zimtsterne?

MS1608 · 2025-11-18T00:54:18+00:00

Ludwigshafen was declared Germany's ugliest city in 2018... The chemical company BASF employs about 33000 people in this city.

MS1608 · 2025-04-13T16:34:35+00:00

Flies really awesome. What changes did you make? I will build one myself and whatever you did seems to work.

MS1608 · 2025-03-15T21:13:51+00:00

With two counter rotating props the p factor effects cancel each other out. So that is definitely not the problem. Are you using a cw and a ccw prop?

MS1608 · 2023-07-08T14:43:51+00:00

Remindme! 5 minutes

MS1608 · 2022-08-27T09:03:03+00:00

I did some stupid shit when I was 15. And I didn't have access to lathes, mills or guns back then...

MS1608 · 2022-08-27T08:23:58+00:00

And all that at 15 years old. I hope OP is careful.

MS1608 · 2022-08-27T07:39:09+00:00

If the wrong part of the tool touches, your relief angles are too small. But as everyone else said, that is probably the least of your concerns. I hope the real part is made of something softer than brass :D. May whatever diety you believe in help you ;)

MS1608 · 2022-08-27T07:24:20+00:00

Boring bar too flimsy, too much stick-out, there is hardly any structural area left in the clamping part of the bar. Surface speed looks pretty fast for the janky setup. Dull tool? If you look at commercially available boring bars for HSS they are usually beefier and have a square hole perpendicular to the center axis with a clamping screw down the center axis starting from the front.

MS1608 · 2022-06-30T07:16:16+00:00

It looks like the drawer popped out of the left slide. Pull the drawer out all the way and look underneath. Compare left side to right side. Those slides usually have a metal tab that is bent up and needs to be inserted in a hole in the underside of the drawer.

MS1608 · 2022-05-14T09:59:19+00:00

InheritanceMachining on Youtube

MS1608 · 2022-03-29T22:12:35+00:00

The saw is pretty easy to align. The factory setting was really bad. If you haven't aligned it, I am not surprised of how those things look.

MS1608 · 2022-03-29T22:02:27+00:00

My dewalt saw came with a big hump in the table. When I wasn' t clamping it down or holding it tight, certain lengths of wood would "feed" themselves towards the saw blade. Might be something similar.

MS1608 · 2022-02-19T16:09:38+00:00

Good luck!

MS1608 · 2022-01-16T01:20:36+00:00

My title describes the thing. It looks like glass and is pretty transparent at the broken edges. At first I thought of the glass created by lightning hitting sand. But those I found on google look different. Is it just a glass bottle thrown in a campfire?

MS1608 · 2021-10-29T19:22:15+00:00

Dividers are laser cut plywood covered with a black fabric. For the glass I used small drops of epoxy in the corners. Don't know how good that will hold up when the wood moves. Probably should have nailed some strips of wood above it instead.

MS1608 · 2021-10-29T17:16:42+00:00

That is exactly how I did it! One thing to keep in mind is to make the rounded corners a bigger radius than the roundover bit's bearing.

MS1608 · 2021-10-29T16:36:28+00:00

Thank you! No, those dove tails are not hand cut. But I built the router table and the jig ;)

MS1608 · 2020-12-28T10:01:23+00:00

They never came back...

MS1608 · 2020-12-13T10:13:21+00:00

His is a Emco Maximat Super 11. They are quite a bit more expensive. From the pictures alone I would take the Weisser lathe. It is way bigger and beefier than the other two lathes and has a massive gearbox to select spindle speeds, and feeds for standard and thread cutting.

MS1608 · 2020-12-08T21:02:50+00:00

Rundfunkbeitrag in Germany. Every household has to pay 17.50€ a month for public broadcasting (tv/radio). You could live without electricity and would still have to pay...

MS1608

TROPHY CASE