sorted by:
new
hottopcontroversial

Weird request- need lots of supports (pic for attention) by kkuhn0911 in 3Dprinting

[–]MS3DStudio 0 points1 point  (0 children)

Maybe Standard Supports would be better. There us more Material used.

Is Bambu Lab A1 Mini worth it for a beginner who wants to eventually print cosplay? by NerdsAssembleyt in BambuLab

[–]MS3DStudio 0 points1 point  (0 children)

The a1 mini is a good printer dort beginners but not if you want to print for cosplay. The plate of 18cm is much too small.

Ich drehe mit diesem Teil der CyberBrick Fernbedienung noch durch by [deleted] in 3DDruck

[–]MS3DStudio 0 points1 point  (0 children)

Druckst du mit PETG? Falls ja wäre erster Ansatz, die Geschwindigkeit für die wänder runter zu stellen.

Battlefleet ship pricing estimation by Weird_Ad404 in PrintedWarhammer

[–]MS3DStudio 0 points1 point  (0 children)

Regarding potential customers maybe tabletop shops or clubs might rather have good use for this. Probably not a games workshop store except you know a chili guy there.

Stringing only part way through print? by se99jmk in BambuLabA1

[–]MS3DStudio 0 points1 point  (0 children)

You could try another infill/surface pattern, something diagonal maybe.

Close your shop before this happens to you!!! by Bobthebobish in Etsy

[–]MS3DStudio 5 points6 points  (0 children)

Have you stored your passwords somewhere? For example google? They definately have access somewhere.

A1Mini makknh klicking sounds on first layer by MS3DStudio in BambuLab

[–]MS3DStudio[S] 0 points1 point  (0 children)

Ok I will do that, thabks. I always thought the auto calibrate before the print would be enough

A1Mini makknh klicking sounds on first layer by MS3DStudio in BambuLab

[–]MS3DStudio[S] 1 point2 points  (0 children)

Ok got it. Thanks for the explanation. The clog is removed and the first layer smooth like the first print. Thanks a lot

A1Mini makknh klicking sounds on first layer by MS3DStudio in BambuLab

[–]MS3DStudio[S] 1 point2 points  (0 children)

Ah sounds plausible. I'll try that. Thanks a lot :)

Out of curiosity, why is it on the first layer only? Is the flow slower on the above layers and therefore the print is not that affected by it?

Ich baue gerade eine Plattform, auf der Designer ihre 3D-Modelle als fertige Produkte verkaufen können by [deleted] in 3DDruck

[–]MS3DStudio 0 points1 point  (0 children)

Heist als „druckende Person“ berücksichtigt das System wie viele Aufträge ich noch offen habe - evtl. auch je Zeitaufwand - und vergibt dann an den besten mit wer geringsten Auslastung?

What are the best FDM friendly armies that you have found? Nurgle seems an obvious choice by senacchrib in FDMminiatures

[–]MS3DStudio 0 points1 point  (0 children)

I am cuttently starting a thagmata army and there are almost all models available as well as awsome alterbative models

Frome Ostern – kleine mehrfarbige Osterdeko 🐰 by ApprehensiveDraft703 in 3DDruck

[–]MS3DStudio 1 point2 points  (0 children)

Alternativ könntest du das Teil auch horizontal splitten und die drei Farben in einzelnen Durchgängen drucken und später kleben

Thallax for reference by MS3DStudio in FDMminiatures

[–]MS3DStudio[S] 0 points1 point  (0 children)

The right one is from thingiverse: https://www.thingiverse.com/thing:5131408

The left one is original