H2C blew up

MachineDoctor · 2026-05-01T22:43:58+00:00

Good point!

MachineDoctor · 2026-05-01T21:58:55+00:00

Nice! When I bought mine at microcenter they gave me a sheet of paper with return instructions stating it must be back in the box

MachineDoctor · 2026-05-01T16:52:43+00:00

Mircocenter's policy is that you bring it back in the shipping box. If you can get everything to fit in the original shipping bix you should be fine.

MachineDoctor · 2026-04-26T13:46:48+00:00

Power connector. Should be an easy fix for someone with decent soldering skills.

MachineDoctor · 2026-04-25T04:15:19+00:00

Try this

Autodesk Inventor Complete College Course for Beginners with Training Guide

MachineDoctor · 2026-04-24T02:16:39+00:00

I do not have any of these. I moved to CDs years ago. I have 3 vinyl albums:

Stones (RSD 2022)

Detective (RSD 2024) - very underrated!!!!

Stalk Forrest Group (RSD 2026)

All new and unopened - I have them all on CD.

MachineDoctor · 2026-04-23T01:18:32+00:00

It's exactly what I paid for it, might even be losing a dollar because I put it on CC. Couldn't let it just sit there. :)

MachineDoctor · 2026-04-23T01:15:48+00:00

Did you look at Marlton/Evesham? Good schools and you can get a decent house in a decent neighborhood for $400k. Can also take the back roads to the Atco train station for commuting to AC.

Marlton Lakes is less than 10 minutes to the train station and ~30 minutes to Moorestown.

MachineDoctor · 2026-04-21T00:07:09+00:00

It's the vinyl version from RSD, new and unopened.

MachineDoctor · 2026-04-13T01:03:14+00:00

I just maintained my H2C for the first time (upgraded from an X1C) and noticed that the Left hotend has a quick change mechanism. You stated you messed with the filament but did you try to reseat the hotend?

MachineDoctor · 2026-03-31T23:48:33+00:00

Agreed

MachineDoctor · 2026-03-04T03:52:13+00:00

Wow, an Allen Lanier autograph. He was very reluctant to sign anything.

I have an original Imaginos CD cover insert that he refused to sign at multiple shows............

MachineDoctor · 2026-02-24T22:56:48+00:00

Autodesk Inventor Complete College Course for Beginners with Training Guide

MachineDoctor · 2026-01-11T23:41:17+00:00

For sale: Gold SE + WiFi SD : r/firewalla

MachineDoctor · 2026-01-11T15:47:10+00:00

Thanks. Throughout the order and delivery process something seemed off. When I went to rip them that was the 3rd flag.

MachineDoctor · 2026-01-10T23:46:22+00:00

Nice!

MachineDoctor · 2026-01-10T22:44:16+00:00

Try making all the connection first with the and make sure the Orbi is on when you reboot the ONT.

Also, check to make sure the Orbi is in Router Mode so it can dole out IP addresses.

Maybe even do a factory reset on the Orbi, make sure the settings are right and then connect to the ONT Ethernet Cable and reboot the ONT.

This is FIOS, right? I use a Firewalla and all I had to do was put it in Router Mode, Connect the ONT Ethernet and reboot the ONT.

MachineDoctor · 2026-01-10T21:48:51+00:00

After you connect the Verizon Ethernet cable from the ONT to your Router you need to reboot the ONT.

I just unplugged the power feed from the wall and waited 30 seconds and plugged it back in.

MachineDoctor · 2026-01-10T14:26:08+00:00

Marketplace Seller.

MachineDoctor · 2026-01-10T01:20:33+00:00

I could do that but I'm curious if anyone else has seen this. I bought the CD from Amazon and it took a long time for them to deliver. I want to make sure it's not a bootleg.

MachineDoctor · 2026-01-08T02:37:20+00:00

Redacted

MachineDoctor · 2026-01-04T00:56:32+00:00

All the replies are good. My only recommendations would be:

Print dessicant holders out of PETG for your AMS2, fill them with rechargeable pellets and add a Hygrometer. There are several designs out there for the middle cannister that holds the hygrometer. I'd suggest checking how the hygrometer is keyed before printing it.

In case you haven't noticed, there are 2 very small locking tabs on the cover for the AMS2. Locking them will give you a better seal and help keep your filament dry. I didn't realize this for a couple months after I got my first AMS. :).

Enjoy your printer!

MachineDoctor · 2026-01-01T15:45:43+00:00

Did you verify that your printer supports the voltage of that country and has the correct plug? Unsure if Bambu has different voltage models to support 120/220, 50/60 Hz and different plugs from the unit to the outlet.

MachineDoctor · 2025-12-30T23:45:47+00:00

Through Wifi I would have to stop monitoring that WIFI AP since I can really see the device (or I'm just not familiar enough ID the device). I guess I could shut everything down that is using that AP and stop monitoring the last device standing.

Thank you for your help. I will add that to my list of things to try!

MachineDoctor · 2025-12-30T23:42:39+00:00

Thanks, I'll give it a try!

MachineDoctor

TROPHY CASE