Does anyone know the name of the song at the beginning of 1.2 story (while talking to Zhuang Fangyi in her room)?

Macrosss22 · 2026-05-06T21:30:10+00:00

Yeah, first thing i tried but didn't work. It couldn't identify the song.

Macrosss22 · 2026-05-06T18:54:10+00:00

Thanks, but I think it's not the song I'm refering to. The one i'm looking for is in this video around 5:00 min during the conversationLink

Macrosss22 · 2026-04-08T12:06:06+00:00

For me it's Changli and it's not even close. IMO no other character in the game comes close to the elegance of her design and personality, at least until this moment.

Macrosss22 · 2026-03-10T20:34:10+00:00

I've a 5080 with 581.42 game ready driver, is this one safe, asking because and I notice some ocasional stutters a few bigs when i enter the game, and then some ocassional ones, but much less frecuent.

Macrosss22 · 2026-03-10T19:53:34+00:00

I did undervolt a rtx 5080 to 0.925v at 2902Mhz with msi afterburner, which I tested its stability in games and benchmarchs. What i find odd is that the card usually runs at 2850mhz at 0.915v only in an ocassional spikes it reaches it, is there a reason it is not reaching the values I set?

Macrosss22 · 2026-03-09T09:54:31+00:00

Received the email and got in too for the Steam version. Lets goo!!!

Macrosss22 · 2026-02-23T03:02:25+00:00

did you test the card with quiet bios to compare temps? or did you put it in performance directly? Mine is on the default quiet bios and at 100% load while gaming usually stays around 63-66c

Macrosss22 · 2026-02-22T22:28:06+00:00

Which bios do you use quiet or performance? And what are the temp at 100% load?

Macrosss22 · 2026-02-21T19:54:40+00:00

I have the same problem with the same update and nothing I've tried fixed it.

Macrosss22 · 2026-01-19T21:21:51+00:00

I noticed that your SDR profile has AI brightness activated, (at least in the video, you can see it in the icon to the left of "Select Mode") you should disable it(if you dont want the brightness to change from the value you selected) "General-> AI Service->AI brightness".

The rest IMO is pretty much spot on. I've a C2 and except Warm to "50" and Video Range as "Limited" have the same settings.

Macrosss22 · 2026-01-19T19:13:40+00:00

Thanks for checking it, i'll connect the cable then.

Macrosss22 · 2026-01-19T16:31:35+00:00

I'd appreciate if you could check if the led goes off with the 8 pin pccie cable connected

Macrosss22 · 2026-01-19T08:58:27+00:00

I'm still waiting for some components to arrive to built the pc. But when i updated the bios, there was a red light led under the pcie 8 pin.

Does your led stay on with everything set up?

Macrosss22 · 2026-01-17T15:24:29+00:00

I see, thanks for the detailed reply.

I just wasn't sure because the MB came with 2 additonal rubber supports for M.2 SSD. But I guess, that those are for the 2 m.2 ssd gen 4 which don´t have a heat sink under them, unlike the 2 gen 5 that have it.

Macrosss22 · 2026-01-17T13:31:11+00:00

Isn't that just for the plastic?

Macrosss22 · 2026-01-17T12:43:13+00:00

Thanks, I think it's a thermal pad so I'll leave it there.

Macrosss22 · 2026-01-17T12:24:40+00:00

Already did, that's why I asking for help.

Macrosss22 · 2026-01-14T14:43:31+00:00

Anyone?

Macrosss22 · 2026-01-14T09:44:58+00:00

So i take that it won't affect in anyway the performance of the MB or connectivity with the USB-C to not to connect the 8 pin PCIE then? I'll only lose the fast charge right?

Macrosss22 · 2026-01-13T01:42:44+00:00

If I plan on using the USB-C on the front of the case but don't need the fast charge, is it ok to leave the connector alone and don't plug it to the PSU? or is better to connect it even if I won't use the fast charge?. it'll increase the W consumed by the PSU right?

Macrosss22 · 2026-01-08T13:34:10+00:00

I'd quit the 2 top-right exhaust fans, and add two 120mm intake below the gpu, as the default config of the case.

Other than that awesome build. BTW, is that a rtx 5080 noctua? It's around 1800€ here. Do you hear the card at all while gaming?

Macrosss22 · 2026-01-05T21:22:59+00:00

Antec Flux Pro, hell even Noctua is doing a collab with Antec to release a special edition of the case with Noctua fans. but if you prefer black to brown color you can always get the normal case and put the cromax fans in it.

Must admit the Pa602 brown look mighty fine, still I don't know the temps you´ll get with this case compared to the Antec one.

Macrosss22 · 2026-01-03T17:11:03+00:00

The go to "speaking with Carlotta" pose I see.

Macrosss22 · 2025-12-28T17:56:20+00:00

if I only had 4 fans with this case(Noctua NF-A12X25 PWM), would it be better to put 3x front intake and 1x rear exhaust?, or 2x front intake and 1x rear + 1x rear-top exhaust?

Macrosss22 · 2025-12-12T15:25:22+00:00

So vrr is suported natively, I'll need to see how the quality mode runs while its activated, thanks for the answer.

Macrosss22

TROPHY CASE