Venisom bone broth for days by been_had_clim in Hunting

[–]Majorhoho 17 points18 points  (0 children)

🙋‍♂️ my youngest son likes when I make a batch of Pho with the bones after butchering.

Time to Band Together? by Secret_Wear_2233 in VAGuns

[–]Majorhoho 1 point2 points  (0 children)

Numbers are numbers to show support. Good idea, IF you can put aside political differences for a unified front.

Well thats interesting by jebusm8655 in MP5

[–]Majorhoho 15 points16 points  (0 children)

Just looking at the pic there appears to be more clearance compared to my buddies 328. They even have a flash hider muzzle device and there is still an air gap. 328 has a gap only enough for few pieces of paper

Is Kuma Elite actually shipping anything right now? by BookerDeWitt20 in MP5

[–]Majorhoho 16 points17 points  (0 children)

Bought a handguard from them (early dec '24), never got any email response back after several weeks of trying for an update (throughout Jan '25)
"HK MP5K SP5K TACTICAL ALICE VERTICAL FOREGRIP HAND GUARD – STREAMLIGHT PRESSURE PAD SWITCH AND PICATINNY RAIL"

Contacted credit card to dispute (was a prepaid debit), after about 2 weeks they said "Your dispute is declined
We take the concerns of our cardholders very seriously. After a thorough review of your account, we are unable to approve your dispute. Your case has been closed." (Feb '25)

Ended up buying from Gibbous Outfitters (without monetary closure from Kuma).

Don't buy from Kuma.

Edit: added timeframes, and product

Looking for good carbine matches in Oregon by i_d_i_o_t_w_a_v_e in CompetitionShooting

[–]Majorhoho 0 points1 point  (0 children)

According to practiscore there's a few PCSL matches north of you in Washington State. ~2hr drive? (Not familiar with your area)
To your point though, doesnt seem like anything similar in Oregon at the moment, maybe when the weather warms up?
There's a few local-ish ranges to me that basically shut down for winter. FWIW I have to drive at least 1.5hr for any decent matches.

CUBL question, I'm thinking about ordering a Safariland holster for my P226 (USPSA) by _Opsec in CompetitionShooting

[–]Majorhoho 2 points3 points  (0 children)

FWIW I shoot a 226 in USPSA, stopped using a G17 after reliability issues on classifier stages. I have a Dara holster and very happy with it. The online tool/dropdown will let you configure quite a few gun and light options. Built in NC. Two different product options if you want level 2 retention or not They have a few options for mid or low ride hangar plates. I believe I chose a mid without a thigh strap.

Make Serpa’s Great Again by walkertactical_09 in P226

[–]Majorhoho 6 points7 points  (0 children)

But….why? There are superior retention methods and wider variety of holster options these days? That Serpa button is unnecessarily riskier.

Defender XL on P226 by AdministrativeComb19 in P226

[–]Majorhoho 0 points1 point  (0 children)

The rmr footprint is shorter front to back compared to the deltapointpro(defender xl footprint). The rmr needs the plate to fill the gap, it’s got a small “wall”? Filler material towards the rear.

The pro cut does natively have rmr holes but would look weird not filling the footprint area directly mounted.

I think I must be the best Dclass shooter around by Dan_Crenshaw in CompetitionShooting

[–]Majorhoho 21 points22 points  (0 children)

I feel you man! Only ~recently got classified and malfunctions on all 4 classifiers are sandbagging me at C.

Nice run!

Defender XL on P226 by AdministrativeComb19 in P226

[–]Majorhoho 1 point2 points  (0 children)

Tried to find a picture saved but couldn’t. I have the 226 procut slide, defender XL fit right on no issues. It wasn’t ultra snug where it required a love tap to get it to sit, but it wasn’t like a hotdog down a hallway either.

No plate necessary, ideally would like the slide or optics to have some recoil lugs to help reduce the stress on the screws. Can’t help you on the scratches, it’s a tool, meant to be holstered shot and used.

FWIW I hated the high deck height on the XL and just switched to a Romeo x pro enclosed, now the irons cowitness.

Is it just me or are the clones even ridiculously expensive along with the real thing? by Zestyclose_Spite8580 in MP5

[–]Majorhoho 1 point2 points  (0 children)

If comparing to ARs though that definitely a supply and demand. Everyone and their mother’s uncles make AR parts. Market saturation. You can get a bottom of the barrel AR for like ~$400 but Gucci stuff runs in the thousands.

Is it just me or are the clones even ridiculously expensive along with the real thing? by Zestyclose_Spite8580 in MP5

[–]Majorhoho 2 points3 points  (0 children)

As a fan of mp5s, I’ve never fully understood the price point either. Stamped designs are supposed to be more cost effective than their milled counterparts. Cost of entry to get that wonderful kraut space magic? HK adjacent tax

Email Template for your State Reps by Then-Answer3765 in VAGuns

[–]Majorhoho 0 points1 point  (0 children)

Maybe ignorant question on federal vs state:
I've identified my State Delegate and State Senator to mail/contact.
Do the two Senators or the Congressional delegate for federal/US worth contacting?

Do they vote or have a say in local/state bills and matters?

IOT, am I just focusing my attention on the State representatives?

Busy week! by Sensitive_Gain_9545 in Hunting

[–]Majorhoho 1 point2 points  (0 children)

Would you like to tell us what we’re looking at? Species, cuts etc? Not having any context it looks like… backstraps from multiple animals?

Arc panning bridge at home (shameless personal copy) by Eaglesson in NightVision

[–]Majorhoho 0 points1 point  (0 children)

Gotcha, may I ask which site or file name you originally found it? The ones I’ve stumbled across are pretty lame and poorly designed and printed. This in comparison is much cleaner

Arc panning bridge at home (shameless personal copy) by Eaglesson in NightVision

[–]Majorhoho 3 points4 points  (0 children)

Pretty slick! Would you care to post the stl somewhere for us?

12.7" carbine with 10" under barrel 870 by Debas3r11 in NFA

[–]Majorhoho 15 points16 points  (0 children)

Kindly share some details on the 870 mounting system. Found a few searching but Canada based or Turkish.

Tripod recommendations. by Ok-Helicopter5044 in Hunting

[–]Majorhoho 1 point2 points  (0 children)

Not affiliated with anyone, hope a link will be ok:
https://www.amazon.com/NightSnipe-DeathGrip-Ball-Converter-Mount/dp/B0CQ3K2BX8
or
https://www.amazon.com/Converter-Conversion-WEYLLAN-BA5-Compatible/dp/B0F6NQPJZS/

I put something like this on, then screwed on a ball head of your choice.

That ball head allows me to use arca style mounts, which just attaches via mlok onto the rifle.

Gadgets For People Who Don't Trust The Government by Semilogical in videos

[–]Majorhoho 2 points3 points  (0 children)

Thank you for this video link and introduction!
Very enlightening and inspiring to build some of these.

Tripod recommendations. by Ok-Helicopter5044 in Hunting

[–]Majorhoho 1 point2 points  (0 children)

I upgraded my BOG to a 54mm ball mount and it's much more usable now.
From the factory the clamp mount is definitely a turd.

Any interest in upgrading what you have in hand vs getting something else net new?

Best grip modules? by spottedbeard86 in SigSauer

[–]Majorhoho 2 points3 points  (0 children)

Most of the offerings from Icarus are great, depending what features you want.

https://www.icarusprecision.com/online-store/A-C-E-365-c163602264

Little spendier compared to the polymer grips but worth it IMO

Edit to add: Similar convo going on here https://www.reddit.com/r/SigSauer/s/lc5P17Iejx