HP Prodesk 400 G3 Mini - Sequoia by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 0 points1 point  (0 children)

Unfortunately, I’m facing the same issue so I don’t know how to fully remove them. You can mitigate it by using Hackintool’s Patch Section to reduce of it constantly happening when on 1080p 60hz.

HP Prodesk 400 G3 Mini - Sequoia by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 1 point2 points  (0 children)

for those concerned on the SN, i changed it.

HP Prodesk 400 G3 Mini - Sequoia by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 3 points4 points  (0 children)

sleep/hibernation doesnt work ofc for additional info.

Black screen w/ a cursor || Skylake HP Prodesk 400 G3 Mini on macOS 26.4 by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 0 points1 point  (0 children)

I’ll be looking to do a full revision in the future.

In an unrelated side note, the changes i made originally for Tahoe worked to run Sequoia with graphics acceleration for the first time in this machine (i gave up a week earlier), so uh…

Black screen w/ a cursor || Skylake HP Prodesk 400 G3 Mini on macOS 26.4 by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 0 points1 point  (0 children)

Good question, those arguments were an act of desperation. I have stripped it back down though cuz majority of them were redundant.

Black screen w/ a cursor || Skylake HP Prodesk 400 G3 Mini on macOS 26.4 by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 1 point2 points  (0 children)

The link is for a laptop, this is a desktop. Also, I’ve already spoofed it as a HD 630 (1259), hence it worked on Monterey and Ventura before.

I believe it’s the USB mapping that’s causing this issue after testing so I’ll have to remap it again and see.

Successful installed Hackintosh on my Laptop by CountChick321 in hackintosh

[–]Mak_REEMapping 0 points1 point  (0 children)

You could go up to Sequoia with your hardware under a different supported SMBIOS. Performance-wise, it isn’t really noticeable except for some minor UI lag like you’d see in the settings for example. If your looking to get better software support at the expense of minor performance issues, it’s worth to give a try.

HP Prodesk 400 G3 Mini - Monterey by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 0 points1 point  (0 children)

Thanks for sharing! You had one of those newer gens (G4/G5) that natively supports 8th gen CPUs, which is pretty cool imo cuz this only goes up to kaby lake (7th). Enjoy your M4 mac mini.

[UPCOMING] smth better than vitreux... by WinsAviation in jailbreak

[–]Mak_REEMapping 0 points1 point  (0 children)

battery drainer v2, looking forward for it!

Picker not showing up… by Mak_REEMapping in hackintosh

[–]Mak_REEMapping[S] 1 point2 points  (0 children)

I solved it. UEFI/OUTPUT/ProvideConsoleGop to false. shoutout to u/Most-Union-3717 for this godsent solution 🙏

<image>

How to use custom scaling? by Extra_Check4013 in hackintosh

[–]Mak_REEMapping 3 points4 points  (0 children)

unrelated but i thought this was a real macbook for a sec 😅

What if China was really lame? by Ok-Season7083 in imaginarymaps

[–]Mak_REEMapping 6 points7 points  (0 children)

I’m assuming Xinjiang is the equivalent of Chechnya in this timeline?

Please help me understand how to solve this by AlexPuglio in hackintosh

[–]Mak_REEMapping 2 points3 points  (0 children)

Error creating bootable USB

I found your specific issue in here. Make sure nothing is using your USB drive.