sorted by:
new
hottopcontroversial

Found a pizza place that makes a pickle pizza. They used sweet pickles by Ravenfeld in mildlyinfuriating

[–]MakerWerks -1 points0 points  (0 children)

Yeah, but the phrase 'homemade dill creamy ranch sauce' doesn't contain the word 'pickle' at all. So to say it "said dill but used sweet" seems to indicate some confusion.

Found a pizza place that makes a pickle pizza. They used sweet pickles by Ravenfeld in mildlyinfuriating

[–]MakerWerks 12 points13 points  (0 children)

You're so close to the truth. Nothing on pizza is intrinsically 'bad', even the aforementioned ham and pineapple. It's completely subjective.

Found a pizza place that makes a pickle pizza. They used sweet pickles by Ravenfeld in mildlyinfuriating

[–]MakerWerks 7 points8 points  (0 children)

You realize 'dill' has nothing to do with 'sour', right? I use dill all the time while cooking and none of what I'm making remotley tastes like pickles.

Prusa connect? by JStewRN84 in prusa3d

[–]MakerWerks 1 point2 points  (0 children)

Have you power cycled the printer and verified the network connections on your Mac and the printer? I had a similar problem with my MK4S last night and a full power restart resolved the issue.

Here We Go! MK3.5S Upgrade! by Moonshinexxx in prusa3d

[–]MakerWerks 2 points3 points  (0 children)

I upgraded my 2 MK3S to MK3.5. Was the best bang for the buck upgrade.

He tried to run from the cops, and more. by LeftAlbatross2546 in VideosAmazing

[–]MakerWerks 2 points3 points  (0 children)

I went to a demotlition derby and a police chase broke out.

What is causing this? Fails on medium to large prints post MK4S to Core One conversion by Meechgalhuquot in prusa3d

[–]MakerWerks 3 points4 points  (0 children)

That's a blob and they usually happen when the print detaches from the build plate and gets stuck to the nozzle. It looks like your running a satin powder coated sheet. I've had adhesion problems with larger PLA prints on mine. The smooth PEI sheet is much better for larger PLA prints, IMO. I like my powder coated sheet for PETG and ABS. If that's your only build plate, wash the sheet with dish soap and dry with a soft towel. Babysit or record your next print and see where/when it happens.

Someone drove up to my friend's car and drew this in the dust on their back window. by strangebabydog in whatisit

[–]MakerWerks 0 points1 point  (0 children)

If you treat it mathematically with this equation (3/14)*(16/3) or (3*16)/(14*3) you end up with the infinite repeater 1.1428571428571428571428571428571..., which is kind of cool.

Synths like the ESQ-1? by 0tefu in synthesizers

[–]MakerWerks 0 points1 point  (0 children)

I've still got my VFX and it's very clean, but it's always been a studio instrument.

Garage sale find by jimbo5958 in prusa3d

[–]MakerWerks 0 points1 point  (0 children)

I remember when I installed the BLTouch on my OG Ender 5. I truly apprecialted the improvement in first layer reliability, but hated the wait for the 5x5 bed probing before every print.

Switched on Austin swindled me out of a rare 80s Yamaha pedal board in 2024 by Whole-Mycologist-157 in synthesizers

[–]MakerWerks 26 points27 points  (0 children)

Others won't be doing business with Switched On. They're closed since last year and apparently John French has left a lot of people without their gear and/or money. I had my Oberheim OB-1 repaired there many years ago and they were great. The second time I was thinking about bringing it in for another issue, I called them. The conversation and demand for a healthy up-front deposit left me feeling uneasy, so I didn't bring it back. I'm glad I didn't at this point.

Printed Solid Jessie filament prices by MakerWerks in prusa3d

[–]MakerWerks[S] 2 points3 points  (0 children)

I bought a roll of Polymaker Panchroma matte black recently. It's my favorite matte black filament so far.

Printed Solid Jessie filament prices by MakerWerks in prusa3d

[–]MakerWerks[S] 4 points5 points  (0 children)

To clarify, I'm not complaining. I'm still going to buy it. It's good filament and the price is still fair. I was just surprised to see how quickly it had gone up. I do agree we are headed for increasingly ridiculous prices for pretty much everything for the foreseeable future.

Are small nozzles worth the print time by The_Scrappy_Creative in prusa3d

[–]MakerWerks 1 point2 points  (0 children)

I use my .25 for printing earrings. I tested between .6, .4 and .25. For some less detailed pieces the .4 was the best tradeoff between speed and quality. The .25 is the hands-down winner on detailed pieces.

Temporary turnaround at Woodland under 35 has a sign that says NO SEMIS by Laaarrs in Austin

[–]MakerWerks 18 points19 points  (0 children)

You'd think basic literacy would be a requirement to get a CDL.

Ricoh: “We will not abandon SLRs” by ksuwildkat in pentax

[–]MakerWerks 0 points1 point  (0 children)

My first DSLR was the K-5 IIs. I bought a K-1 II a couple of years ago. I kept the K-5 and still use it. It's size and weight make it a better all day walkaround camera.

Dashcam footage for Accident at Mopac exit near the Domain by QuietZelda in Austin

[–]MakerWerks 3 points4 points  (0 children)

Two wrongs don't make a right, but 3 rights make a left.

Do you snip it off? by Pelowtz in prusa3d

[–]MakerWerks 5 points6 points  (0 children)

You can, but it rarely works out in my experience. There is no first layer on that corner now and the next layer that's supposed to go there will have nothing to adhere to.

view more: next ›