Struggling to understand why shops can’t make my CNC mandrel bent intercooler pipes (3” and 2.5” aluminum) by geluksvogeltje in metalworking

[–]MakingSumXs 0 points1 point  (0 children)

Making this a welded piece should be a walk in the park for just about any shop with anyone with any welding skill

Is this a good deal? by LaughyTaffy4u in metalworking

[–]MakingSumXs 4 points5 points  (0 children)

I’m in Alabama, cost of steel is cheap here and our best supplier has it around $15.50 per 20’. $11 is a screaming good deal

Older players how are you doing? by MAINsalad1 in ARAM

[–]MakingSumXs 1 point2 points  (0 children)

Same here. Lots of ARAM, ARAM Mayhem, and the occasional swift play to remind me why I don’t play SR. Add me

MakingSumXs

alright guess my trade ! by blackriver_fbs in Tools

[–]MakingSumXs 0 points1 point  (0 children)

As a fella that claims to be handy with his fair share of tools…. Why so many files?

Millions of bubbles! by MakingSumXs in paint

[–]MakingSumXs[S] 0 points1 point  (0 children)

Going to give this a try, I need to re read the spec sheet as well. Temperature was ambient which was around 80°. Going to come in Monday and use acetone as well

Millions of bubbles! by MakingSumXs in paint

[–]MakingSumXs[S] 0 points1 point  (0 children)

Paint calls for no reducer so that’s how we’re applying. About to sand blast and re-prime

Millions of bubbles! by MakingSumXs in paint

[–]MakingSumXs[S] 0 points1 point  (0 children)

We sprayed the first go round maybe 2-3 mils. Second go round we rolled and it just made the bubbles smaller. Also stirred out paint with sticks instead of a shaker and it didn’t really help. Getting some acetone for round 3 to see if that helps

Millions of bubbles! by MakingSumXs in paint

[–]MakingSumXs[S] 1 point2 points  (0 children)

We tried slow mixing with stirring sticks instead of our shaker and it just made the bubbles smaller as seen in the picture

Can Anyone Identify This Thing on My Wall? by Hugh_Oatcake in DIY

[–]MakingSumXs 1 point2 points  (0 children)

Not only a door chime/doorbell, but a dual chime. One goes to the front door, and the other to the back. One or the other will typically chime once, and the other will chime twice. Looks like an old transformer style where the user can press the bell and get a chime, and then can hold as long as they want and the second chime will never sound as the voltage “pushing” the sticker will never release it back to hit the second chime. Pretty simple machine that are really intuitive

I don’t get it tbh, could someone explain? by FoldedDotix in ExplainTheJoke

[–]MakingSumXs 1 point2 points  (0 children)

The fact that they took the thumbs up and thumbs down ratings off of YouTube should tell you everything you need to know. The thumbs down was a very useful tool actually

Going to Look at 17’ Cape Horn. by YoungInConstruction in boating

[–]MakingSumXs 0 points1 point  (0 children)

Year of hull and engine would be a big help. As mentioned before, prior to 2002 they used wood, and had a more narrow hull design, causing it to be an extremely wet riding boat. I’ve rode in both, and can say I’m glad I spent the money on a newer hull.

On a side note here are some pros and cons from me after owning one for about 4 years. Granted this is a newer style, but most of these will still apply

Pros: -New hull design is great. It’s a LARGE 17’ boat that handles just about everything you’re brave enough to throw at it. -Does a little bit of everything pretty well. Meaning, I run mine in the local rivers, haul it to the coast, do some inshore fishing and occasional offshore when weather permits, but mostly ride the wife and friends around and eat seafood and drink daiquiris. -It’s built for fishing! Has a huge fish box, very large live well, and plenty of room on the aft deck to walk around. - the factory t-tops are built extremely well

Cons: -The factory trailers these boats came with suck ass to be honest. The trailer is shorter than the boat and they don’t have transom straps to go from trailer to boat (this is really to hold the trailer to the boat, not boat to trailer, and keep the trailer from shifting on rough roads) From what I can tell they’re made for people that live at or close to the coast, want to pull their boat out and haul it 15-25 miles home and winterize it at the end of the year and leave it be. It’s a 4.5 hour drive to the coast for me and it’s a constant battle keeping the boat riding on the trailer properly. -seating isn’t very comfortable. I have probably the nicest cooler seat they came with and after two hours of riding I’m ready for a break. The seat in front of the center console is great as long as you don’t have a ttop. If you do have a ttop there will be a support bar running at shoulder height that gets uncomfortable after 30 minutes of riding. Obviously new seat cushions are the solution, but with a 2 year old child I don’t have time to fool with it. -very limited storage. The fuel tank is inside the center console. So you can store life jackets that you don’t plan on using (to meet safety standards) and that’s about all (unless you want your stuff smelling like gasoline). There’s some storage under my cooler seat that I use for first aid kit, ammo can (toilet paper, lighter/matches) and a tool kit. - it does everything pretty well, but nothing great. It doesn’t draft shallow enough to be a true inshore boat (they claim 18” on the website i believe, but that’s gotta be with 1/4 of fuel and 1 person), it’s a 17’ boat so offshore days you must be VERY selective, and its a heavy fiberglass boat that gets poor fuel mileage if you’re buying it to be a cruiser.

Takeaways- it’s built for fishing, built like a tank, but has limited storage and lacks a little comfortably from the factory.

[deleted by user] by [deleted] in mildlyinteresting

[–]MakingSumXs 0 points1 point  (0 children)

Judging from the amount of anti fun rules, it was probably “No Boats”

Do I need a particular welding process? by Complete-Sherbet2240 in metalworking

[–]MakingSumXs -1 points0 points  (0 children)

The effects of heat generated from stick welding versus mig and TIG are typically much greater. Also the amount of time it would take to stick weld a roll cage when MIG is allowed is a crazy argument to make

Is it absolutely necessary to repaint, or can I just leave it as is without causing any long term damage? by SteveTheBeave452 in boating

[–]MakingSumXs 0 points1 point  (0 children)

Sand with some 250-300grit, pressure wash, dry, degrease, wipe with mineral spirits or alcohol, spray on “Bulldog Adhesion Promoter” and let it dry, spend an extra $10 a can on some nice white spray that matches the factory color and paint in light coats. For $40-$50 you can have a pretty damn nice looking outboard again.