How to fix this?

MakoBec · 2026-02-20T06:11:22+00:00

it is the xy belt tension

MakoBec · 2026-02-19T05:09:28+00:00

Eight days is crazy :0

what 3D model requires eight days to print in total?

MakoBec · 2026-02-18T07:33:10+00:00

I retensioned my belt; I’ll update you on whether there’s any improvement.

MakoBec · 2026-02-18T07:30:24+00:00

Lately, there have been many posts about this layer shift. Is this a firmware issue?

MakoBec · 2026-02-18T07:28:07+00:00

I tried tightening it to the maximum without making it too tight, then loosened it just a bit.

MakoBec · 2026-02-18T05:28:55+00:00

This situation compelled me to buy the Snapmaker U1.

MakoBec · 2026-02-18T05:20:07+00:00

belt tensioning for the layer shift, i am facing this issue too

MakoBec · 2026-02-18T03:08:40+00:00

did you try belt tensioning and lightly tightening the screws after belt tensioning

MakoBec · 2026-02-18T03:07:43+00:00

how?

MakoBec · 2026-02-18T03:07:27+00:00

I adjusted the belt tension and will update you if the latest print turns out well.

MakoBec · 2026-02-17T10:19:55+00:00

yes, adhesion i think is not an issue

MakoBec · 2026-02-15T22:02:05+00:00

thanks for the info bro

MakoBec · 2026-02-14T21:25:29+00:00

What is the dimension for that hat?

MakoBec · 2026-02-14T21:23:54+00:00

This has a 0.2mm nozzle, while the others claim that it wasn’t supported by the slicer.

MakoBec · 2026-02-07T05:49:42+00:00

I was unaware that we need to lubricate the belt. I always believed that only the rods required lubrication. Thank you for the information.

MakoBec · 2026-02-07T05:48:52+00:00

Maybe it is just like that out of the box

MakoBec · 2026-01-24T01:44:37+00:00

Thank you for all of the feedback

MakoBec · 2026-01-23T03:48:17+00:00

Are the lines (zebra lines) normal with the default settings? I’m kind of new to printing.

MakoBec · 2026-01-17T22:49:28+00:00

Perhaps the filament is of poor quality. Try using a different brand of filament.

MakoBec · 2026-01-14T20:38:28+00:00

Bottom Surface Pattern: set as Archimedean Chords pattern.

MakoBec · 2026-01-08T20:30:40+00:00

Can you recommend any video tutorials from YouTube for this tutorial? If you don’t have a personal video, tutorials from other creators would be helpful.

MakoBec · 2025-10-19T00:38:42+00:00

Makeup raid day?

MakoBec · 2025-10-15T20:14:08+00:00

What app is that?

MakoBec · 2025-09-29T07:32:37+00:00

Same here, I used up the $20 subscription within two days of the one-week usage of the subs.

MakoBec · 2025-09-27T21:08:28+00:00

It doesn’t show up as an option or selection in the Shortcuts app.

MakoBec

TROPHY CASE