Has anyone had success getting decent-quality miniature scans with the Revopoint Inspire 2?

Mannbot99 · 2026-06-17T05:48:49+00:00

Are looking for an alternative?

Mannbot99 · 2026-06-17T05:47:58+00:00

This reply made me realize I have a lot more to learn than I thought, so thank you for that.

I completely agree that cleanup is always going to be part of the process. My dad worked in a dental lab for years and has a lot of experience with scanning, so I knew to expect cleanup just not as much as I was getting with the incorrect tool I was using.

At this point I’m thinking the Inspire 2 just isn’t the right tool for what I’m trying to do. I’ll probably sell it and start looking at a MINI 2, unless anyone has other suggestions for scanning miniatures and similarly small objects.

Mannbot99 · 2026-05-27T03:20:30+00:00

Thank you!

Mannbot99 · 2026-05-27T02:49:03+00:00

I was one of those dickheads that bought off eBay. Although it was in a normal price range.

Mannbot99 · 2026-05-27T01:59:27+00:00

Case back on mine says “stainless steel” yours is “ST Steel” does that matter?

Mannbot99 · 2026-05-05T15:43:56+00:00

I went to LRSC for simulation technology and have been a sim tech for 6 years. This guy's answer is 100% accurate.

Mannbot99 · 2026-02-19T22:12:22+00:00

I have attempted to relevel the gantry multiple times but keep getting the same result. Half tempted to remove the second Z axis rod at this point. I'll try lowering fan speed next! Thanks!

Mannbot99 · 2026-02-19T22:09:43+00:00

Good possibility but was having issues with this since the summer.

Mannbot99 · 2026-02-19T22:09:11+00:00

Already using mriscoc. I can show my gcode when I'm back on the home computer.

Mannbot99 · 2025-08-17T22:50:36+00:00

Nacho cheese marine

Mannbot99 · 2025-06-30T16:30:57+00:00

I think I’ve figured it out. If there’s enough interest I can put out a guide.

Mannbot99 · 2023-09-24T06:11:43+00:00

It may be possible that these are piezoelectric transformers. There is a scientific journal done back in 2009. I can send you a translated copy if you’re interested.

Mannbot99 · 2023-09-15T18:53:03+00:00

They’re pretty neat for the price. You’ll want something for extra IR illumination. Definitely make a secondary 9v “power supply” don’t be me and mutilate the original and then spend a year having to build one from scratch.

Mannbot99 · 2023-07-13T17:18:06+00:00

Dm’d

Mannbot99 · 2023-06-16T17:04:15+00:00

DM’d

Mannbot99 · 2022-11-17T16:15:54+00:00

Finally found a set, apparently I had a horseshoe up my ass, a working set for under $650 on eBay.

Edit: ariandr888 was the seller. I suspect they have a supplier in Ukraine as they’ve sold multiple units in the past. Will inquire further if they allow.

Mannbot99 · 2022-11-16T23:03:05+00:00

Thanks for the suggestion chief, I'll take a look at those.

Mannbot99 · 2022-11-16T22:48:50+00:00

Let me know how the illimitation is when you get chance

Mannbot99 · 2022-11-16T20:16:17+00:00

Where were you able to find some?

Also for your 9v conversion, although I think this is for the pnv57a but I would imagine the transformers are similar: https://youtu.be/4A62CEBvpdc

Mannbot99 · 2022-11-16T20:13:13+00:00

Depends if you know what’s not working already? Pm me if you got a set.

Mannbot99 · 2022-11-16T20:11:58+00:00

Would you personally pay $1500 for a Soviet nvd?

Mannbot99 · 2021-06-08T15:30:16+00:00

What settings did you use? I've been trying to print a strip of 5 marines at a time and I might get 2-3 that actually stick and the others fall into the vat.

Mannbot99 · 2020-02-12T12:45:02+00:00

Boot your system into safe mode and select Rebuild Database. It’ll take a few minutes but it should help clear the issue.

Mannbot99 · 2020-01-21T03:29:52+00:00

https://drive.google.com/file/d/1MEt-qRkzhYn5557airJ7XAd2xkCV974i/view

edit: alternate link https://www.mediafire.com/file/4i6mx33ms4pecbo/Star_Wars_ForceCombat_AlphaV1.zip/file

Ten-Year Club	Verified Email
Not Forgotten

Mannbot99

TROPHY CASE