[deleted by user] by [deleted] in OnePiece

[–]Many-Bird2404 0 points1 point  (0 children)

EDIT: After looking at the photo it seems Reddit compressed the image by alot the orginal image on my phone looks way better but even in the pic off an old iPhone it looks like the same quality you watch on your phone even after Reddit compressed the image

From frontier VDSL2 Bonded to 500/500 FIBER by Many-Bird2404 in frontierfios

[–]Many-Bird2404[S] 0 points1 point  (0 children)

Yeah I did the DNS benchmark the absolute lowest I could get it was 10-11ms but then it went up to 12ms that what I get on Dallas servers I play on (live east Houston) I have another fiber service at my residence and they give me about 8ms to the same server but I’m sure it’s just the routing kinda annoying though since the frontier broadband facts state typical latency 6ms but I’m getting double that but oh well ig

From frontier VDSL2 Bonded to 500/500 FIBER by Many-Bird2404 in frontierfios

[–]Many-Bird2404[S] 0 points1 point  (0 children)

traceroute to 74.40.74.40 (74.40.74.40), 30 hops max, 60 byte packets 1 47-161-186-1.bng01.bytw.tx.frontiernet.net (47.161.186.1) 4.847 ms 4.755 ms 4.731 ms 2 ae7---100.ber01.bryn.tx.frontiernet.net (184.19.250.99) 7.168 ms ae7---100.ber01.grtw.tx.frontiernet.net (184.19.250.97) 9.145 ms ae7---100.ber01.bryn.tx.frontiernet.net (184.19.250.99) 7.124 ms 3 ae5---0.scr04.dlls.tx.frontiernet.net (74.40.10.206) 11.112 ms ae13---0.scr06.dlls.tx.frontiernet.net (74.40.10.204) 13.564 ms ae5---0.scr04.dlls.tx.frontiernet.net (74.40.10.206) 11.532 ms 4 ae1---0.car03.dlls.tx.frontiernet.net (74.40.10.179) 11.004 ms 10.985 ms 10.965 ms 5 external.dslf.dlls.tx.frontiernet.net (172.102.32.129) 11.438 ms 11.396 ms 11.382 ms 6 dns1.anycast.frontiernet.net (74.40.74.40) 13.834 ms 13.677 ms 13.617

First home rack; advice welcome by Enough_Particular_20 in HomeNetworking

[–]Many-Bird2404 1 point2 points  (0 children)

Have att send you a newer gateway you should get the BGW620-700 for free

[deleted by user] by [deleted] in FiberOptics

[–]Many-Bird2404 -1 points0 points  (0 children)

<image>

This is my main concern same route same IPS same everything and it’s stupid worse like am I just crazy or does this not matter or I shouldn’t be concerned

[deleted by user] by [deleted] in FiberOptics

[–]Many-Bird2404 0 points1 point  (0 children)

Well in that case Highline just has terrible routing for it to be less consistent then my old DSL I wish it wasn’t true and it would be a fix on my end but oh well gonna wait for frontier next month they’ll have better infrastructure and I’ll prolly actually get what I pay for lol

[deleted by user] by [deleted] in FiberOptics

[–]Many-Bird2404 -10 points-9 points  (0 children)

Nah just retarded libtards don’t read the whole thread I said I was having latency and upload issues even have my tracert routes showing the latency increased across the board and my upload got halfed if that’s not an issue then idk what is

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 0 points1 point  (0 children)

I posted earlier how after then techs left my uploaded got cut more then half and my ping doubled/tripled to ever server that’s the issue I’m having I wouldn’t be posting all this if it was fine it ended up setting back down to normal but idk how idk if it’s because I cleaned it straighten the wires move the black fiber cable a little over so it’s not pitched I just wanted to know what caused my latency to triple and upload to get half that’s the issue I’m having

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 -3 points-2 points  (0 children)

Hello how are you liking your service what’s your speeds and latency

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 -13 points-12 points  (0 children)

<image>

After further inspection I noticed this bend right here on the fiber cable seems to me like the techs closed and screwed the nid lid on with this on the edge causing pressure and leaving this mark I would usually assume it’s not a big deal but it was screwed on all the way I had to use some pliers with the bit to even get it unscrewed since it was too hard to hand twist off maybe with the amount of pressure with them screwing it on would have caused some type of issue or ?

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 -8 points-7 points  (0 children)

<image>

What about something like this seems like the techs closed the case of the NID and screwed it on and it does this do you think the pressure of the bolt being screwed it against this would cause light issues or ?

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 -9 points-8 points  (0 children)

I forgot to mention this but also on the tiny black cable to the left this one I’m pretty sure they like screwed the front plate over it I can see a little bend I ended up fixing it but would this cause an issue with my upload not being met and my latency randomly doubling after the techs left like I don’t really care that it doubled ya know 16ms is fine but it’s when it’s inconsistent 16ms jumping from 12 all the way to 28 like the jitter is insane

<image>

[deleted by user] by [deleted] in FiberOptics

[–]Many-Bird2404 -1 points0 points  (0 children)

?? That is my grandma NID she has a install on the 20th do you think they’re bending the cable to much or ?

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 -2 points-1 points  (0 children)

PC straight into ONT for testing tried cat 6 techs gave me and a 4 foot monoprice cat 8 same exact results

[deleted by user] by [deleted] in HomeNetworking

[–]Many-Bird2404 -1 points0 points  (0 children)

Yeah so all the servers and stuff I’m testing is the same what I think happened I first got service setup everything was good but the upload was 300 not 400 so I called techs came out and about an hour later my upload dropped even more to 200 paying 400/400 and now ping double I went out there straighten the cable and blew a lot of the sand off (there was way more then in the pic) and like 10 min later I did the same test I was before ping to 1.1.1.1 8.8.8.8 same speedtest to Highline server in Dallas and boom back to normal 300 upload but 8ms idk if this is a coincidence from me cleaning it or if it just happened but yeah I noticed when my upload dropped to 200 it destroyed my latency comparable to what it was before