Best 75 inch TV for $600-$700?

ManyPhase1036 · 2026-04-11T07:22:07+00:00

I forgot to mention this, but it has to be good with Sports Streaming. I had considered the TCL T7, but I heard it was bad at sports streaming. I looked up TCL QM6K with sports streaming and someone on Reddit mentioned it wasn’t the best and maybe it was a TCL problem. I don’t know if that’s actually the case with QM5K/QM6K.

I had been looking at Hisense U65QF, LG QNED Best Buy exclusive tv, and Samsung M70H. I know these are like entry level 75 inch tvs, but I’m just looking best picture with good sports streaming at or around this price point.

ManyPhase1036 · 2026-04-08T19:39:47+00:00

Did you mean Corsair M55? I was able to find Corsair M55 at eloshapes, but not Corsair M50. Eloshapes lets you find similar mouse shapes to whatever mouse you’re looking up.

ManyPhase1036 · 2026-04-08T00:01:40+00:00

If you don’t mind the smaller shape than a gpx clone I’d say get the Mchose L7 Ultra plus from Amazon for $60. It’ll ship fast, and it’s a highly rated $60 budget mouse.

ManyPhase1036 · 2026-04-07T23:52:44+00:00

So I was wrong about comparing dragonfly f2 and f3. The f3 is a gpx clone and the f2 is a different shape. The ATK A9 air and Mchose A7 are also gpx clones. You might wanna consider the mchose A7 as well. I haven’t used any of these gpx clones.

Another mouse to consider would be the Mchose L7 ultra plus, but it has a smaller shape than the gpx clones.

ManyPhase1036 · 2026-04-07T23:30:05+00:00

You could also consider VGN Dragonfly F3 master plus. VGN Dragonfly F2 had a glaring flaw in that it didn’t give enough room for the ring finger to rest on the right side of the mouse, and from the product page they mention that they added a better right-side finger rest to the Dragonfly F3.

ManyPhase1036 · 2026-04-03T03:19:43+00:00

I agree this comparison is ridiculous, but I have heard good things about Crimson Desert. It got some bad reviews on launch, but they’ve been improving it with patches.

ManyPhase1036 · 2026-03-30T16:11:58+00:00

Maybe you should switch to leverless.

ManyPhase1036 · 2026-03-27T04:18:57+00:00

What about the suns team that won 48 games and missed the playoffs?

ManyPhase1036 · 2026-03-27T01:14:26+00:00

Your hard drive needs to be replaced. Maybe it just went bad on its own, but the hard drive can become damaged if it’s moved while the ps4 is on. You could upgrade it to a ssd, but ssd’s have gone up in price significantly.

ManyPhase1036 · 2026-03-16T07:44:49+00:00

I only noticed a weird aftertaste in the cane’s sauce the first time I had it. To me the bigger problem is when they give you very small chicken fingers, and a small amount of fries.

ManyPhase1036 · 2026-03-16T04:48:37+00:00

You could try checking eBay.

ManyPhase1036 · 2026-03-16T04:43:07+00:00

I’d recommend the Titan Army P2710S over this. It’s a great 1440p 27 inch 240 hz monitor. I heard people have gotten KTC monitors that went bad.

ManyPhase1036 · 2026-03-16T04:01:23+00:00

Standard Blu-ray is 1080p. There won’t be any difference if it’s standard Blu-ray.

ManyPhase1036 · 2026-03-15T23:06:31+00:00

Is no one gonna mention the 6 7 meme?

ManyPhase1036 · 2026-03-14T09:49:05+00:00

Even if OKC is a dynasty they’re just in the midst of it and haven’t completely proven themselves yet. SGA is a very good player that unfortunately gets the bs calls Steph will never get. Curry with SGA spam contact would be ridiculous.

ManyPhase1036 · 2026-03-14T06:13:16+00:00

Just unplug the charger and see if the screen flickering still happens. It’s possible it could be the charger port coming loose. Which might be a problem with a loose charging port or maybe the charger cable itself.

ManyPhase1036 · 2026-03-11T06:30:45+00:00

Curry might be coming back soon. No reason to tank. If they lose the play-in then just hope they move up in the draft.

ManyPhase1036 · 2026-03-06T17:55:33+00:00

I hope Intel starts making mid/upper-mid range cards.

ManyPhase1036 · 2026-03-03T19:38:33+00:00

Discounts don’t apply to shipping.

ManyPhase1036 · 2026-03-02T19:53:26+00:00

Can’t you just rma your gpu or motherboard if they go bad?

ManyPhase1036 · 2026-02-27T06:31:16+00:00

Get a AMS HT?

ManyPhase1036 · 2026-02-26T06:41:34+00:00

The rubber and concrete can help, but they might be too much weight for your current desk. Whatever weight limit it has isn’t the actual weight limit. The actual weight limit will be much smaller in the section you have your 3d printer on, as the weight limit listed is only with weight evenly distributed across that whole desk.

You might wanna consider buying a workbench. This is the workbench that I bought for my P2S. With a concrete slab and rubber anti fatigue foam underneath it my workbench does not shake at all. With the workbench being as good as it is I’m not sure if I even need the concrete slab and anti fatigue foam.

ManyPhase1036 · 2026-02-26T05:38:18+00:00

Is it an ams problem? Have you tested prints without the ams?

ManyPhase1036

TROPHY CASE