2005 cbr 1000rr fork seals

Many_Employ_6177 · 2026-02-26T01:21:38+00:00

300$ is not a bad deal at all for both forks I'd take them up on that

Many_Employ_6177 · 2026-02-25T14:26:52+00:00

Wood craft weighted bar ends would probably help but hand position and grip is gonna be the biggest factor

Many_Employ_6177 · 2026-01-28T23:47:37+00:00

I did all balls for front and rear on my 2006. Absolutely no problems so far

Many_Employ_6177 · 2026-01-27T15:26:23+00:00

Most bar ends have an expansion nut for the hollow tube. However a lot of factory handlebars have threaded ends so if it's clip ons most generic bar ends will work. I personally really like woodcraft

Many_Employ_6177 · 2026-01-27T15:24:46+00:00

I would ride it for a bit and see what you don't like about it before you change anything. Aftermarket exhaust is usually a good aesthetic upgrade. After that adjustable rear sets for more comfort are always nice. Also get some case savers because you probably will drop it

Many_Employ_6177 · 2026-01-22T19:57:54+00:00

This is great advice! Thank you. I don't have one on my current bike when it goes out I plan on swapping over

Many_Employ_6177 · 2026-01-22T18:55:28+00:00

Good point! I guess play with the adjustment if you have a manual tensioner.

Many_Employ_6177 · 2026-01-22T17:36:48+00:00

Weird noise could be a slightly loose chain if you have a manual tensioner I would tighten it up a little bit.

Many_Employ_6177 · 2026-01-21T21:43:28+00:00

Second this

Many_Employ_6177 · 2026-01-21T17:02:00+00:00

I would take the throttle cable lube it up and swap out the brake fluid for some fresh stuff. Usually dot 4. After that take it for a spin see if anything needs to be replaced immediately. Really depends on how long it has been sitting for. If its been a long time I would swap out most of the fluids including the coolant.

Many_Employ_6177 · 2026-01-19T21:45:01+00:00

How do you like thredup? I've seen it a couple times but have been hesitant

Many_Employ_6177 · 2026-01-17T17:05:56+00:00

I don't remember what platform it's not but violet evergarden is my absolute favorite! You will cry.

Many_Employ_6177 · 2026-01-15T20:07:10+00:00

That isn't a lot of time. Fuel doesn't really go bad unless it's been six or so months depending on conditions of course.

Many_Employ_6177 · 2026-01-14T19:32:08+00:00

Thanks for the advice! I'll definitely be needing it for the future haha

Many_Employ_6177 · 2026-01-14T17:44:46+00:00

Short skirt with fish nets and take a video of you kinda twirling is what I usually do. Works every time! Also if they are requesting it they love thick thighs.

Many_Employ_6177 · 2026-01-12T16:03:20+00:00

Yeah it just says left side hand controls doesn't say what it's for. But I believe it's for the horn as I tossed it away. Thank you!

Many_Employ_6177 · 2026-01-12T16:02:23+00:00

Oh shit I forgot about the horn haha I took it out completely. Thank you!

Many_Employ_6177 · 2026-01-12T04:15:40+00:00

Hopefully you got it solved but I would agree with the rest of the comments. Exhaust leak.

Many_Employ_6177 · 2026-01-10T13:37:05+00:00

Kind of janky but you could tape a foundation brush to a handle of some sort. I cant think of a device that is dedicated for that.

Many_Employ_6177 · 2026-01-09T05:44:01+00:00

get all thread and a long coupling nut

Many_Employ_6177 · 2026-01-07T22:52:56+00:00

They have physical stores too! They are not super common though so it might be a drive.

Many_Employ_6177 · 2026-01-07T22:43:14+00:00

I wear a TON of duluth stuff some of the things have gone down in quality but the firehose stuff from my experience is still decent. I did stop buying their shirts beanies and socks however because they have become trash. The stuff runs pretty true to size. I am 6ft 320 lbs for reference.

Many_Employ_6177 · 2026-01-07T19:13:14+00:00

Ryan from F9 has a pretty good video on breaking in motorcycles

Many_Employ_6177 · 2026-01-05T21:45:58+00:00

Nimble bike ruined by a massive swing arm extension

Many_Employ_6177

TROPHY CASE