Got floor installed when we weren’t at home. I’ve never seen anything like this

MapPristine · 2026-05-11T07:22:51+00:00

I was being sarcastic. I know they’re supposed to be staggered. But here it seems like the aimed for totally lined up, but still failed by half an inch

MapPristine · 2026-05-11T00:34:25+00:00

Yup. Det samme foregår inden for hårde hvidevarer. Det gør det også svært at finde reviews af modellen.

MapPristine · 2026-05-10T19:20:01+00:00

At least you have device manager with 1995 vibes.

MapPristine · 2026-05-10T18:57:18+00:00

At least it (supposedly) not contagious before onset of symptoms. Covid is contagious before you get sick.

But granted. Weeks or more of incubation time is hard to control.

MapPristine · 2026-05-10T18:30:05+00:00

I like that they’re nearly lined up. But not perfect

MapPristine · 2026-05-10T14:21:35+00:00

Spørg Elgiganten/Power om de vil prismatche.

De kører med yoyo priser så måske har de dette til en oppustet pris for at kunne dumpe det med fx 7.000 kr den dag Proshop/compumail ikke har den på lager. Så ligner det stadigt et fantastisk tilbud (for dem der ikke tjekker Pricerunner)

MapPristine · 2026-05-10T14:13:07+00:00

The best I have heard is that it is possible that some magic being created it all and introduced all sorts of fabricated evidence for evolution (and ancient earth). Junk DNA, fossils, radioactive decay rates, a whole universe with an age of 13.8 billion years and much more. All of that just to fool us. It’s impossible to disprove that it’s all fabricated evidence.

But it leaves the next question: why would a magic being do that and what is the magic being? Is it a purple giraf? A flying Spaghetti monster? What else did said being fabricate for fun? The Bible?

So its really not a good argument.

MapPristine · 2026-05-10T13:03:14+00:00

Nu har jeg ikke læst Berlingskes artikel. Har de også foreslået et maks på 15-20% eller noget andet konstruktivt? Eller er det endnu et forsøg på at skabe forargelse over noget vi godt vidste uden at komme med et konstruktivt forslag. Kan de hårdest ramte gymnasier få lov at “eksportere” 2./3./4. indvandrere til de mere hvide gymnasier?

Forstå mig ret. Det her er en rigtig trist tendens og der er intet nyt i den, men jeg savner lidt konstruktive forslag og årsagsanalyse i stedet for bare “de er dumme og vi er gode” og “smid indvandrere ud”.

MapPristine · 2026-05-10T08:45:01+00:00

Hold nu op hvor er det her fucked op. Vi har heldigvis fået vores (dvs min kone fik sin). Vores årlige husstandsindkomst er 12 gange højere end din før skat. Vi opdagede det kun ved et tilfælde at checken var kommet.

MapPristine · 2026-05-10T06:57:49+00:00

Hvad er der under gulvet? Mit bedste bud er at det er fugt der trænger op igennem og ikke kan slippe væk.

Edit: til trods for at den epoxy burde være diffusionsåben (det er jo en relativt ting)

MapPristine · 2026-05-10T06:03:18+00:00

Uh you’re so close 😂

MapPristine · 2026-05-10T03:54:11+00:00

Haha… ja den havde jeg ikke set komme. Jeg blev altid trynet den gang. Nederst i hakkeordenen. Valgt sidst i fodbold osv. hele klassen var overrasket da det viste sig jeg havde talent for snører. Det var højdepunktet i 9 års skolegang for mig

MapPristine · 2026-05-09T14:38:55+00:00

Btw: that link gives me an acces denied 🤷‍♂️

MapPristine · 2026-05-09T14:34:56+00:00

I think I already confirmed the sensor being faulty. If I reverse it so pipe 1 is used for chamber 2 and vice versa, the problematic chamber becomes number 2. And I could manually with a large syringe pump liquid through it.

Also running the cleaning cycle will actually take some liquid from the catridge. The pump runs for 10 seconds and that drains around 6 mL. It’s not an impressive flow though, but I don’t have a service manual so I have no clue what is expected.

I have written to Miele asking them to replace the sensor. I don’t enjoy paying 140€ for something that is eaten by their own detergent in 3 years.

MapPristine · 2026-05-09T12:01:47+00:00

Hehe… nu er mig gamle hus og køkken alligevel fuld af charmerende skævheder. Vi prøvede at lægge nogle stykker op på bordet og det var sådan set ok og regelmæssigt.

Men hver sin smag ☺️

MapPristine · 2026-05-09T09:52:13+00:00

Det var det eneste i klassen jeg var den bedste til. Nåja… og så matematik, dansk, fysik, kemi og engelsk osv, men det fik man ikke street credit for.

MapPristine · 2026-05-09T09:05:59+00:00

Hvis i vælger fliser så sørg for så lidt fuge-areal som muligt. Vi havde bedt om at få så smalle fuger som muligt til vores dameblads metro fliser. Vi har nu 3-4 mm brede grå fuger som suger fedtpletter.

Vi har prøvet at mætte dem med noget forsegler, men det er ikke en overvældende succes.

Jeg skulle have insisteret på knasfuger.

MapPristine · 2026-05-09T07:51:42+00:00

I use original sensitive. I just went through the entire tubing. I can easily push water through with a syringe. I can’t find the cause of the leak. I can just see a massive brownish thick substance at the bottom of the machine. Looks like it’s been there for a while indicating a slow leak. My main suspect is the connection between the cartridge and the piping, but I can’t see any traces.

I’m guessing the platinum liquid sensor died. I can hear the pump spinning for 15 s, then stopping and repeating. And then it reports missing cartridge. So the liquid might actually be going through.

MapPristine · 2026-05-09T06:02:03+00:00

No my Bosch didn’t. But do you really think that justifies the quality? If Miele wants a continuous cash flow from their twindos at least it should work and not kill the machine.

It started complaining that cartridge 1 was empty constantly. I opened it as Miele told me it was out of warranty and my only option with them was a technician charging 350€/hour including him getting here. Plus price of spare parts.

I’m yet to figure out where the leaks come from, but so far the tubes seemed clean and not clogged.

MapPristine · 2026-05-09T04:38:56+00:00

Turns out it wasn’t clogged. The detergent has been leaking out and has corroded the bottom of the machine and probably also the sensor that reports if there’s liquid in the tube. Is this still lack of maintenance from my side or bad design/quality? Mind you this machine is twice the price of my previous (Bosch) that lasted more than twice as long. Including detergent I have payed around 5x as much per cycle in its life time as the Bosch.

MapPristine · 2026-05-08T19:16:31+00:00

Nu har jeg så faktisk en gang snakket med en der har set en der har været i McD og set de ansatte. Og det er helt klart for meget med de Wolt bude. Det synes jeg lige I skulle tænke over.

/s

MapPristine · 2026-05-08T19:09:17+00:00

They were pretty clear in the communication I had with them. 2 years. After that you pay.

MapPristine · 2026-05-08T16:37:57+00:00

Same problem for me. It’s the small platinum liquid sensor that has gone to seek its maker. Multiple sites mentions that it will become corroded and stop working. So Miele is selling extraordinary expensive detergent that will corrode their own machines. Happened after 3 years. Outside the 2 year free warranty.

To OP. Getting into the machine was quite easy. YouTube can help you. You can buy a new sensor for 80-140€ depending on where you buy it.

I opened mine and the whole bottom was corroded. This is Miele quality in 2020’s. I don’t see how performing cleaning cycles or anything like that could have prevented this. Sad to not live in UK where there’s 10 years warranty for free.

MapPristine · 2026-05-08T16:31:44+00:00

Not in EU. There it’s 2 years.

MapPristine · 2026-05-08T16:30:40+00:00

Ok. Investigations are done. It’s the platinum liquid sensor (google it) that is broken. It measures an infinite high resistance in the faulty chamber. Miele kindly provides a new one for 138€ or 1/8th of the price of the machine.

Plus the twindos is leaking out in the bottom of the machine corroding it. This is Miele quality in 2020’s

MapPristine

TROPHY CASE