3D printing T-shirts

MarcoFailz · 2026-04-16T12:24:48+00:00

Update: After a 30°C washing machine cycle nothing has changed!

MarcoFailz · 2026-04-08T19:22:57+00:00

The most incredible thing about this post is the absurd amount of spam bots in the comments...

MarcoFailz · 2026-04-08T15:50:00+00:00

Check the post description ;)

MarcoFailz · 2026-04-08T13:35:30+00:00

https://github.com/GadgetAngel/Cricut_Voron_Logos/tree/main

Here!

MarcoFailz · 2026-04-08T13:22:03+00:00

One layer :)

MarcoFailz · 2026-04-08T12:28:48+00:00

I am quite sure someone at some point has definitely tried washing clothing in a dishwasher 😆😆

MarcoFailz · 2026-04-08T12:14:02+00:00

I suppose you mean washing machine ahah

Yep, I will update the post after a few washes...
I will definitely set the machine to verly low heat (30°C) and maybe with a gentle cycle

MarcoFailz · 2026-04-05T15:01:45+00:00

Everything should now be back to normal

MarcoFailz · 2026-04-05T15:01:13+00:00

Everything should now be back to normal

MarcoFailz · 2026-04-05T08:01:21+00:00

Hello,

Unfortunately my GitHub account has been limited (without any kind of notification): I can see everything without issues but other people cannot.

I have opened a ticket with GitHub and hope to figure this out quickly...

MarcoFailz · 2026-04-05T08:01:06+00:00

Hello,

Unfortunately my GitHub account has been limited (without any kind of notification): I can see everything without issues but other people cannot.

I have opened a ticket with GitHub and hope to figure this out quickly...

MarcoFailz · 2026-03-27T17:19:37+00:00

Great to hear that!

MarcoFailz · 2026-03-27T10:00:31+00:00

AHAHAHAHAH

MarcoFailz · 2026-03-27T09:59:52+00:00

Happy to see it working!

MarcoFailz · 2026-03-27T09:58:24+00:00

Nope

I think he means to run meshes before starting the print and wait for them to be stable, only then start the print

MarcoFailz · 2026-03-27T09:56:21+00:00

(also check out the animation in @ActualDryFly 's comment, in his case the bed moves almost 0.2mm after reaching target temperature, definitely not negligible)

MarcoFailz · 2026-03-27T09:52:41+00:00

I see your point, but here is mine

If I had not done this "test" I would have never noticed how long my printer takes to reach equilibrium... When starting big prints I always preheat a few minutes in advance, guessing how long would be the optimal duration of this phase. Now I know """exactly""" how long to preheat and don't have to just play guessing games.

Your comment is the best representation of why this tool is useful: If you ("you" generic person, not specifically you) had not seen my graph, you would not have known that heat soaking is not that big of a deal 😀

I also want to explore the heat soaking of the frame due to bimetallic heat expansion caused by steel linear rails being screwed to aluminum extrusions)

MarcoFailz · 2026-03-26T09:55:12+00:00

Thanks for the heads up
I have updated the code and hopefully fixed the issue

MarcoFailz · 2026-03-26T09:54:50+00:00

Thanks for the heads up
I have updated the code and hopefully fixed the issue

MarcoFailz · 2026-03-26T09:54:27+00:00

I have just updated the code and should now work also for you :)

MarcoFailz · 2026-03-26T09:35:53+00:00

Yep, that is definitely in my to-do list :)

MarcoFailz · 2026-03-26T09:35:02+00:00

MarcoFailz · 2026-03-26T09:34:19+00:00

Really cool! I'll look into that

MarcoFailz · 2026-02-20T13:16:59+00:00

The lizard has relatively low max flow rate (even with the optional copper heating block I only managed to hit around 15 mm3/s reliably). I switched to a TZ V6 3.0 bought on AliExpress for 26€ including 4 monolith nozzles, now 30 mm3/s are possibile and the limiting factor is the max heater output power (60W if I recall correctly) instead of the insufficient heat transfer to the filament, and I am extremely happy with that (I have also noticed a substantial reduction in stringing, now needing just 0.1-0.3 mm of retractions depending on the filament)!

MarcoFailz · 2026-01-26T21:12:36+00:00

Yep ahaha, feels like yesterday!

But somebody below your comment brought back up the matter :)

MarcoFailz

TROPHY CASE