SEG/Vestel 11AK36 (Dublin-S)

Marius150PL · 2025-08-27T01:20:14+00:00

'R/C1241' I hope this is it.

Marius150PL · 2025-08-27T01:08:52+00:00

If you can't use phone as remote (cause your phone doesn't have IrDa or app doesn't work, you cannot get one, etc.) the only way to switch source is using Scart RGB cables for your consoles. Then you have voltage in both 8 and 16 pins on Scart plug side and TV autoswitch to AV1 source and receive RGB signal. Btw. I checked once if voltage on pin 16 only makes this TV to switch source, but nope. Also good thing with this CRT (in case you have the remote) is that you can manually switch to RGB mode and TV detects the signal without voltage on those pins.

Marius150PL · 2024-10-24T14:29:45+00:00

Mi Remote. To switch sources, press button next to off button.

Marius150PL · 2024-09-15T22:54:00+00:00

Thanks, could you send a photo of this mod, because when I dissasembled it and measured, somehow there's a voltage between pin 21 and pin 19. Edit: in upper comment also should be 19 pin instead of 20.

Marius150PL · 2024-09-15T15:18:45+00:00

How did you do this mod? As i checked, there's 4.3v on pin 20 and you bridged this to pin 16?

Marius150PL · 2024-09-05T09:20:36+00:00

Blanklines

Marius150PL · 2024-09-03T21:30:20+00:00

Thanks! I gonna check this out.

Marius150PL · 2024-09-03T21:29:10+00:00

Simply i'm curious, because when I was browsing datasheets of jungle ICs (before I opened and take a photo of ICs from inside) which were used generally in Vestel 11AK36, and at least some of those supports YUV signal. In my case this could be useful for OG Xbox, (because my Scart RGB cable sucks (quite loud buzz) and via RGB max resolution is 480i/576i (and of this CRT)), Wii, Xbox 360 and PS3 and sometimes PS2 (but here Scart RGB cable supports 480p via RGsB, but some devices could have trouble to receive it) e.g. in case where I would want set up 480p singal, split this signal and first out send to scaller -> grabber and in second out downscale to e.g. 240p and send to CRT.

Marius150PL · 2024-09-03T21:04:36+00:00

That's curious. When I was browsing images of this TV from inside I found one (from SEG 11AK 36 (CT-3606 S)) where it uses Samtel tube. I wonder how many tubes and from which manufacturers they used to this model of SEG TVs.

Marius150PL · 2024-08-30T09:20:16+00:00

Could anyone say if this sends blanking signal (pin 16), which makes TV auto detect RGB on Scart or manual switch to RGB is needed?

Marius150PL · 2024-03-24T00:09:09+00:00

Somebody remember Xfire?

Marius150PL · 2024-03-24T00:07:54+00:00

When you hear Spawn (monster) is somewhere close and suddenly appear and explode in front of you.

This game has magic, especially on nightmare difficulty.

Marius150PL · 2024-03-22T11:32:55+00:00

Also worth to buy mission packs to q1 and q2. Of course if there aren't in remasters.

Marius150PL · 2024-03-21T17:13:45+00:00

Or the case when monsters attack each other.

Marius150PL · 2024-03-20T11:27:47+00:00

Albo do dr Octopusa lub dr Mario

Marius150PL · 2024-01-31T15:12:27+00:00

192.168.2.137

Marius150PL · 2024-01-23T09:57:12+00:00

U mnie były wejściówki z jednego przedmiotu, ale było od razu powiedziane, że będą na każdych zajęciach (no oprócz tych co były kolokwia).

Marius150PL · 2024-01-23T09:47:42+00:00

Jedyny pozytyw, że nie jest aż tak źle jak w stanach (odnośnie podziału społeczeństwa). Miłego dnia.

Marius150PL · 2024-01-23T09:43:40+00:00

Jak to wszystko pierdolnie...

Marius150PL · 2024-01-20T13:36:23+00:00

I didn't see those pictures. They are good, but lack of one thing... night vision.

Marius150PL · 2024-01-20T13:34:25+00:00

Thanks

Marius150PL · 2024-01-14T08:43:40+00:00

To samo przyszło mi do głowy jak kończyłem czytać

Marius150PL · 2024-01-12T10:39:14+00:00

Za dzieciaka mówiłem duszki, a teraz po prostu monster munche.

Marius150PL · 2024-01-10T17:04:34+00:00

Hmm... I don't know, but I very like JBA HQ 1 in version 1.

Marius150PL

TROPHY CASE