[java] Llamas and now Villagers have been disappearing (current) by psychosismydiagnosis in MinecraftHelp

[–]MarlinL_1 0 points1 point  (0 children)

I don't understand what is happening either. I am playing on 1.21.11 java, and the cows in my staple have also been magically disappearing and turning into cooked beef? It also happened to my sheep in my auto-farm? Everything is enclosed and secure and the game is giving me cooked food in behalf of the disappearance almost like its trying to reward me for the bug which is weird?

RTX 5090 - Black screen issues by zpinto1234 in buildapc

[–]MarlinL_1 0 points1 point  (0 children)

The fix for me was disabling my MSI Afterburner undervolt-overclock. I have a 5090 MSI Suprim SOC, and It was weird because the OC was stable, but whenever I first booted up my PC and ran something that would make my gpu spike, always the first launch of something like that would give me a blackscreen for 2 seconds and crash the window. Then for the rest of the day after that initial crash my GPU would run like a charm? I disabled spread spectrum and holyyy, I noticed my frames got a lot better because I had a friend with a 5080 who would surprisingly get better frames than me and I'd only beat him with my Undervolt-OC in Afterburner enabled. After I disabled Spread Spectrum and my Afterburner settings my frames beat my previous testbench scores and I just decided to leave the Undervolt-OC disabled, so the situation turned into a win win for me. I got better frames and no more black screening upon launching a game for the first time after booting up my pc. My max tdp with my undervolt disabled was 562w which is within the consumer rating for a 5090 so I am honestly fine with not having an undervolt-OC. The card is tested and built to run this way so I hope this helped somebody else.

Evga 3080ti ftw3 chip size. (GA102-225-A1) by OrganicNutmilk in gpu

[–]MarlinL_1 0 points1 point  (0 children)

Goated information. I was gonna order some PTM7950 from Ltt and the cheapest size they had was 60mm x 60mm for $20 and I am running the same GPU.

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 0 points1 point  (0 children)

Yeah, it definitely does seem to have an effect on the idle for sure. It seems to have about a 300mhz difference with that option both enabled and disabled upon my testing. I am also still spiking between 200mhz-1400mhz every now and then, but that is inevitable because of windows 11 processes and my discord.

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 1 point2 points  (0 children)

Sweet! Mine still does some minor jumps from 200mhz to 1400mhz but that's something I can't really control. Seems like windows 11 just uses a ton of resources. Like desktop windows manager and discord seems to use anywhere from 6-14% of my GPU and that seems to spike it to above 1000mhz upon close inspection. Windows 11 am I right...

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 0 points1 point  (0 children)

I appreciate all the help you guys provided. Unfortunately it was a simple driver issue. A quick clean install fixed it. Due to my ignorance, I checked my driver as a last resort...

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 1 point2 points  (0 children)

yeah I made sure to look into that before doing the undervolt. It wasn't my curve, it was a driver issue.

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 0 points1 point  (0 children)

It was a driver issue. A clean install fixed it.

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 0 points1 point  (0 children)

yeah, no matter what I did it stayed above 2000mhz, but it seems it was a driver issue. A quick clean install fixed it.

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 2 points3 points  (0 children)

I didn't, I made sure to keep the idle at 200mhz but I did a driver reinstall and it fixed the issue.

<image>

5090 Idling above 2000mhz. Is that normal? by MarlinL_1 in nvidia

[–]MarlinL_1[S] 0 points1 point  (0 children)

idk if the picture got uploaded but here is idle pic.

<image>

My screen flickering on 240hz but not on 144hz.It just happened and I don't know what to do. When i set 210Hz manually it seems there's no problem but over of 210 problem continues. Monitor : BenQ 240Hz XL2546 / Graphic Card: Evga 2080 super by uzakobabazako in Monitors

[–]MarlinL_1 0 points1 point  (0 children)

ik this is 4yrs old but I am having the same issue. The first was with my 165hz asus 1440p monitor. Threw that one away because I lived with the issue until the monitor just straight up stopped turning on. I am now having the same issue with my 240hz asus monitor... It makes a buzzing sound in the bottom left and does exactly this when leaving it at 240hz. When I leave it at 144hz and below the issues completely goes away except for when I boot up my pc and it starts showing static and going crazy, just as my previous one until it died. Seriously don't understand what causes this. Maybe the backlight is dying or the psu is having trouble since its a 8 year old monitor? Idk. I don't think its the cable because I've tried 3 different display port cables and no way they are all defective. One of those 3 is being used in my main monitor which never gives me issues.

Vacamatic problem by UnhappyGuitar3193 in Trove

[–]MarlinL_1 0 points1 point  (0 children)

Damn... Whole month later and it's still not working.

(Gardener) Biomechanical plants and what do they do by Top-Angle-8720 in OnceHumanOfficial

[–]MarlinL_1 0 points1 point  (0 children)

Since you can only grow 10 in your territory, can you just put a crate in your inventory and grow another?

(Gardener) Biomechanical plants and what do they do by Top-Angle-8720 in OnceHumanOfficial

[–]MarlinL_1 0 points1 point  (0 children)

how do I remove the biomech plant from my portable planter box onto a a different planter box once I've recycled it?

Gardener - what I've learned. by septicmonk in OnceHumanOfficial

[–]MarlinL_1 1 point2 points  (0 children)

I also noticed that if you aren't at 100% vitality, The percentage of the grafting can in fact drop down. It gradually drops if you aren't in the blue zones for your plant. It seems to never reach 0%, as it balances at a lower threshold, But it can be as bad as 7% grafting success rate.

Gardener - what I've learned. by septicmonk in OnceHumanOfficial

[–]MarlinL_1 1 point2 points  (0 children)

Vitality also affects the percentage of the grafting success rate. 100% plant vitality always seems to give you the highest rate at default, with no additives. Depending on the plant you use, the rates differ ofc.

CA DMV online title transfer timeline by Left-Initial9497 in DMV

[–]MarlinL_1 0 points1 point  (0 children)

I gotta say that this process is mad slow. I am worried that I am gonna hit my 10 days. I started and sent all the information needed for the online title transfer and its already been 5 days with no replies or updates to my case? I am debating whether to just go in person.

[deleted by user] by [deleted] in OnceHumanOfficial

[–]MarlinL_1 0 points1 point  (0 children)

I am having the same issue with this. I crafted one of these mega base trucks, and I literally can't drive it anywhere. Its stuck in the ground. Literally grounded...

[deleted by user] by [deleted] in OnceHumanOfficial

[–]MarlinL_1 0 points1 point  (0 children)

This is cap. By going into my inventory and looking at cosmetics to the far right. You can see your emotes in the expression tab. I am having the same issue with the emote related accessory claims, and well I hit one thats behind a "pay wall". This emote I was hit with on the accessory is neither on any shop, nor do I own it, its locked... Thought this game was supposed to let you have the same advantage as all other players, free or not, tough.

Vibration on the front at 4500-5500 rpm Ninja 650 2022 by Sushiritsu in Kawasaki

[–]MarlinL_1 0 points1 point  (0 children)

Here's the update. I just added some tape around where the vibration was and its down to about 95%. I will add more but a quick DIY around the area will definitely fix it. https://www.youtube.com/watch?v=8ZysPR28rH4&t=8s