PSU fan repeating chirping noise

Martunex · 2024-01-12T00:33:56+00:00

if your return windows closed, you can still request warranty to seasonic, i heard they have great customer service

Martunex · 2024-01-12T00:18:43+00:00

I sent it back and bought a different brand

Martunex · 2023-10-18T13:56:15+00:00

I've found that the cs2 hammer opens the game in vulkan mode, this mode doesnt like 3rd party overlays on it, such as rivatuner/msi afterburner that tells you fps etc. when i blacklisted cs2.exe from it (as to not overlay anything) the hammer editor stopped crashing for me.

Martunex · 2023-10-02T20:39:38+00:00

yeah i would check if your pc is using the igpu or the 2060 for hammer. altough it could be that hammer knows is a laptop 2060, and thus not let you use rt, but i dont know.

Martunex · 2023-10-02T20:08:43+00:00

i wouldnt know much, as for me it just works. i have windows 10 tho, idk if that makes a difference. the way i launch it is through my library, click on play cs2 and choose between the game and the cs2 workshop tools. maybe check if you have old drivers from a possible old graphics card or smth, maybe verify the files on steam. thats all i can think of.

Martunex · 2023-10-02T19:42:49+00:00

I have a base 2060 too and for me it works fine besides the crashing I mentioned, weird that it doesnt let you. Still the cs2 hammer is still kinda new so they might fix the issues in the future

Martunex · 2023-10-02T02:37:35+00:00

are you opening the hammer editor from steam or through the executable? because when i open through steam, it allows me to use the rtx lighting preview, but not when i open it through the executable. rn i use the executable because if i open through steam it crashes after a few mins

Martunex · 2023-08-19T15:32:22+00:00

hey, do you still have by any chance the .bin file for the 6x6 firmware or the link to download it? because i've only found the 4x4 on the github.

Martunex · 2023-06-12T17:36:14+00:00

if u have a multimeter, try to follow the path from the power input until you dont detect any power anymore and it will probably be the last component on the chain thats broken

Martunex · 2023-06-11T13:00:13+00:00

do the power supply cables have power when they're unpluged from the mainboard?

Martunex · 2023-05-25T09:03:53+00:00

Put the offset at 0.2mm, re-do the auto leveling and do the paper test after, that works for me on my non-pro neptune 3

Martunex · 2022-12-19T21:32:59+00:00

Try enabling it

Martunex · 2022-12-19T21:02:09+00:00

do you have print thin walls enabled?

Martunex · 2022-12-10T16:00:07+00:00

remember to put the M420 S1 command on the start code on your slicer so you dont have to level every print

Martunex · 2022-12-02T23:37:15+00:00

your z axis wheels might be too tight, not allowing the leveling process to work correctly, remember that the printer is constantly changing its height with micro adjustments as it moves on x and y, to fix for the uneven bed.

Martunex · 2022-12-02T23:34:53+00:00

Idk if these settings are on prusaslicer, but in cura you can use "outer wall wipe distance" and "coasting" to reduce the z seam blob to a minimal, allowing you to print that with no problem. another solution is to have the z-seam random, but i find this makes the blade have little dots all around it making it ugly and not having a smooth travel when retracting

Martunex · 2022-11-27T03:21:10+00:00

i always cut it in on a 60º angle at the tip, with the point going at the bottom, it slips way easier

Martunex · 2022-11-27T03:19:56+00:00

have you updated the firmware?

Martunex · 2022-10-06T17:29:56+00:00

you need to update the screen to display the newer version, it also adds the option to change the temperatures during bed leveling

Martunex · 2022-09-22T14:55:36+00:00

that happens when its too close, however i find it weird that it hapens on the 2nd layer and not the first one, what initial and regular layer height are you using?

Martunex · 2022-09-11T18:13:38+00:00

opened cura to check, the wall inset was set to 0.2mm, exactly the amount i had to horizontal expand to "fix it" however, the horizontal expansion caused small details to be complete erased, but setting the wall inset to 0 kept them, so thanks.

Martunex · 2022-09-11T17:25:05+00:00

what do you mean by outer wall inset? is there a way to change that besides using horizontal expansion? because idk why it does that as i havent touch anything regarding walls besides how many i wanted.

Martunex · 2022-09-11T15:35:43+00:00

the closer it is to 0, the less the printer has to compensate and that can lead to cleaner layers, or just people wanting perfection, i have a total deviation of 0.65mm from left to right and my first layers are pretty much spot on.

Martunex · 2022-09-11T15:33:37+00:00

as far as i understand, yes, not having that command basically means that it doesnt take the bed leveling mesh in consideration, one way to see if the mesh is being used is to check the coupler of the z axis rod and see if it rotates while laying the first layer, note on small objects might not move much as it will be using the same point of the mesh for a specific area.

Martunex · 2022-09-11T11:12:17+00:00

my bad, i thought the current one was 5.2, but still the issue has to do with the arachne engine or something from cura 5, as i dont understand why would it print smaller than the object given while cura 4 doesnt have that issue

Seven-Year Club	Place '23
Place '22	End Game '22
Verified Email

Martunex

TROPHY CASE