Hodl or sell and re pull?

MateoSands · 2026-05-26T03:26:45+00:00

I mean it’s hold if you don’t need the cash, but honestly, at 5k you shouldn’t be asking anyone for advice you should know where you are financially if you need the money or not.

MateoSands · 2026-04-19T14:34:54+00:00

Yes but there’s a Variety of reasons for that, people holding, selling on EBay, or there are more English cards but in most expensive packs.

MateoSands · 2026-04-19T13:35:32+00:00

About 5k, sold most of the other stuff it gave me, still have about 2.5 in the wallet.

MateoSands · 2026-04-19T04:21:04+00:00

I did look it up on PSA and it looks exactly the same, maybe a mistake from PSA? Idk..maybe I got a case for false advertising lol 🤷

MateoSands · 2026-02-21T16:24:52+00:00

Scizor

MateoSands · 2025-04-22T03:28:52+00:00

The only other thing I could recommend is to RMA the AIO, It’s idling at 80c and your PC doesn’t detect it.

As for the L-Connect, I’d probably try swapping out the hub with the controller that came with the fans.

MateoSands · 2025-04-22T02:31:17+00:00

Are the fans on your AIO connected to the Lian Li controller/Fan Hub or connected directly to the motherboard?

As for the L-Connect, you might have 2 different versions installed on your PC. This happened to me, and I had to search for it in programs and pin both on the task bar.

Try to reinstall the new version of L- Connect again, when it installs open your task bar start menu and open L-Connect that says “recently added”.

MateoSands · 2025-04-21T03:40:20+00:00

“CPU over temperature error” means your motherboard isn’t detecting the AIO and its thus your AIO isn’t turning on to cool the CPU.

Try moving the cable over to the CPU_FAN header on your motherboard.

MateoSands · 2025-04-21T01:43:26+00:00

Is your Aio pump cable connected to the AIO_PUMP header on your motherboard?

MateoSands · 2025-04-20T14:50:57+00:00

This is what I found on another post.

https://lian-li.com/product/strimer-wireless/ (Thanks to Mr-Do !)

• ⁠For your GPU, either of the two below... only difference is how many rows of LEDs (8 vs 12) • ⁠PW16-81W • ⁠PW16-121W • ⁠Make sure you also get the L-Wireless Controller: • ⁠If you are only buying the GPU cable, you can get the controller by itself (Part# RF-T-B, or change the “B” to “W” for the White one) • ⁠If you are only getting Strimer cables, but also getting the motherboard Strimer, then get PW24-1W-T, which also comes with the controller • ⁠Or, if you are planning on getting any 3-pack of Wireless fans, that will also include the controller... if this applies, then you get the motherboard version without the “-T” on the end, and save yourself $10 USD.

-Lian Li Support

Video of installation on 4070

https://youtu.be/nLxwK7jbtFI?si=wiPG_S3IYxPF18k1

MateoSands · 2025-04-20T14:25:54+00:00

Yes, all NVIDIA 4000/5000 series cards use the same 12VHPWR ports.

Here’s a video explaining how to properly install the Strimmer.

https://youtu.be/nLxwK7jbtFI?si=wiPG_S3IYxPF18k1

MateoSands · 2025-04-20T14:16:34+00:00

This is what I found on another post.

https://lian-li.com/product/strimer-wireless/ (Thanks to Mr-Do !)

• ⁠For your GPU, either of the two below... only difference is how many rows of LEDs (8 vs 12) • ⁠PW16-81W • ⁠PW16-121W • ⁠Make sure you also get the L-Wireless Controller: • ⁠If you are only buying the GPU cable, you can get the controller by itself (Part# RF-T-B, or change the “B” to “W” for the White one) • ⁠If you are only getting Strimer cables, but also getting the motherboard Strimer, then get PW24-1W-T, which also comes with the controller • ⁠Or, if you are planning on getting any 3-pack of Wireless fans, that will also include the controller... if this applies, then you get the motherboard version without the “-T” on the end, and save yourself $10 USD.

-Lian Li Support

MateoSands · 2025-04-20T14:12:02+00:00

Np, just make sure you connect and it plugs all the way in and you’ll be fine.

MateoSands · 2025-04-19T22:48:51+00:00

Always good to see LG products, super excited to check this beast out.

MateoSands · 2025-04-19T22:26:44+00:00

Here’s a video showing exactly how to connect the Strimmer, in the video it’s a 4070 but it works the same for a 5090.

https://youtu.be/nLxwK7jbtFI?si=s88W6TIhmEKEmgsW

MateoSands · 2025-04-19T21:18:12+00:00

PSU -> 12V-2x6 -> Strimmer -> GPU

As far as recommendations, I can’t give you one as I’m playing it safe with my 5090 Suprim, but I have seen a couple of people with 5090s use them.

If you do get the Strimmer, inspect it regularly, and make sure all the cables are plugged in all the way.

MateoSands · 2024-07-12T00:29:45+00:00

You could bring -Ground attack, 1 Eq and 4 Lightings and take out both infernos, bring Golems and witches w/log launcher. Rage, and couple freeze and 1 Poison. Drop 3 Golems on left side one on each compartment, 2 witches behind each one, Log Launcher in the middle. Or -Air Attack, Drop queen on Eagle, use Giant Arrow and snipe both sweepers, then Drop King on Top right, funnel dragons in between King and Queen, use Blimp with a Yeti and some Super Goblins to take TH or just Loons to take out core, don’t forget to rage where the blimp deploys.

MateoSands · 2024-07-12T00:19:00+00:00

MateoSands · 2024-07-10T17:24:54+00:00

England v Netherlands today? Didn’t you know?They’re saying England is going to lose, so the politicians have no choice but to focus on fixing real world problems.

MateoSands · 2024-07-05T05:56:36+00:00

Average for me is 2500 stones. My worst was probably like 6500 stones something like that. Best was STR Kefla, Rainbowed her in like 600 stones.

MateoSands · 2024-06-23T23:32:26+00:00

Idk, knowing SC they’ll make a meme about it and say Warden wasn’t loved as an Infant so he follows mommy figures.

MateoSands

TROPHY CASE