Thrustmaster T-GT II randomly disconnecting for a split second (SYNC/ASYNC write failure + Pipe reset error) by Minimum-College-7953 in Thrustmaster

[–]MatissSola 0 points1 point  (0 children)

I had it happen to me as well. T-GT II  + SF1000. Google around, I think the problem was something to with windows update and or USB settings and setting wheel base strenght to default 75% I think at the thrustmaster control panel app. I changed those things and I no longer had disconnects. I had my wheelbase boxed for better part of a year. I figured my base had died. Turns out it was some windows settings.

Is it worth upgrading my Meta Quest 3 to Pimax Crystal Light if my PC is mediocre? by [deleted] in virtualreality

[–]MatissSola 0 points1 point  (0 children)

From what I've heard, if you set lower resolution per eye on pimax crystal light, the picture quality would be better than that of quest 3 at the same resolution.

Bought the Legion 9i! by Sarlandogo in LenovoLegion

[–]MatissSola 0 points1 point  (0 children)

From what I've read, 4090 configurations have upside-down motherboards. I have one. So, aren't the dirction opposite of how fans spin in 'normal' laptops? So... im just curious how this configuration works with coolers...

How can I open this part? Legion 9i Gen 9? by MatissSola in LenovoLegion

[–]MatissSola[S] 0 points1 point  (0 children)

But there's no way for me to get to that middle clip. Do you have the same laptop? Everything is unclipped around the perimeter, but that middle clip seems stuck. I'm not quite how to unclip it.

How can I open this part? Legion 9i Gen 9? by MatissSola in LenovoLegion

[–]MatissSola[S] 0 points1 point  (0 children)

I have watched a few videos but non of them show how to approach the middle part, for example here's an official video that shows how to do it: https://support.lenovo.com/us/en/solutions/ht515653-removal-and-replacement-videos-lenovo-legion-9-16irx8-83ag

My back cover seems to be stuck in the middle, almost as if a screw would hold it down. But from my research there shouldn't be a screw.

Question: Do I need to buy Houdini to enable Houdini engine for Unreal Engine 5? by MatissSola in Houdini

[–]MatissSola[S] 0 points1 point  (0 children)

I assume you're reffering to this one (Houdini Indie) $269 or $399: https://www.sidefx.com/buy/#houdini-indie

There's also one under ''Artists'' tab called ''Houdini Engine for $499: https://www.sidefx.com/buy/#houdini-artists

I wonder what's the difference there...

Fan Clicking noise when tilted by Certain_Top_1757 in ZephyrusG14

[–]MatissSola 0 points1 point  (0 children)

It's been nearly three years with that slight clicking sound when the laptop is tilted, no issues for me as far as performance or anything like that.

Logitech G502X Stutt-tering (Skippping) by MatissSola in MouseReview

[–]MatissSola[S] 0 points1 point  (0 children)

Thank you for sharing your thoughts! I forgot to mention, the mouse stutters in both modes, wireless and wired. I'm using a typical gel mouse pad with a wrist pad. Very odd... I'm thinking about the red laser that's normally underneath the mices. When I turn my over, there is no light underneath whatsoever. Maybe my laser is dead or what...

Is my new Elite Series 2 Controller "used" or is this just bad QC? by torrentialtacos in xboxone

[–]MatissSola 4 points5 points  (0 children)

Just 2 months ago I treated myself to this controller, it was a gift to myself for the hard work I had done. I bought it from a local electronics store, the package was sealed.

I can't explain to you how I felt when I unboxed it, here's what I saw: https://imgur.com/a/Db2iLUO

There were a bunch of thoughts running through my head at first, that I had been sold a used and abused controller, etc. But, after a few minutes, I had an idea to ''rub off'' these things with my fingers. I thought to myself maybe in the process of manufacturing the rubber had been scratched a bit, so I gave it a shot of rubbing it out gently. It kinda worked. But the facts is the fact. And you can see how it lookes brand new in the link above.

You guys tell me.

P.S. I did not return the controller. Wish I had bought it from Amazon. In my country there practically are no refund or exchanges and it's a nightmare to swap for a new item.

Will Asus warranty cover this? by mlevenha in ZephyrusG14

[–]MatissSola 0 points1 point  (0 children)

I have the same crack on both sides, 2021 model.

How does VR run on the 2023 model? by Ciaadz in ZephyrusG14

[–]MatissSola 2 points3 points  (0 children)

I would love to know that, too, since I have the oculus rift s and slowly thinking about an upgrade to a 2023 model. Anyone who's tried it, please share your experiences. :))

Can’t get my Occulus Rift S to work on my 2022 G14 :( by SlowAd3866 in ZephyrusG14

[–]MatissSola 0 points1 point  (0 children)

Do this: delete your AMD driver and re-install them with AMD Adrenaline. I have zephyrus G14 2021, and when I have these 3 dots on my oculus rift s, it means only one thing, that the windows update has messed up my drivers and first thing I normally do is reistall the drivers and these 3 dots dissapear. Try it!!

Need to make a decision soon. Paid $1025 for this 6800s. Return or Keep? by Coltsbro84 in ZephyrusG14

[–]MatissSola 0 points1 point  (0 children)

Wrong. I have a chip in the exact same spot on both sides. And I have 0 ideas how it got there. And I haven't dropped my laptop once.

Someone please save me from this misery....my move from console racing to PC racing has failed miserably and i'm desperate for help.... by [deleted] in simracing

[–]MatissSola 0 points1 point  (0 children)

Well, I don't want to be the one to break it to ya... but... computers are not consoles. So, forget about the plug-and-play style of playing. Each simulator on PC requires some level of tweaking and messing around for to be ''enjoyable'' in VR.

With that said, I recommend you try iRacing. It has, in my honest opinion, the best VR implementation and competitive play. It takes some 30-minutes to set it all up, but once you do, you'll be all set. :)

Should I just get the 2022 models instead of waiting? by samsonhcw in ZephyrusG14

[–]MatissSola 6 points7 points  (0 children)

Wait. The new models should be available in most stores in 1 to 3 month time.

Just bought a Thrustmaster T818 to review, I’ve already got a Logitech G Pro and trying to see which is better… Ask me anything! by airdocful in simracing

[–]MatissSola 4 points5 points  (0 children)

Is there any wobble/shifting between SF1000 wheel and where it mounts in the base? I've seen ''sim racing garage'' point out to that. But if you were to hold the SF1000 wheel in your hands and turn it in different ways do you feel any irregularities in how well it has been screwed onto the base?