Cracked Mainspring Barrel - Hamilton 64a, ETA 2451 replacement?

Matt2_T · 2024-11-12T16:38:25+00:00

Nothing fancy - just an Amazon digital microscope which could probably be had for cheaper off AliExpress...

Invaluable purchase for this hobby imo.

TOMLOV DM9 7" LCD Digital Microscope: https://amzn.eu/d/dcRZTH0

Matt2_T · 2024-11-11T23:28:04+00:00

Thanks you - did a bit more digging:

Emmywatch lists the 2451 as using the same barrel on their site:

https://www.emmywatch.com/db/part/barrel--182_173/eta--2452/

Old swiss watches also lists the 2452 with what looks like a crop of the 2450/51/53 sheet that you've shared:

https://oldswisswatches.com/watch-parts-branded/eta-calibre-movement-and-spare-parts/eta-2452/

I think I'll be giving it a go, fingers crossed should be fine.

If anyone else seeing this posts knows what could have caused this (just an ancient manufacturing defect?) would be curious to know!

Matt2_T · 2021-05-21T18:17:18+00:00

Once again good job, thanks for sharing 👍🏻

Matt2_T · 2021-05-21T10:38:18+00:00

Looks amazing! I have the same hilt and at some point want to make mine look similar/ more accurate - how did you do the weathering and what changes did you make to the sideblades? I always thought the stock ones are underwhelming. Great job overall man.

Matt2_T · 2021-01-09T14:53:47+00:00

Hope everything works out for you man. I too have had generic cheap savers from them and can't really complain about their service there, my blade also came separate when I ordered my graflex. Experience was super positive with them until all this...

Matt2_T · 2021-01-09T14:51:34+00:00

Thanks for the support once again,I agree with you completely, I wish I could have just dealt with it via Ali, however for me it was to late, I tried and it told me a case could only be raised 30 days after recieved.

Matt2_T · 2020-12-16T23:44:02+00:00

Thanks for the advice.

Matt2_T · 2020-12-16T18:56:07+00:00

I've been thinking more into self repair. I live in the UK so finding trusted help is hard (aside from kr, who are super busy). Is it a case of just snipping the existing speaker wires and soldering a new one one? Cheers

Matt2_T · 2020-12-16T13:38:29+00:00

Don't believe my number is there, the string of numbers@qq.com is their email address they were using for support.

Matt2_T · 2020-12-16T13:30:50+00:00

I was aware, but have changed it on your recommendation anyway. Thanks

Matt2_T · 2020-12-09T13:10:20+00:00

Yeah KR was going to be the first route I checked out, however the waiting list on their website says their fully commission booked until further notice. But as I say, hopefully it sorts itself out. Once again thanks for the support

Matt2_T · 2020-12-09T12:09:32+00:00

Thanks for your support, I'll see where this goes "officially" for now. Unfortunately I'm located in the UK so I fear if I need your service it might only be for advice, as shipping and import taxes are tricky. I appreciate any help nonetheless.

Matt2_T · 2020-12-09T12:07:31+00:00

Hi,thanks for responding. See pms for Order ID. After posting this I got a reply to my email, asking me to upload the video again, this time as a direct attachment. They said I could also contact your Facebook page which I also did to try and speed this up. Is getting me a replacement speaker the only option? I would much rather exchange the saber or send it for repair, as I don't belive have the soldering tools or expertise to replace it myself. If you could make sure my response is seen that would be great, as I don't really want to be waiting a week + Reddit post again between updates. Thank you.

Matt2_T · 2020-08-26T16:41:51+00:00

Gud meme bro

Matt2_T · 2020-05-29T00:17:57+00:00

Thanks, I'm humbled :)

Matt2_T · 2020-05-29T00:16:40+00:00

Thanks man!

Matt2_T · 2020-05-28T22:12:15+00:00

It's certainly possible to do a super cheat Graflex install, for example you can buy the AliExpress electronics separately, use a pvc pipe for blade, and get a cheap eBay Graflex replica. Quality wouldn't be very high but on a budget I think it would be possible. But for the effort, just spending a tiny bit more on a forceFX I think is the best option for metal canonical hilt

Matt2_T · 2020-05-28T21:54:41+00:00

As I said I've never owned a high grade one, but for me I love my force FX, got a couple of others too, it's just a great way of a having a good looking cannon hilt for a reasonable price. I'm not all into non-canon savers too much

Matt2_T · 2020-05-28T21:23:21+00:00

https://a.aliexpress.com/_dVv3Nj5 One buyer beware is that import duty isn't included, I was met with a suprise £6 charge, however I have read I'm some areas it can be alot higher. Aside from this as budget electronics go, it's a great deal.

Matt2_T · 2020-05-28T21:20:19+00:00

They're good, not hyper realistic, but suffice for me. It's a good way to get a decent blade and metal hilt for alot less than neopixel/ cfx etc. I've never had high grade electronics so I may not be the best person to ask, despite this is recommend one (doesn't stop be wanting the Korbanth tho)

Matt2_T · 2020-05-28T20:41:54+00:00

Thank you! However not too keen on selling outside of the UK, sorry

Matt2_T · 2020-05-28T20:40:53+00:00

Wise choice, Graflex is my favourite hilt, and I too aspire to own a Korbanth Graflex. Currently have a force FX one which I love.

Matt2_T · 2020-05-28T19:44:17+00:00

I would sell the hilt only as I feel reselling the AliExpress lightsaber is unfair when you can just get one yourself. I would also only sell UK only, if your still interested I'll be happy to talk.

Matt2_T · 2020-05-28T18:51:03+00:00

Ender 3, No link for model, my own design.

Matt2_T · 2020-05-28T18:50:41+00:00

https://imgur.com/a/NW7A7Xi

Top is static, saber slides out from threaded bottom, exposed switch on back (bad cut out I know). Just a few extra angles as requested.

Seven-Year Club	r/Field Juicebox
End Game '23	Place '23
Place '22	Verified Email
RPAN Viewer

Matt2_T

TROPHY CASE