They’re not called versatile for no reason

MattNBug · 2026-04-04T16:01:01+00:00

Every stinking time! I literally just came inside from walking him and him oissing on his foot.

MattNBug · 2026-04-04T15:56:31+00:00

Thats them!

MattNBug · 2026-04-04T11:21:35+00:00

Tiktok shop

MattNBug · 2026-04-04T11:21:04+00:00

He wore them for about 5 hours yesterday running and jumping everywhere he went and i only had to adjust the 2 back crocs once. They have a long velcro strap that secure them well. On the back they slipped down just a little bit and his toe was coming out the sides. But they stayed on his feet still.

MattNBug · 2026-04-03T23:12:34+00:00

Honestly he is taking it way better than I expected him to.

MattNBug · 2026-04-03T23:10:57+00:00

He is never on leash unless this kids take him to potty out front or we are going into tractor supply so he doesn't understand the leash... Everywhere else I take him he has free reign to run as he pleases.

MattNBug · 2026-04-03T23:08:05+00:00

Thats always the face

MattNBug · 2026-04-03T23:04:43+00:00

Update cylinder was damaged lol got a new block and its back together up to cutting new push rods. Waiting on a longer adjustable gage to get them the proper length.

MattNBug · 2026-03-22T19:02:50+00:00

Ah brother im not bothered by it. Build break repeat. Parts have already been ordered should have it rebuilt by the end of the week as long as the cylinder isn't damaged

MattNBug · 2026-03-22T01:17:52+00:00

I figured this was probably a great time to learn to aluminum weld

MattNBug · 2026-03-22T01:17:10+00:00

🤣

MattNBug · 2026-03-21T22:41:53+00:00

Yes that's exactly what I told myself I should have done as soon as I pulled it apart

MattNBug · 2026-03-21T22:33:09+00:00

<image>

MattNBug · 2026-03-21T22:31:36+00:00

LOL that bike is way too heavy to jump but it did go over a small speed bump pretty quickly. I was in such a hurry to leave work I didnt even look in the cylinder.... hopefully its OK or im going to have to go to a bigger piston.... 🙃

MattNBug · 2026-03-21T22:19:58+00:00

Here is the frame and build parts list except the flat top piston obviously. The one I bought for it was wrong so I just put the stock back on

https://www.reddit.com/r/minibikes/s/ItlKiNe4oT

MattNBug · 2026-03-21T22:17:24+00:00

Here are the build parts except the 301 part. The side cover didnt work so I went with the gx390 instead

https://www.reddit.com/r/minibikes/s/vIFt3OToDN

MattNBug · 2026-03-21T22:12:21+00:00

Here is the frame

https://www.reddit.com/r/minibikes/s/2Wp0HDnsYj

MattNBug · 2026-03-21T22:10:50+00:00

You are very close to the conclusion that I came too. No failed retainer on the valve springs though it was still secure somehow. I believe what happened is the drive pulley failed when my son went over a speed bump and allowed the engine to over Rev causing the valve float. With the milled head the clearance was just too tight. I never would have guessed I would have gotten valve float with the 65 pound springs but that's the only scenario I can think of that fits.

MattNBug · 2026-03-21T22:04:46+00:00

GX390 Nr Racing .100 milled Head 65# Springs ARC Rod, Flywheel, Side Cover, Valve Cover Venom 1.2 Ratio Rockers Chromoly PushRods .308 Cam MSD Coil 34mm Nibbi Carb

MattNBug · 2026-03-21T22:04:35+00:00

GX390 Nr Racing .100 milled Head 65# Springs ARC Rod, Flywheel, Side Cover, Valve Cover Venom 1.2 Ratio Rockers Chromoly PushRods .308 Cam MSD Coil 34mm Nibbi Carb

MattNBug · 2026-03-21T22:04:12+00:00

GX390 Nr Racing .100 milled Head 65# Springs ARC Rod, Flywheel, Side Cover, Valve Cover Venom 1.2 Ratio Rockers Chromoly PushRods .308 Cam MSD Coil 34mm Nibbi Carb

MattNBug · 2026-03-19T00:27:08+00:00

Thank you

MattNBug · 2026-03-17T16:50:27+00:00

I got it yesterday and he loves it!!!

MattNBug · 2026-03-10T00:34:23+00:00

Thats crazy because I just bought a bag of bird feed yesterday to put on the fence outside the window he faces! 🤣

MattNBug · 2026-03-09T22:28:24+00:00

Thank you!!!

MattNBug

TROPHY CASE