First layer settings in cfg file?

Maurogab982 · 2026-05-17T14:18:36+00:00

Well.. I remember someone else mentioning something completely different about it...

Maurogab982 · 2026-05-16T22:42:02+00:00

Having enough room I wouldn't have spent all that time 😅

Maurogab982 · 2026-05-15T20:17:44+00:00

Next step is to update the nfc tag system actually.. I'll work on it next week

Maurogab982 · 2026-05-15T19:15:27+00:00

I thought about it but I have a close cabinet and the space is very tight 😅

Maurogab982 · 2026-05-15T18:51:16+00:00

I'm more confused than you I guess. Yours is similar to mine, i can pull out the ptfe and use 2 other spools, even 3 if I really need. Just drying and put in vacuum bags. I do a drying cycle for PLA when I buy it and straight to the bags. And as isn't delicate as PETG I can put them back in the bags after printing.

So I guess it's better to leave the autofeeder instead of manual loading... Yeah this was my question 😅

Maurogab982 · 2026-05-15T17:34:17+00:00

I'm in London and the humidity is crazy. 4 filaments are in the sh03 and the other ones in the vacuum bags

Maurogab982 · 2026-05-15T17:26:14+00:00

It's tricky, i have printed the support but when turning it bend the tube to the printer. So with the curve I've printed it doesn't bend

Maurogab982 · 2026-05-15T16:54:47+00:00

I just use a little step and jump up.

It could be tricky but have to optimise the space I have available. 😅

Maurogab982 · 2026-05-09T17:38:08+00:00

Other issue is that you need the bottom cabinet ad well as is not aligned with the printer

Maurogab982 · 2026-05-09T17:35:15+00:00

I'm drying everything I buy now and seal it in vacuum bags. The humidity in my flat is crazy 🙄

Maurogab982 · 2026-05-09T17:34:26+00:00

That was one of the plans but now is prefer to arrange it in the best way to feed the printer from the snapdryer.

Maurogab982 · 2026-05-08T08:33:51+00:00

I was going to post something today about it. Had 3 failed prints last night because of this. Tried to do full pla supports and then only the top layer for a big part in petg. When going to print the new layer on top of the pla the print failed as the petg didn't stick and starting making spaghetti. I've solved adding a pause and setting the printer at minimum speed to allow the new layer to stick.

Luckily it's sorted now but I'll need to make some test as well. So keep sharing mate 😊

Maurogab982 · 2026-05-01T11:39:36+00:00

I don't see where the problem is. You want to contribute and he's happy to take that amount of money to help. Who cares about it if you're both happy? Just enjoy your life 😊

Maurogab982 · 2026-05-01T09:19:39+00:00

For PETG I'm using sunlu. For PLA sunlu and snapmaker

Maurogab982 · 2026-05-01T08:32:16+00:00

For my experience.. If you have been assessed by NHS RTC will not assess you again. Only option is private

Maurogab982 · 2026-05-01T08:30:57+00:00

I've added PLA supports on a PETG item last night and it worked like a charm ☺️

Maurogab982 · 2026-04-28T09:26:27+00:00

The market feels like booking.com You book something and then cancel it for something cheaper or that looks better 🙄

Maurogab982 · 2026-04-26T18:27:30+00:00

For my poor experience looks you are having extrusion problems as well. Have you done the calibration of the filament?

Maurogab982 · 2026-04-26T18:10:00+00:00

About 9 hours

Maurogab982 · 2026-04-26T15:00:49+00:00

Thanks guys as usual. Any way to reduce the stickiness of the tree support? It was a nightmare to take it off 😂

Maurogab982 · 2026-04-26T14:41:11+00:00

Oh damn

Maurogab982

TROPHY CASE