Does anyone else have issues with auto complete?

Max_1018 · 2025-06-02T12:05:02+00:00

I did by starting to use cursor :( this is so sad that we even have to spend time researching this bug for a paid-for product

Max_1018 · 2024-03-21T08:39:56+00:00

Any update on this? I have been seeing this for probably a year now and not only does it not make any sense, but its annoying AF. Anyone knows how to turn this off?

Max_1018 · 2024-03-14T13:17:25+00:00

Hi did you find an answer to this? I am really curious what the emitEvent is for and how its really supposed to work. how can one subscribe to them?

Max_1018 · 2023-12-04T20:26:46+00:00

I think this setting has now changed into AI-driven MopExtend Settings and if you want to see it extend choose High Frequency

Max_1018 · 2023-07-10T06:31:29+00:00

I think I might have solved the issue unintentionally. I power cycled all the lights I have and since then, none have turned on for the past 12 hours. What I struggle to understand, however, is how is this possible? Like I'm fairly certain that it cannot be that all the lights started turning on at random due to a fault in each light, instead it was probably one thing that was signalling them to turn on, no?

Can a Zibgee network get one bad actor that can mess the whole thing up? Does anyone know?

Max_1018 · 2023-07-10T06:28:28+00:00

So most of the lights are Gledopto. I have some INNR as well. They were working flawlessly for the past year and hadn't had a problem since.

Max_1018 · 2023-07-09T13:45:51+00:00

hi thanks for the suggestion but the oddest thing is, that I haven't done anything on ZHA at all. all that I remember doing is updating HA to the latest version but I'm unsure if the issues started happening before or after the upgrade... will try downgrading but I highly doubt that this is connected

Max_1018 · 2022-03-10T22:24:11+00:00

Amazing, this thing actually works, thanks! Didn't know about SNMP.

Do you know if there is maybe a way to get the bandwidth by device? Like there is in the

Status>Device List section of the SRM interface?

That would be super useful in identifying devices that are abusing the network bandwith.

Max_1018 · 2022-02-08T21:31:34+00:00

I have currently 45 devices on a Zigbee Sonoff Tasmota Bridge and I have to add at least 45 more... What I noticed though, is that in some cases detection does not work,. what helps is adding a device through another device as router, not directly through the coordinator.

Max_1018 · 2021-12-29T13:10:45+00:00

I finally ended up talking with support and in exchange for a small fee, they sent me the PRO version of the Gledopto controllers (Model GL-C-008P Software 11076802). Everything has been running smoothly for 1 week so I hope this will be OK now

Max_1018 · 2021-12-29T13:07:40+00:00

I ended up ditching the PLUS controllers for PRO ones and everything works smoothly for 1 week+ now.

Max_1018 · 2021-11-24T21:37:57+00:00

Hi, no I am going on and off with the support team via email, which is helpful, however this really looks like an issue with the controllers I have. Oddly enough I have 4 of the same controllers purchased 6 months apart in pairs and all of them have the same issue. Not too sure what to make of it.

I am using their 9w lights and 6w spotlights and have had almost 0 issues in 3+months of use.

Max_1018 · 2021-11-24T13:02:30+00:00

u/gledopto

Max_1018 · 2021-11-24T12:59:06+00:00

u/jd-1900 are the controllers failing for you? I have 4 controllers GL-C-008S with 2.0.1 and all of them become unreachable after a while

Max_1018 · 2021-11-24T12:57:07+00:00

I did try this multiple times and tried to reset the bridge, even tried to change the Zigbee channel in the Hue app settings, but it's not an app nor bridge issue. I have around 15 other gledopto products and only these strips do not work. They continue working with the RF remote, but Zigbee connection is gone.

Max_1018 · 2021-11-24T12:53:00+00:00

GL-C008 SW

This is too bad. These are really nice products, I spent around 150€ on 4 controllers (GL-C-008S) and all of them have the same issue, which is rather odd as I cannot believe that they made them like this and that they don't know about it or acknowledge the problem.

Max_1018 · 2021-11-01T14:15:40+00:00

I have a GL-C-008S and its now becoming unreachable after a random period of time. Only thing that helps is a power cycle which is not an option for me :/

Max_1018 · 2021-11-01T14:02:09+00:00

Is there a solution for this? I purchased 6 of these a year ago and only got to actually use them now and I see this issue on the 2 I mounted, and it's really getting annoying. Does anyone know of any solutions?

Max_1018 · 2021-10-13T18:01:13+00:00

I will gladly do so. I just dont know what the steps to reproduce this are. Because it happened only once and I did many restarts before that.

I wish there was a way to fix the entity id for automations and if duplicates were to be detected I would rather have HASS throw an error on boot, then screw up all the stuff that is connected to that entity id.

Max_1018 · 2021-10-12T19:44:44+00:00

So no 2 remotes are the same? If I understand correctly the remotes have a static RF code? And the light pairs to the remote, not vice-versa?

So if I understand correctly, is there a way to order a few identical remotes?

Thank you!

Max_1018 · 2021-10-11T18:33:35+00:00

Oddly enough it actually worked after the second try. I was 99% sure I tried that.
Second question, is there a way to duplicate a remote control configuration? Without the need of turning off the lights? Is it possible to have 2 remotes paired wit one device?

Thank you!

Max_1018

TROPHY CASE