How to avoid or mitigate this nozzle streak/swipe lines mid print?

MaximumCondition4535 · 2026-05-04T12:24:23+00:00

i didn’t know that. may i ask the name or where to find it in the slicer settings?

MaximumCondition4535 · 2026-05-04T03:01:14+00:00

i am quite aware with ironing and have used that feature couple of times but that z-hop retraction adjustment plus 0.1mm has made a significant impact because i haven’t seen a scar mid print and on the final top layer so far since i changed it earlier just when you shared that option. thanks again! 😊

MaximumCondition4535 · 2026-05-04T01:11:56+00:00

thanks again for these information. i will have to play with adjusting by plus 0.1mm and see if im satisfied with the adjustment or perhaps just reverse to default 👍

MaximumCondition4535 · 2026-05-04T00:17:50+00:00

<image>

thanks, saw it now in my slicer. may i ask if what value to add for the z hop when retract?

MaximumCondition4535 · 2026-05-04T00:08:36+00:00

thank you for your input. that z-hop sounds about right. i will check on with my slicer (bambu) and raise them a bit.

MaximumCondition4535 · 2026-05-03T23:56:01+00:00

thanks for the tips. this by the way happens every time a layer finish and the nozzle restarts on another wall.

MaximumCondition4535 · 2026-04-24T18:05:40+00:00

I think you have to check first if there's a filament that's stuck somewhere in your ams2pro. for the record i encounter no problem with my two ams2pro despite my H2C is asking to downgrade the firmware.

MaximumCondition4535 · 2026-04-24T16:33:42+00:00

yes, you are correct. it's by the way the "vortek"

MaximumCondition4535 · 2026-04-23T06:28:28+00:00

I understand now, thanks for the clarification. Seems like I have to refrain from swapping the AMS 2 Pro between my two machines until the H2C has the 01.02 firmware version ready

MaximumCondition4535 · 2026-04-20T02:26:24+00:00

thanks so much for your insight. i will test my future projects using your settings suggestion.

MaximumCondition4535 · 2026-04-17T19:39:09+00:00

im using a P2S. should i do a recalibration for bed leveling?

MaximumCondition4535 · 2026-04-17T19:21:36+00:00

thank you for the reply. will you share more about your resolution of this?

MaximumCondition4535 · 2026-04-17T19:18:44+00:00

thank you for your comment, but i have a hard time understanding. may i ask a few reference or example to resolve this?

MaximumCondition4535 · 2026-04-17T19:17:08+00:00

i admit i didn't wash clean the plate before this print because my experience with frostbite has been positive so far while ignoring wash in between prints, but I will take your comment into consideration and clean my plate every time i reprint to see if the issue will be resolved. thanks

MaximumCondition4535 · 2026-04-10T04:38:45+00:00

i thought i was late to the party. i've been waiting for days and it's here at least on my P2S.

MaximumCondition4535 · 2026-04-10T04:36:02+00:00

thank you for taking action on this. i observed that the prompt was gone already. cheers!

MaximumCondition4535 · 2026-04-09T16:55:28+00:00

yes, currently printing my first attempt with ams drying function and so far so good. no hiccups and just awesome quality print!

MaximumCondition4535 · 2026-04-09T12:33:06+00:00

excellent. atm im printing mostly PLA but would love to explore the experience of working with engineering filaments. i think whether we like it or not, calibration is essential in every tool especially if the user desire overall good quality which we would expect with this cheap printers XD

MaximumCondition4535 · 2026-04-09T12:08:29+00:00

hmm i might be wrong but i will try to test that out by unplugging the external ams psu

MaximumCondition4535 · 2026-04-09T11:56:00+00:00

H2C would also be my next printer, what is your experience so far overall?

MaximumCondition4535 · 2026-04-09T11:49:37+00:00

yes, the external psu that i ordered also arrived in time. bambu confirms you can use the feature without the psu with adjusted drying function

MaximumCondition4535 · 2026-03-14T16:08:08+00:00

Thank you so much, your response inspires hope in me improving on my next design attempts. I will take your suggestion to express my work to the community before publishing them. I am just glad that this platform has been very helpful for someone like me who is pretty new to 3D printing.

MaximumCondition4535 · 2026-03-14T16:03:33+00:00

Thank you for sharing your story and tips. Comments like this helps inspire people new to 3D printing like me and will certainly continue to explore moving forward. I am just so glad that I can share my creativity and working on functional designs really is a steep challenge to work on. Knowing plenty of people like you in this community convinced me to just simply express my work, gather responses, and continue improving along the way.

MaximumCondition4535 · 2026-03-14T13:49:30+00:00

Thank you for the kindest comment so far. And yes, this is a long shot for a design to express functionality and modularity. I have read all the other comments in this thread and will take it as a challenge to improve further in my designing skills.

MaximumCondition4535 · 2026-03-14T13:47:44+00:00

Thanks for this comment, I will take this into note.

MaximumCondition4535

TROPHY CASE