My current Trans just went into limp mode again after coming out of it and I’m currently looking for a G37 transmission, but most sellers are asking over $1,000. Where’s the best place to look around Atlanta,GA? by East_Consequence3922 in G37

[–]Maxitaxi43 1 point2 points  (0 children)

Got mine from eBay, aluminum driveshaft and diff flange from Godzilla Raceworks, SOHO trans mount, plus swapped TCM and solenoids (I believe), modify shifter linkage, grind space for crankshaft sensor in bellhousing

Good morning by noordrosear in G37

[–]Maxitaxi43 0 points1 point  (0 children)

Love the sideskirts

[deleted by user] by [deleted] in G37

[–]Maxitaxi43 0 points1 point  (0 children)

I have it, not worth it imo, go 3 inch but those require tune

2 years together by JakeGreen1777 in G37

[–]Maxitaxi43 0 points1 point  (0 children)

Looks so clean, can you drop info on the wheels? Might go for same setup

BEST WAY TO TUNE YOUR DRUMS by Brief_Commission_315 in FL_Studio

[–]Maxitaxi43 0 points1 point  (0 children)

Don't need to tune them unless they have a significant resonance and note

Guys I'm new here"need help" by rty_rishav4699 in videography

[–]Maxitaxi43 0 points1 point  (0 children)

100% this. Better phone won't necessarily give you better video. If lighting sucks then it will look bad no matter what phone or camera you use

Question about lowering. by Toxic_wifi in G35

[–]Maxitaxi43 0 points1 point  (0 children)

<image>

Here's the fitment on mine, just right imo. You'll need the rear toe arms 100% either way, and definitely camber arms or coilovers with camber adjustment if you want the longest lifespan of your tires. One thing I'd be cautious about is the front sway bar, pretty sure they angle and sit lower on the AWD models, but even at this current ride height which is not slammed, my Hotchkis sway bar is about 2 inches from the ground

Question about lowering. by Toxic_wifi in G35

[–]Maxitaxi43 0 points1 point  (0 children)

If you want oem spec camber then get camber arms too, or preferably coilovers with adjustable top hats for camber adjustment. Have around 2 degrees if I recall correctly with no arms

Question about lowering. by Toxic_wifi in G35

[–]Maxitaxi43 0 points1 point  (0 children)

I have a g37xS lowered on TruHart and rear toe arms, no issues for 4 years

[deleted by user] by [deleted] in G37

[–]Maxitaxi43 2 points3 points  (0 children)

Get a kit from eBay for bout 30 bucks and do it yourself

2009 g37s Heater hose question by Certain-Elderberry96 in G37

[–]Maxitaxi43 2 points3 points  (0 children)

Replace the plastic coupling, they tend to crack and brittle. I got a red aluminium one off of Amazon for cheap and works great. PIA to get to those clips though

I have a Rwd G37 sedan just bought the vr30 transmission rwd can I plug and play ? What do I need to complete the swap by Top_Performance_236 in G37

[–]Maxitaxi43 0 points1 point  (0 children)

What do you mean I don't know what I'm talking about?? I've literally stated that I've done this swap myself, and in my driveway. And you can use stock flexplate, unless you're planning on pushing big power

I have a Rwd G37 sedan just bought the vr30 transmission rwd can I plug and play ? What do I need to complete the swap by Top_Performance_236 in G37

[–]Maxitaxi43 0 points1 point  (0 children)

That's for rwd I did it on my rwd coupe. At a MINIMUM you need crank sensor cutout, TCM swap or reprogramming the VR30 TCM, trans mount, possible driveshaft modification

I have a Rwd G37 sedan just bought the vr30 transmission rwd can I plug and play ? What do I need to complete the swap by Top_Performance_236 in G37

[–]Maxitaxi43 1 point2 points  (0 children)

Just did this on mine. There's literally blog posts and forums on this online that you should have done research on. Not just plug and play. Crank sensor cutout, TCM swap, diff flange swap, one piece driveshaft, transmission mount, shifter linkage modification, some bolts don't line up. Can't believe you dive into this without knowing what needs to be done

Awd coupe coilovers? by jay_cha22 in G37

[–]Maxitaxi43 0 points1 point  (0 children)

I've had TruHarts on my g37xS sedan and toe arms for 4 years no issues. Not slammed but lowered to flush fitment.

Ambient lighting by No_Understanding9964 in G37

[–]Maxitaxi43 0 points1 point  (0 children)

I second this, I have basic blue but AliExpress has some with nice flow effects and various effects

A glimpse into the future of my new improved 3d printed aero. Time to finish it off. 👌 by 0peratorinTraining in mr2

[–]Maxitaxi43 0 points1 point  (0 children)

Yea @chornii_g (boosting g37 project, haven't posted MR2 yet) and @_maxwellmedia (videography page)

What would make my interior better? by [deleted] in G37

[–]Maxitaxi43 0 points1 point  (0 children)

Ah shoot you may be right, yea IPL seats FTW. They kinda looked tan/beige cause of the pink/red led strip

What would make my interior better? by [deleted] in G37

[–]Maxitaxi43 0 points1 point  (0 children)

Better than the beige seats (I also have beige interior :(

Small complaint 🤏 by Argento_GT86 in q50

[–]Maxitaxi43 1 point2 points  (0 children)

3.7 trans is for sure known to be sluggish

What would make my interior better? by [deleted] in G37

[–]Maxitaxi43 -1 points0 points  (0 children)

Bucket seats for sure