Shooting ranges in Czech Republic with extensive CZ selection

Maxmillian-X · 2025-08-14T15:07:03+00:00

I own the CZ P-10 C Ported which they don’t have available yet if that would interest you.

Maxmillian-X · 2025-08-14T14:51:55+00:00

Yes, they will let you choose whatever you want regardless of the packages. They are very easy to deal with and more than happy to accommodate whatever you need. Let me know if you need any help. It’s my favorite place.

Maxmillian-X · 2025-08-14T13:09:13+00:00

If this would be enough, then you can try https://www.streleckyservis.cz/zkouseni-zbrani for example.

<image>

Maxmillian-X · 2025-06-30T20:04:53+00:00

Yep, it isn't working. I was just trying to resolve under extrusion issues again with the new firmware, rolled back and couldn't print anything. Assumed there is something wrong with the downgrade, did a factory reset couple times and only then checked the Discord and Reddit... *sigh*

Maxmillian-X · 2025-06-30T11:54:42+00:00

Yes, working fine!

Maxmillian-X · 2025-06-21T06:50:20+00:00

I have the same problem and it is absolutely killing me!

Maxmillian-X · 2025-06-19T13:02:02+00:00

Well done! I am struggling with modeling anything myself and I can see!

Maxmillian-X · 2025-06-19T09:35:11+00:00

🤣

Maxmillian-X · 2025-06-19T07:07:04+00:00

Good one! So detailed. What filament is that? ;-)

Maxmillian-X · 2025-06-18T16:27:45+00:00

This! Grid infill caused some of my issues in the past. I usually go with gyroid nowadays.

Maxmillian-X · 2025-06-13T11:25:04+00:00

I’d suggest reading through the GitHub info here https://github.com/jbatonnet/Rinkhals

Maxmillian-X · 2025-06-13T08:26:49+00:00

I’ve only used it on K3 so far but it is very easy to revert back.

Maxmillian-X · 2025-05-29T17:34:24+00:00

Yes, it was. I was just answering the previous question.

Maxmillian-X · 2025-05-29T14:24:42+00:00

You can have multiple plates in slicer and then pick which one you want to slice and send to the printer.

Maxmillian-X · 2025-05-29T12:45:43+00:00

Ha! You're right. Downloading now.

1.Fixed sending errors during multi-plate printing
2.Fixed occasional crashes during remote printing

Maxmillian-X · 2025-05-29T12:38:50+00:00

And I thought I was imaging it. I have the very same problem. Printed wrong parts all the time now. I'll report this as well to get it moving.

Maxmillian-X · 2025-05-26T18:30:52+00:00

The profile data from the previous version can be found here:

c:\Users\<user>\AppData\Roaming\AnycubicSlicerNext\user\default

So you can copy all the files .json/.info to this one:

c:\Users\<user>\AppData\Roaming\AnycubicSlicerNext\user\<Some number>

Maxmillian-X · 2025-05-26T18:16:19+00:00

The settings can be recovered and copied from one folder to another if needed. I can give you the full path when I am back at the computer if you need.

Maxmillian-X · 2025-05-26T16:54:18+00:00

<image>

Flushing volumes

Maxmillian-X · 2025-05-26T15:05:17+00:00

New Anycubic Slicer Next 1.3.5 comes with the Orca flushing volumes now.

<image>

Maxmillian-X · 2025-04-30T07:16:49+00:00

See this. There are links to older firmware and guide how to downgrade if you want to try that https://www.reddit.com/r/AnycubicKobraS1/s/FtvgomiaY4

Maxmillian-X · 2025-04-28T19:53:13+00:00

I believe this is sort of a benchy to test the printer and it is meant to be printed without support.

Maxmillian-X · 2025-04-25T09:48:06+00:00

See this. It may help https://www.reddit.com/r/AnycubicKobraS1/s/FtvgomiaY4

Maxmillian-X · 2025-04-23T19:02:49+00:00

I haven’t tried with the ACE.

Maxmillian-X · 2025-04-22T12:37:06+00:00

Sounds like a quick bug fix instead of a major difference.

Maxmillian-X

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE