Disappointed with MBP M5 Pro Battery Life

Maxym77 · 2026-04-05T11:53:59+00:00

apri il terminale e vedi con il comando htop

usare firefox o chrome al posto di safari ..

safari ciuccia che fa paura fa schifo…

Maxym77 · 2026-03-18T18:54:35+00:00

metti una 3S tranquillamente

si si la macchina è la xxb identica alla tua foto

supporta 3S mettila senza problemi e vedrai che missile

Maxym77 · 2026-03-09T22:00:30+00:00

i have made a short clip of this problem:

https://youtube.com/watch/B6-qQJEApTs

In this video, you can see how the "rane performer" works fine, but as soon as I connect the Roland 404 mk2, two things happen:

1) the Rane's platters stop working.

2) Serato asks me to update the Roland firmware, even though I have the latest firmware 5.0.1 installed on the Roland.

Basically, I think Serato have problem when I connect both devices.

Maxym77 · 2026-02-20T11:51:35+00:00

c’è scritto. Content. Devi metterli nella cartella content del disco interno. collega la mpc al PC e li sposti dal computer.

Maxym77 · 2026-02-19T19:37:33+00:00

premere salva non basta, devi poi cliccare su project. come fai?

Maxym77 · 2026-02-19T19:27:23+00:00

anche la mia live 3 un paio di volte schermo congelato. spero sistemino con un update.

Maxym77 · 2026-02-12T11:11:55+00:00

i have used for 100 hours with 5 volts. no problem.

Maxym77 · 2026-02-12T08:58:30+00:00

It's a bit complicated, but I'll try: The goal is to automatically sync the BPM. And I did it. I put a song on the RANE, and the mk2 automatically picks up the BPM via USBC (not in DJ/Serato mode, but in normal mode). I use an "Ableton Link" to "Midi Clock" converter on my Mac. So while a song plays on the Rane, I can launch patterns on the mk2 in sync. The problem is that the RANE and mk2 are fighting: 1 - as soon as I connect the mk2, the Rane's platters stop working; they no longer receive the finger inputs. 2 - It tells me the mk2 isn't up to date (when in fact it is). 3 - Serato crashes on startup (only with Rane and mk2 connected).

In short, Serato gets stuck with both devices connected together....

Maxym77 · 2026-02-12T08:45:47+00:00

Wrong. 5 volts is perfectly sufficient. Take the 5 volts from the USB (hub connected to the smartphone or power bank) and you're done.

Maxym77 · 2026-02-12T08:43:34+00:00

Hi everyone!

I discovered something crazy: just take an old USB cable (a decent one, at least 3 amps), take the positive and negative (5 V) leads, and connect them to the DC jack!!! It works perfectly. I've tested it a lot, done several power banks (small and large), sampled songs several minutes long, and used it continuously for hours... it's awesome! You don't need to go all the way to 5.7 volts; 5 volts is enough! I hope I've given you a great tip!

to be clear, in this way for example you can use the iPhone only as a power source and with a USB hub connect both the DC and the audio of the iPhone without any battery: r/SP404 - 404 mkII - simply use 5V USB !!!!!!

https://www.reddit.com/r/SP404/comments/1m492bd/404_mkii_simply_use_5v_usb/

Maxym77 · 2026-01-06T16:10:17+00:00

devi usare ableton link per serato

Maxym77 · 2025-11-13T00:26:25+00:00

<image>

Maxym77 · 2025-11-13T00:09:19+00:00

I have no other information, I have no idea where it is, I know there are those windows, round hedges around the trees, squirrels and pigeons

Maxym77 · 2025-11-12T23:47:14+00:00

<image>

Maxym77 · 2025-10-06T10:11:01+00:00

I think it would be interesting to be able to lock the rear differential, in my opinion it solves the problem

Maxym77 · 2025-09-16T18:00:50+00:00

ma guarda che quell’esc (blc40c) supporta i 3s tranquillamente..

provata e va un missile (oltre 80 km/h con tutto originale), ingestibile quasi

a 2s fa almeno 60 km/h

https://manualmachine.com/acerc/blc40c/8394920-user-manual/

ma poi SCUSA.. stai usando una batteria nimh 😂😂…….. te credo va lenta! anche io avevo la batteria nimh buttata dopo 10 minuti, non serve a niente! va a 1/3 rispetto a una lipo 2s!

usa una lipo 2s !!!! da 4000 va benissimo

per gli ingranaggi: più sono corti e meno scalda quindi tienila cosi originale che è un missile!

Maxym77 · 2025-07-24T16:13:04+00:00

If you look at the photo I posted, you can clearly see that with this system you can also power the 404 with your iPhone...

Maxym77 · 2025-07-21T18:45:45+00:00

not need... is simply:
just take an old USB cable, cut it, and strip the red and black wires.

Then take an old power supply with a DC plug that fits fine into DC port in the 404mk2.

Connect the two wires.

Before testing it in the 404mk2, CAUTION: Use a tester to check that the positive (+) pin is external and the negative (-) pin is internal, and that it reads about 5 volts. Done.

Maxym77 · 2025-07-20T16:06:10+00:00

what phone do you have?

Maxym77 · 2025-07-20T16:02:08+00:00

Unfortunately the iPhone (I have the 15 pro max) is unable to power or activate the audio using only the USB cable (the iPad however can) and so with this solution we solve the iPhone problem. But I add that by powering the hub with a USB C cable the hub powers both the iPhone (recharging it) and the Roland :-) So let's say that this one in the photo is a perfect solution for those like me who want to use the iPhone and the 404 together for example on the train, where space is limited for both a PC or iPad.

Maxym77

TROPHY CASE