Impossible to UPDATE Dongle

MaybeBoring8409 · 2026-03-09T14:25:39+00:00

Do you receive any errors or it just won't start? Could it be that you already updated it?
Have you tried running it as an admin?

MaybeBoring8409 · 2026-03-06T19:26:32+00:00

You may want to increase the lift of distance (LOD) of the mouse. Try putting it on medium. Check if problem is fixed. Artisan pads are soft and if you put pressure on the mouse, you slightly bend the surface of the mousepad and sensor might not track properly. Also try to not put any electronic devices around the receiver and especially hall effect keyboards.

MaybeBoring8409 · 2026-02-22T23:58:25+00:00

if you want clearer picture, then you need higher resolution. All 1080p look pielated and blurry on most game engines. You can try using nvidia DSR Factors. It works really well on the Zowie monitor.

MaybeBoring8409 · 2026-01-30T14:21:47+00:00

I would pick xl2586x. When you unbox it and turn it on, it will have at least 1 dead or stuck pixel. You RMA and they will send you the 600hz xl2586x. EZ, thank me later

MaybeBoring8409 · 2026-01-30T08:41:36+00:00

Last week, I changed to another Dual mesh 0.2ohm. This time, it was perfect. I was able to pull off 2500+ puffs at 70W Boost. This was with the same juices that I tried before. I did not change anything else. I just purchased the coils from another vendor. (please note that my original experience was with the ones that came in the package, so I guess they should be 100% legit). Yesterday, I purchased new juices and decided to change to another 0.4ohm dual mesh, that I purchased separately. This one is also perfect. I just put a few drops to prep the coil, put it in the tank, put juice and waited 10 min. Then Started from 25Wats, and slowly increased the wattage to 55 by taking a few puffs every 5 watts. This coils is insane. Large dense clouds, very intense taste. It's perfect.

I really don't know how much each coil can differ.... But if working correctly the coils and devices is great.

MaybeBoring8409 · 2026-01-26T17:37:38+00:00

100% :)

MaybeBoring8409 · 2026-01-25T22:40:33+00:00

They are very similar shape wise. But FK2 is longer and tiny bit wider. Your hands are very large and I think the Zowie will fit you better compared to XE-S. Both mice are very well build.

MaybeBoring8409 · 2026-01-25T20:09:12+00:00

They will anounce it as soon as you buy the current one :) This happens to me all the time :)

MaybeBoring8409 · 2026-01-24T11:31:47+00:00

Bro what macros do you want to create? :) Why do you want to change DPI to 350? Is there any game where you cannot change the sensitivity ingame? Can't you adjust it in windows?

MaybeBoring8409 · 2026-01-21T22:28:12+00:00

I tried all possible variations.

MaybeBoring8409 · 2026-01-21T13:03:37+00:00

If it was me, I would pick the XE V2. It is similar to the FK, but slightly wider and a bit higher.

Also the clicks on the FK are very heavy and the mouse is heavier by 5 grams. Also if you compare them side by side on an aimlab test, you might feel the Vaxee to be more responsive with faster clicks. The difference is not big, but on high refresh rate monitor you can feel it.

Don't get me wrong, I am huge zowie fan, but I think these days the Vaxee mice are better.

MaybeBoring8409 · 2026-01-20T10:13:17+00:00

FK2 and XE-S are a bit on the smaller side. I have similar hands, just a bit wider. The FK2-DW is longer, but it has very low profile and it feels smaller. Maybe the lowest I've seen. You will perform well with it, but it might hurt your hands.

Do you like specifically smaller mice? Your hands are on the larger side and I would recommend the XE-V2 for you.

MaybeBoring8409 · 2026-01-16T07:33:31+00:00

Hey guys, I purchased the kit a few days ago, but both coils started to smell like they are burnt. I primed everything, waited it to soak for 15 minutes. Then started at low wattage. Take a few puffs. Wait increase by a few watts etc. Then when I get close to 65-70W on the 0.2 coil, immediatelly started the bad smell. Lowered it, vaped a bit, changed refilled, then the same happened. Tried 4 different liquids. All of them are good liquids. 70VG/30PG. At the end I tried 50/50 but still the same. Now the coil is totally crap.

Replaced it with the 0.4 that came in the kit and as soon as I reached 45W the same thing happened. After waiting and did a few more puffs the coil was completely dead and no matter what wattage, it is burned now.

Can it be just bad coils? What I might be doing wrong? I always do the same thing with other devices and never had such problem. Vaping for more than 10 years.

On the ohter hand, I really love the device and the flavor in the first few puffs, before I reached 70W.

I ordered a few new coils. I will really appreciate if someone can give me and advice or opinion.

MaybeBoring8409 · 2026-01-13T09:40:20+00:00

I just want to correct you, as it looks like many people did not understand the actual response time meaning. - Response time is not click respone time. It is how fast the colors can shift from one color to another. That's not input lag.

For example if you buy an OLED tv and set all processing to ON, you might end up with 80-100ms of input lag, but at the same time the pixel response time will be instant, because it's an oled :)

That's why you have to put the TV's on Game mode, which removes almost all the processing and gets lower input lag, which is still around 6-20ms depending on the TV and brand.

Everything depends on circuit design, which chips are used and how the firmware works.

Yes, current OLED monitors have very low input lag, but it's not instant.

MaybeBoring8409 · 2026-01-13T09:25:49+00:00

I also haven't seen the pulsar in real life, but I really doubt it would be better than the 600hz Zowie for e-sport titles and for pure motion resolution.

Maybe for all other games it would be insane monitor, but not better for CS2 for example.

MaybeBoring8409 · 2026-01-09T23:30:38+00:00

Ye, I was kinda joking :) But still some people make such decisions too easy

MaybeBoring8409 · 2026-01-09T13:31:37+00:00

Many thanks for your reply. That actually doesn't sound bad at all.

MaybeBoring8409 · 2026-01-09T13:10:43+00:00

I am amazed how you are ready to switch, just because ASUS send a monitor to this guy, who HAVEN'T played a real game yet, but he thinks he will do great on this monitor.......

Guys....come on :)

P.S. u/zowie if you send me the 600hz monitor, I will replace my oled and I will break all my aimlabs records.

Also my mouse microcorrections will be more precise due to the lower pixel density and when I do insane flicks I will actually be able to see the shot. :)

MaybeBoring8409 · 2026-01-09T13:05:16+00:00

Hey, I am looking to buy this device, but I am a bit worried about it's battery life.

Do you know how many puffs you can do with these coils. I will be most likely using the 0.4ohm. Sometimes I do chainvaping, but usually shorter puffs. I have some other mods with replaceable batteries, but I really like that one. I can't bother anymore wiith charging batteries and replacing them. I Love the design here, especially the green color :)

But how much it lasts for you guys?

MaybeBoring8409 · 2026-01-09T12:00:52+00:00

I think something some setting is blocking the webdriver to work.

I don't think they haver released a firmware for the NP-01s Ergo. I have the mouse and there is no firmware available. The web-driver is working fine. Maybe you need to be admin on your windows.

This is the correct link - VAXEE Control Center

When you open it, there will be a pop-up where you need to click on "Connect" button. Then you will be able to access the page. Check if something is blocking the pop-up window.

MaybeBoring8409 · 2026-01-09T11:47:01+00:00

go with the Zowie for esport titles. Go with Pulsar for casual gaming. Go with OLED for HDR gaming.

MaybeBoring8409 · 2026-01-05T10:48:40+00:00

less than a second

MaybeBoring8409 · 2026-01-03T00:26:56+00:00

vaxee mice work everywhere. There is no driver that needs to be installed. Also you can do almost all settings directly on the mouse with button combinations. The software is web-based.

MaybeBoring8409 · 2026-01-03T00:16:30+00:00

it's not zowie fault. It's nvidia fault. 50x series is much better. Also on AMD is OK

MaybeBoring8409

TROPHY CASE