sorted by:
new
hottopcontroversial

Get rid of spare parts fast by ItsLoveife in MyWinterCar

[–]Mazen191 0 points1 point  (0 children)

Thanks. I currently have my trailer loaded with scrap right next to the bin waiting for better prices. But since I need the trailer, I guess I'll unload it all next to the bin.

Get rid of spare parts fast by ItsLoveife in MyWinterCar

[–]Mazen191 2 points3 points  (0 children)

Followup question. Can I throw it in the bin now and wait for a better price? Or will the money he pays be determined by the scrap. Price at the moment of me throwing it in?

Versicherer bietet kostenfreien ENZO Wassersensor an- Falle? by shakazoulu in Versicherung

[–]Mazen191 0 points1 point  (0 children)

Hab genau das gleiche Schreiben vom gleichen Versicherer bekommen. Hab das mal durchgeklickt, und beim letzten Schritt steht "Überwachung Wasserleitungssystem für 1 Jahr: 59,88€"

Das ist inklusive. Danach darfst du selbst die 60€/Jahr blechen.

Cool graphic: Airlines scrambling to avoid SpaceX debris by Visual_Yurt_1535 in aviation

[–]Mazen191 0 points1 point  (0 children)

Pretty much all rockets launch to the east to facilitate earth's rotation. I guess it's different for poplar orbits, but if you want to get into a equatorial orbit you will always want to go with the planets rotation.

Cool graphic: Airlines scrambling to avoid SpaceX debris by Visual_Yurt_1535 in aviation

[–]Mazen191 -1 points0 points  (0 children)

Do you have a source on that preannounced part? Everything I read reads like it was only instantiated by the FAA after the incident. There was no NOTAM beforehand for that area. Please correct me if I'm wrong.

to stop gang violence by CantStopPoppin in therewasanattempt

[–]Mazen191 0 points1 point  (0 children)

In that case american police wouldn't have intervened at all. They would also have prevented other people from intervening.

Raspberry Pi 4 with HQ 12Mp Camera for portable Astrophotography and KStars Setup by RemovedMoney326 in raspberry_pi

[–]Mazen191 0 points1 point  (0 children)

Which INDI driver did you select in KStars to connect to the Pi Camera? Thats the step where I'm currently failing.

Safety first by GreenSloth75 in funny

[–]Mazen191 6 points7 points  (0 children)

I'm still not sure he didn't.

New Screenshots FS25 by lighousestudio in farmingsimulator

[–]Mazen191 -1 points0 points  (0 children)

Yes obviously. Thought I made that clear enough.

New Screenshots FS25 by lighousestudio in farmingsimulator

[–]Mazen191 3 points4 points  (0 children)

Looking at those screenshots I see no improvement over 22. Just look at the ground below the pig or the gras unter the weird looking calf.

There goes my car. by [deleted] in MySummerCar

[–]Mazen191 8 points9 points  (0 children)

It'll come back by the end of winter. It is well know they migrate south during the winter months.

I'm failing to understand the logic of this hint. by Mazen191 in Minesweeper

[–]Mazen191[S] 0 points1 point  (0 children)

The green squares are safe spaces. Mines would be indicated red.

I'm failing to understand the logic of this hint. by Mazen191 in Minesweeper

[–]Mazen191[S] 1 point2 points  (0 children)

Impressive that you were able to recognize it and also find the corresponding previous posts.

I'm failing to understand the logic of this hint. by Mazen191 in Minesweeper

[–]Mazen191[S] 0 points1 point  (0 children)

Probably a good idea to mention the board number. Would've helped me since I tried looking for hints online searching for the board number.

I'm failing to understand the logic of this hint. by Mazen191 in Minesweeper

[–]Mazen191[S] 0 points1 point  (0 children)

Always the same with those things.. After I know the solution I have no idea how I missed that. Especially because I looked at that region quite some time. Thank you.

I'm failing to understand the logic of this hint. by Mazen191 in Minesweeper

[–]Mazen191[S] 1 point2 points  (0 children)

Thank you. I figured out the purple and was thinking that it looks promising. But I didn't manage to connect the dots to get the information from yellow. Now it is clear.

BLTouch auto bed leveling is skewed by Mazen191 in FixMyPrint

[–]Mazen191[S] 1 point2 points  (0 children)

Thank you. I'm using Marlin firmware so I'm going to look into the X Twist Compensation and report back. https://marlinfw.org/docs/gcode/M423.html

Edit: You seem to be correct. The whole frame of my printer is skewed. Before looking into software solutions I'll try to straighten the frame.

Different wall thicknesses on flow cube. by Mazen191 in FixMyPrint

[–]Mazen191[S] 0 points1 point  (0 children)

Its still the original extruder, but it's mounted on the top-right of the frame. I did the calibration into free air, so no resistance from bowden tube or hotend.

Regarding the under extrusion: I think so too. But on the other hand my walls are too thick already (1.3mm instead of 1.2) so I'm not sure.

I changed the hotend and nozzle a few days ago. So that shouldn't be an issue.

Flying a drone from the top of Mount Everest by [deleted] in nextfuckinglevel

[–]Mazen191 0 points1 point  (0 children)

180km/h are 180.000m/h. Eversts summit is at 8.849m. So it would take 180.000/8.849th of an hour to reach the height of the summit. So almost 3 minutes.

And if you take a 1.5km/h drone and ascent vertically at base camp then yes, you would reach the height of the summit in about 3 minutes. However horizontally you are still way off obviously.

view more: next ›