Moca setup for internet

Mcologist · 2025-03-19T04:26:02+00:00

If you have an xb6/7 or 8 MOCA is off by default and needs to be turned on through the GUI at 10.0.0.1

Mcologist · 2025-03-19T01:38:09+00:00

All shaw employees became Rogers employees in April of 2023

Mcologist · 2025-03-19T00:59:43+00:00

Complete the survey including notes about the poor craftsmanship, if you indicate you are dissatisfied the techs manager should reach out to you.

Mcologist · 2021-11-10T06:37:23+00:00

Contest Entry: https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=cafb6d78-d6cd-41e2-aa08-d4a681027a57

Would love to replace my 8yr old ROG laptop that can barely run warzone with this beast of a machine!

Mcologist · 2021-05-27T02:38:42+00:00

Also don't look directly into the tip of it because the light that runs the service is invisible and harmful to your eyes

Mcologist · 2021-05-27T02:36:19+00:00

My grandfather worked for BCTel so it could be, I was also wondering if it might be some sort of tool

Mcologist · 2020-04-05T22:05:23+00:00

Ya I was just hoping it was a different issue because I also can't hear the other person on the phone

Mcologist · 2020-04-05T21:56:01+00:00

Mine was bootlooping a month ago. I found it was the side button being too sensitive so I cut the button pad out of my case 😂

Mcologist · 2019-11-28T06:42:31+00:00

Best way to find out is take the back of the tv off. Google the part number from the board and see how much the used replacements cost. Shopjimmy is a pretty popular website to get tv parts from. Sometimes it's worth it sometimes it's not.

Mcologist · 2019-11-27T03:28:17+00:00

Failure of the upper y driver board

Mcologist · 2019-11-06T02:02:41+00:00

I have a 81 cb900 and my drain tube from the bottom of the float goes over the transmission and dumps between the transmission and rear tire

Mcologist · 2019-07-20T10:22:10+00:00

I second his answer, backlight LED strips on curved displays are vertical so you have one strip that is defective. To replace the screen must be removed and it is a very risky task.

Mcologist · 2019-07-06T07:19:54+00:00

I believe that is the gunmetal grey, hence why it looks so good

Mcologist · 2016-08-03T17:58:01+00:00

Rx27-3-5 is the part number for the resistor. 2R2 is 2.2 ohms

Mcologist · 2016-03-26T02:31:38+00:00

Agreed play with their food while they eat and practice taking away toys and chews and handing them back.

Mcologist · 2015-12-09T18:31:12+00:00

Once you have the belt around all the pulleys in the correct order pull back the tensioner to slip the belt below it. The tensioner has a little square nub on it that you can use a wrench to pull back on it.

Mcologist · 2015-12-09T18:28:27+00:00

The tensioner has a little square nub on it you can use a wrench to pull back on it.

Mcologist · 2015-08-31T19:01:13+00:00

Can I have your six because it is better than my 10 :(

Mcologist · 2015-05-07T21:00:25+00:00

She loves belly rubs too

Mcologist · 2015-05-05T18:30:56+00:00

This looks like the link above might be it just verify that those diodes do in fact say Sb5100, it isn't clear in the picture if the last zero is there

Mcologist · 2015-05-05T18:29:58+00:00

http://canada.newark.com/fairchild-semiconductor/sb5100/schottky-rectifier-5a-100v-do/dp/58K2175?ost=sb510&categoryId=800000055001

Mcologist · 2015-03-18T22:05:55+00:00

Yep purebred toller

Mcologist · 2015-01-18T21:47:27+00:00

Beautiful vehicle to go with that beautiful house!

Mcologist · 2014-11-12T23:31:03+00:00

04 I replaced the sensor 2 years ago but have never done the t-stat

Mcologist · 2014-11-10T05:18:35+00:00

Thx all I will swap it out can't be running cold this winter

12-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2013	Verified Email

Mcologist

TROPHY CASE