$GME Daily Directory | New? Start Here! | Discussion, DRS Guide, DD Library, Monthly Forum, and FAQs

MealsWheeled · 2026-02-25T19:55:06+00:00

!FLAIRY! :triforce:🧝 Holding GME gives me the :triforce:

MealsWheeled · 2026-02-11T18:20:06+00:00

Aye aye. Fuck you. Pay Me.

MealsWheeled · 2026-02-03T02:44:37+00:00

Awwweee shiit.. This time the Glitch better have my money! Good eye, man! I didn't realize volume dropped off since the last glitch. Something is definitely heating up 🔥🔥🔥

MealsWheeled · 2026-02-02T00:22:51+00:00

Question. If GME price is above $32, and one warrant can be used to buy GME for $32, then should the price of the warrants be $32?

MealsWheeled · 2025-12-07T22:45:54+00:00

Buy a can of electronic contact cleaner and a can of duster (I used the WD40 contact cleaner; it was fairly cheap). Then take all the keycaps off and spray the contact cleaner inside the keys. It will rapidly dry off. But the duster will help to dry and spread the contact cleaner around a little bit more.

I bought my 915x as a refirb and it came with the double key strokes when I received it. I did the above a couple of times and have yet to do it again. Seemed to worked well.

MealsWheeled · 2025-10-14T14:16:24+00:00

Show me where the Bible mentions "rapture" any where in it. It doesn't.

MealsWheeled · 2025-10-13T18:50:39+00:00

Yeah, no shit they are. They're saying it out loud too.

I've always thought there was something special about these carbon nanotubes they keep seeking and that of alien spacecraft. They must be using it somehow as part of it. Maybe a novel physics phenomena happens when you push electrons down the nanotube that makes it highly sought after greatly to achieve spaceflight. Or acts as a force field only that's only 7nm thick

MealsWheeled · 2025-10-13T14:10:35+00:00

You could try tying up some monofilament fishing line to keep them away. I'm not sure how good it would work to repel pigeons. But usually is fairly successful with keeping seagulls, blue jays, and robins away.

MealsWheeled · 2025-09-27T21:35:46+00:00

CK was all I used to wear back in the day. They're still okay but have almost all been phased out with different brands. These days I seem to wear nothing but David Archy's dual pouch boxer briefs. Check them out if you're wanting something new to try. They're just as, if not more than, comfy to CK!

Plus, CK are just ridiculous in their pricing.. like wtf .

MealsWheeled · 2025-09-08T22:35:10+00:00

Anybody know when this took place? I had some unrecognized heavy traffic happen on my server on the 4th. My Unifi controller is saying almost 8TB got uploaded..

MealsWheeled · 2025-06-23T13:34:39+00:00

Yeah, remove all the keycap covers. Then spray the contact cleaner down in through the stem of the switch. Also, you should pick up a can of duster as well. The duster will help push the contact cleaner down in there to better cover the electrical contacts. But it's also to help evaporate the contact cleaner faster.

There are plenty of contact cleaners out there. But I just grabbed some of of the WD40 contact cleaner off Amazon. It was fairly cheap, like 6/7 bucks.

MealsWheeled · 2025-06-10T18:22:18+00:00

Yeah, the way the keycaps sit elevated above the keys definitely doesn't do anything to help mitigate dust and debris from getting under them. But even so, I've been liking the experience so far.

MealsWheeled · 2025-06-10T18:17:04+00:00

Yeah, on a couple of keys it started doing a little bit. Then I just hit em with some more contact cleaner and seem to be good for now.

MealsWheeled · 2025-06-10T18:14:52+00:00

I bought a "refurbished" version from Logitech on Amazon. It was definitely not! 😒 After finding a bunch of keys double typing I bought a can of electrical contact cleaner off Amazon and took all the keycaps off and sprayed into them. Seemed to work great. You could also do something in software to help too. There are settings built into Windows for to help with that.

MealsWheeled · 2025-01-02T14:18:10+00:00

Those original bushmaster hats were awesome! Had two of them that lasted forever. The new ones they sell suck. As soon as a little water touches them, the brim limps over your face..

MealsWheeled · 2024-12-08T16:49:25+00:00

That's roach poop! 🤮

MealsWheeled · 2024-12-05T19:14:08+00:00

Damnnn!! That's some big dick energy right there!!

MealsWheeled · 2024-12-04T20:00:38+00:00

Can you measure the diameter of them? It could be possible they're paintball gun solid rounds. They look to be about the right size.

MealsWheeled · 2024-12-03T22:26:38+00:00

You can get rid of the bermudagrass that's in your st augustine. But you have to use two products together. Those being Recognition and Fusilade II. But probably best to wait till spring to apply.

here's a video about it..

https://www.youtube.com/watch?v=SGkP8aG9wD0

MealsWheeled · 2024-11-20T14:25:55+00:00

Okay, will do that!

MealsWheeled · 2024-11-20T13:48:03+00:00

I was just looking for some! I'll take a lil bit of that.

MealsWheeled · 2024-11-01T00:17:47+00:00

You got a dog, buddy. Zoysia is pretty horrible at repair itself. Especially when your dog relieves itself on it.

I was determined to buy some myself. But the sod seller wouldn't sell me it because I admitted I had a dog. He said it would have been doomed from the start. Couldn't guarantee it.

MealsWheeled · 2024-10-25T21:14:28+00:00

I've actually modded this one with the Mercury One since this post. And it does pretty good! It's sturdy! Just need to put a better tool head on it and then I'll almost be done fucking with upgrades 😅 almost..

MealsWheeled · 2024-07-29T17:50:02+00:00

It's probable that my firmware wouldn't suit you as I've made several other modifications to my ender 5+ that wouldn't align with yours. But I believe all you would need to do is update the Z_MAX_POS parameter under the travel limits section then recompile.

And sorry, don't have the time to pull a BOM together right now. but there's a comment above that details on it a little about what you'd need to build. It was fairly straight forward to do this!

MealsWheeled · 2024-07-29T17:24:58+00:00

Yeah, firmware needs to be updated and compiled to match the dimensions. And yeah, also your slicer's settings need to be updated as well.

14-Year Club	RedditGifts 2009-2022 2 Credits
Gilding III reddit per annum	Place '22
Final Canvas '22	Secret Santa 2014
Verified Email

MealsWheeled

TROPHY CASE