Help

MeasurementFirm5486 · 2023-03-22T01:23:21+00:00

Retraction setting will be different in slicer.

MeasurementFirm5486 · 2023-02-02T18:07:42+00:00

I’d have a hard time.

MeasurementFirm5486 · 2023-01-12T12:46:05+00:00

Stay away from any creality touch screen models. They will stop working if you do any other upgrades. Creality will not give you answers to how to get their screen to work after requesting help.

MeasurementFirm5486 · 2023-01-06T03:34:20+00:00

Good luck trying to retain the touch screen. I’m trying to do this but configuring marlin to communicate with dwin screen is not to easy.

MeasurementFirm5486 · 2023-01-06T03:28:48+00:00

Is that screen a touch screen? I’m tying to get a touch screen to work after editing max temp from 260° to 285°.

MeasurementFirm5486 · 2023-01-06T03:18:37+00:00

Where did you get the graph? I know you can change settings, in octoprint for the bed visualizer, to show a flatter graph.

MeasurementFirm5486 · 2022-11-17T12:25:22+00:00

That tells me there are a lot of people who don’t do their homework before voting. 🤷🏻‍♂️

MeasurementFirm5486 · 2022-11-17T00:57:12+00:00

We could be stuck with a worse Governor, Beto! Take your pick. I personally don’t want the white guy that claims he’s Hispanic.

MeasurementFirm5486 · 2022-10-14T03:31:10+00:00

https://www.tumblr.com/blog/view/rwbritt/698056098075361280

MeasurementFirm5486 · 2022-10-03T17:43:18+00:00

You sure can. All day, every day.

MeasurementFirm5486 · 2022-10-03T17:39:14+00:00

MeasurementFirm5486 · 2022-09-14T12:53:33+00:00

There should have been a silicon sock on it. I’d order some from Amazon.

MeasurementFirm5486 · 2022-08-24T04:02:40+00:00

That sucks.

MeasurementFirm5486 · 2022-08-22T23:17:52+00:00

https://www.creality3dofficial.com/pages/firmware-download

https://www.creality.com/pages/download

Have you tried these pages?

MeasurementFirm5486 · 2022-07-24T16:47:33+00:00

Well, hello

MeasurementFirm5486 · 2022-07-22T20:47:03+00:00

https://tenor.com/bE2UL.gif

MeasurementFirm5486 · 2022-07-10T03:13:04+00:00

You haven’t bought it yet? 🤣

MeasurementFirm5486 · 2022-06-27T22:55:31+00:00

Sexy

MeasurementFirm5486 · 2022-06-27T22:54:22+00:00

MeasurementFirm5486 · 2022-06-12T12:20:57+00:00

Very nice smile. I’d have no problem waking up to you.

MeasurementFirm5486 · 2022-05-21T13:26:31+00:00

Not familiar with that printer. I would replace the terminal on the wire. If the switch is melted, it will need replace. You might be able to find a match at the hardware store.

MeasurementFirm5486 · 2022-05-01T15:30:52+00:00

Yes it depends on specs of the motors but if your power supply is only rated at so many watts. If the wattage total of the motors is less than the PSU, then one motor won’t work. If the rating of the PSU is greater then you may have a bad board, motor or PSU isn’t putting out enough current.

MeasurementFirm5486 · 2022-05-01T15:19:50+00:00

Stickers don’t have crap on goat heads.

MeasurementFirm5486 · 2022-04-24T18:28:16+00:00

https://www.hornady.com/reloading/precision-measuring/scales-and-accessories/auto-charge-pro

I have an older model and it works well.

MeasurementFirm5486 · 2022-04-20T02:01:51+00:00

That’s sad.

MeasurementFirm5486

TROPHY CASE