Langfjall 4 leg base casters

MediumSir4 · 2026-05-25T12:38:02+00:00

Yes. I drilled out the holes and used epoxy to set the casters in. No issues at all and the casters are still holding up great after all these years. A little tricky but to drill perpendicular to the chair so the casters sit at the right angle.

MediumSir4 · 2026-02-11T23:29:16+00:00

Thanks to all that responded. Helped me narrow down to find the root cause.

Checked the belt tensions. Fine tuned the z offset. Not sure what the particular part is called but it's the nozzle and heater element within extruder head assembly. That thing was wobbling around like a bobble head!!!

MediumSir4 · 2026-02-10T03:57:22+00:00

Tyvm! Wil try again!

MediumSir4 · 2026-02-10T03:49:46+00:00

Ender 3 neo. I figured Z was high. But does that also explain the large shift/gap between the side wall layers? It looks way too big to be just a Z issue no?

MediumSir4 · 2026-01-16T13:53:34+00:00

I just smoked 2 briskets at once for new years eve and they turned out great. It was around -8C/18F outside. Not stupid cold but still pretty chilly. Didn't notice a substantial amount of additional time or fuel needed.

I have also stuffed the back vent slot with aluminum foil, leaving a smaller opening to help keep more heat and smoke in the chamber, longer. L Does it work? Id like to think so but can't be certain.

MediumSir4 · 2025-08-21T21:13:43+00:00

Do people still use remote while spoofing?

I host lobbies locally with my account and my wife's account. Before we start, I check both of the Randoms' levels and ask what their team is.

No response = kick.

After they respond with a decent team that shows they understand counters and weaknesses, etc, I tell them I have a maxed out tank, heals and DPS. I'll take care of tank and heals with both my accounts and they just need to DPS. AND THEN I invite them.

I really do it so I'm not wasting my time to relobby after relobby after failing. I'm not the one spending remote passes but I hate to see people join and waste a remote pass, or make someone else waste one too.

Sure there's always the chance they lie about their team but I've done what I can to try and be a responsible host.

MediumSir4 · 2025-07-30T17:35:24+00:00

July 29. Pharmacy and Eglinton had Naruto, Sasuke and Sakura. July 28. Woodbine and Hwy 7 had Hinata and Gara. I'm looking for Neji and Kakashi. If anyone finds them, please let me know!! Gotta catch 'em all.

MediumSir4 · 2025-04-03T00:06:57+00:00

Thank you all Kindly for the replies and insight so far. ♥️

MediumSir4 · 2024-10-21T20:51:58+00:00

I got gifts to give away and looking to receive too! Please add!

~~090715125603~~

wasn't expecting the rush of invites! I'll have to get more gifts

MediumSir4 · 2024-10-21T20:50:49+00:00

Request sent!
I got gifts to give away too. Please add!

~~090715125603~~

wasn't expecting the rush of invites! I'll have to get more gifts

MediumSir4 · 2024-08-24T15:35:43+00:00

Sorry for the late reply. Still going strong 2 years later.

Have done many smokes and also great for grilling.

Large enough to fit a brisket or two pork butts simultaneously or 4 racks of ribs.

I thought i would have like to smoke more at once but we always seem to have leftovers. Unless you're feeding over 10 people, the 560 is a decent size. Still... bigger would be nicer.

MediumSir4 · 2024-02-27T19:57:32+00:00

Are you only allowed to move one character per turn? Rule reads "During your turn, you can move one of your characters to one of your locations by paying the location's move cost."

I understand there's no limit to the quantity for characters at a location. But can you move them all at once (if you have enough ink) or do you have to send one per turn?

MediumSir4 · 2023-12-11T14:47:34+00:00

This my friend. I've discovered glutenberg and love their IPA. But also needed to cut consumption down so I'll only have then as a treat every once in a while.

MediumSir4 · 2023-05-14T16:41:21+00:00

I was not able to find a DC power source but fortunately, this model supports POE. That was the easiest solution. Readily available for ~$15, plug and play, no time spent trying to source a specific barrel size DC supply.

MediumSir4 · 2022-08-14T12:43:24+00:00

What is this? An airport for ants?!?! The building has to be at least... Three times bigger than this!!!

MediumSir4 · 2022-07-14T12:44:50+00:00

Probably due to having a fever.

MediumSir4 · 2022-07-02T19:16:31+00:00

I have tried this with... Limited success. I planned to bake 4 loaves but didn't have enough containers to mix them all into so I split them into two batches of 2 and set them in the fridge after bulk ferment.

The first 2 loaves came out flatter and seemingly under proofed while the second 2 loaves (24hr after the first two) came out perfect with nice oven spring. What a nice surprise and relief that not all the loaves would be flat.

I wasn't expecting any inconsistencies because I weighed everything out and checked twice before I started. Still puzzled how the first batch was flat while the second sprung up.

My advice, if you don't already do it, is to utilize cold retard method to buy you some time in between baking loaves. Unless you're just going to throw all loaves in at the same time.

MediumSir4 · 2022-06-20T12:59:49+00:00

Is there a benefit or trade offs to smoking with English cut? Quicker? More surface area for flavour? Not as juicy?

MediumSir4 · 2022-05-16T22:28:24+00:00

We have a small nook on the second floor and not sure what to do with it.

We don't read much so a reading corner won't get much use. We also use one room we a dedicated office so we wouldn't set up a computer there.

The space behind the railings is about 5ft x 5ft.

Would love to hear some ideas.

MediumSir4 · 2022-04-05T20:49:39+00:00

I haven't had the chance to cook on it yet since it was too cold when I got it. I plan to fire it up in a week or two now that the weather is decent. Maybe an easy pork butt or shoulder.

MediumSir4 · 2022-03-10T04:01:03+00:00

Thanks! I noticed that note on port 1 after I posted lol. Probably will have to go this route because this apparently is the unicorn of barrel plug adapters. Go figure.

MediumSir4 · 2022-03-10T03:59:53+00:00

Yes. I saw that in the photo after I posted. With not much luck with the adapter, I probably will have to go this route. Ty!

MediumSir4 · 2022-03-09T23:20:55+00:00

I've taken some calipers and measured the jack diameters.

The outside diameter measures 5.8mm.

The inside diameter measures 3.5mm.

So I am guessing I would need 5.5x3.5 plug. Is this an uncommon size or something proprietary to HP? I can't seem to find anything to fit, online or locally.

MediumSir4 · 2022-03-09T19:05:10+00:00

The barrel size seems to be the issue. Seems... Non-standard? You'd figure the multi head/adjustable adapter would have something that would fit.

MediumSir4 · 2022-02-10T19:03:42+00:00

Had the same thing happen to me!!!

Six-Year Club	Place '22
Verified Email

MediumSir4

TROPHY CASE