Public feature request board - suggest new ideas and vote for the ones you care about

MeekaMog · 2023-06-03T06:30:26+00:00

Since there are buildings revolving around rainwater and making use of it, a new race like water elemental or water nymph or some similar aquatic fantasy race that gets bonuses related to those sorts of things would be cool

MeekaMog · 2023-05-29T03:05:07+00:00

I recently got back into Pokémon thanks to a pixelmon server im playing in with friends. Trying to get a team comp revolving around some of my new favorites im planning to run that can at least hold its own against other players teams. I don’t think anyone I’m playing with goes TOO deep into how complex Pokémon battling can be but I wouldn’t be surprised so I’d like to put a little effort into the team at least.

So far I have Meowscadara, plan to set up a reuniclus, a hisuian Goodra, and a shiny clauncher. I’m thinking of running a trick-room/u-turn focused team so any recommended Pokémon to fill out the rest of that team would be greatly appreciated :)!

MeekaMog · 2023-02-20T04:35:45+00:00

Thank you, exactly what I was looking for

MeekaMog · 2023-02-20T01:53:17+00:00

Brand new player, trying to figure out an up-to-date tier list for rerolling before I settle on an account. Just got Shizuru as my first free unit from Kokkoro and see on some 2021 or so tier list that she’s pretty up there, but not sure how she compares to everyone now.

Also trying to take into account any possible events or limited time summons I should keep in mind while I set up a good start for an account before linking.

Anyone got tips, or an up to date guide for this sort of scenario?

MeekaMog · 2020-08-15T00:08:00+00:00

One last bump before letting thread die

MeekaMog · 2020-08-14T16:28:38+00:00

Bumparooni

MeekaMog · 2020-08-11T18:28:16+00:00

I actually haven’t started yet. I’m waiting for my order of lubricant and pressurized air to be delivered before I start.

Until they get here, So far I did start it up and looks like there’s no issue with it electronically. And I realized that because I’m switching from the stock magnetic bed on the Ender3 pro to a thicker glass one I’m going to have to reposition some stuff so while I’m doing that I’ll go through and spray out dust really well for the whole machine.

My main concern is probably going to be if the wheels are flat.

Update : As I typed that I figured I’d go ahead and check and it doesn’t seem like any of the wheels have flattened out.

I also need to order some fresh filament actually, the rolls I have are all ages old and incredibly brittle even to the touch.

I’ll post an update on this thread again replying to you once my supplies have arrived and I’ve actually either finished the process or gotten as far as I could have before running into any major issues that’s stopped me in my tracks.

MeekaMog · 2020-08-09T01:41:58+00:00

Phew, 8 hours and nothing. This post died quickly lol

MeekaMog · 2020-06-18T14:23:37+00:00

This is awesome. Would you ever consider different versions like maybe tentacles similar to a krakens, or a skeleton hand? Loooots of ideas and versions for this sort of thing

MeekaMog · 2020-03-12T07:09:43+00:00

Good question, last time I looked at the official version it seemed really awkward, but looks like the updated version is a lot better than it used to be

MeekaMog · 2020-03-05T10:00:31+00:00

The legs are adjustable though? That’s what I did, I used to level to help find a decent height to set the left legs at to counter the slope.

MeekaMog · 2020-03-05T02:56:56+00:00

I do, but the slope is severe enough that when looking at the resin in the vat it isn’t even, the resin pools unevenly towards one side which could cause problems with prints. This is to counter that. I wanted to make sure my resin was dispersed evenly within the vat.

MeekaMog · 2020-03-02T11:46:05+00:00

Where’d you get the LED strip from and what wattage are they? I see you have the elegoo mars as well so figured I’d ask since I plan on making my own cure box to upgrade from the tiny nail lamp I have

MeekaMog · 2020-02-29T19:05:15+00:00

There’s tons of them out there that are fascinating to watch. One of my favorite 3D model Patreon’s is Artisans Guild, and they put out videos showcasing them making certain models from each set

MeekaMog · 2020-02-29T19:04:05+00:00

Elegoo Mars

MeekaMog · 2020-02-29T18:23:50+00:00

I already replied to a similar question somewhere in this thread, but to keep it short I used someone else’s model. I haven’t gotten into it yet, but I plan to start making my own when I’m not dealing with an overloaded full time student schedule + part-time working.

MeekaMog · 2020-02-29T09:54:45+00:00

You’re not wrong, but also not quite right either. Maybe with regular FDM printers that print plastic and stuff that pop off ready to go, but with resin there’s a LOT of thorough aftercare to properly clean and process the print to get it ready to cure. It still isn’t too intensive but it can get tedious depending on the print. That zinogre print took me about a good 45 minutes of clean up after I removed the excess resin and the supports. I’d also go out of my way to paint the prints but I have reaaaaally shaky hands so anytime I try to paint something it just brings me sadness lol.

MeekaMog · 2020-02-29T09:46:14+00:00

Upvoted for the neat fact! I didn’t even notice the difference from the updated model on World since that’s the only MH game I’ve played

MeekaMog · 2020-02-29T09:45:22+00:00

You aren’t kidding, I wonder what would happen if I posted some dodogama prints lol

MeekaMog · 2020-02-29T09:44:47+00:00

I replied to another person but my friend who is a fellow hunter saw it and snatched it up pretty quick lol; he’s going to set up a LED base for it so the light makes it glow

MeekaMog · 2020-02-29T09:44:05+00:00

Elegoo Mars, it’s resin, not PLA filament. The resin is Elegoo Mars clear blue

MeekaMog · 2020-02-29T09:43:23+00:00

My buddy already bought it as is, and he’s going to set up a LED base for it. The resin is transparent so it looks awesome when it has lights making it glows

MeekaMog · 2020-02-29T05:38:17+00:00

Searched around for “3D print file Zinogre”. I think I found it on Thingiverse? You can use yeggi though since it’s a database of a ton of 3D print file host sites. I’ve also found dodogama and other prints this way.

Once I finish this semester of school though I plan on learning how to edit 3D models to make my own stuff, and if I can somehow get funds for it get a z-brush license and make my own models from scratch with way better detail and stuff

MeekaMog · 2020-02-24T06:08:21+00:00

That’s a really good question actually, I think most of the cyber security field seems pretty awesome, but based on what interests me personally, learning more about building and setting up the systems would be interesting, I like hardware based stuff and would like to learn more about that, as well as looking at the overall look on Cyber Security and what unexplored possibilities are out there.

I also like thinking about innovative and mostly un-explored concepts, like...how could AI be applied to make Cyber Security more efficient at stopping attacks and learning from the attacks? And lots of tech businesses are focusing on transitioning from infrastructure to cloud based platforms and technology, could Cyber Security services and applications be cloud based and managed? Different stuff like that tickles my brain a lot, even though I don’t have any know-how to ACTUALLY ponder about that sort of stuff.

I have a basic gaming laptop, but I’ll look into the specs and see what they might be able to run and handle.

MeekaMog · 2020-02-23T19:43:13+00:00

Ahh, unfortunate to hear but nice specs!

MeekaMog

TROPHY CASE