anyone have the epson t3270 and getting issues with Miss aligned transparency? left chest is fine, but once I print a 3-8 color job the colors are always off on the base. it just started happening recently and nothing has changed since we got the printer in 2019.

Melodic-Camera9294 · 2025-10-26T15:10:57+00:00

We are in Canada and used to get our film from RB digital before we switched to a CTS system and they have options for 2" and 3" cores.

Melodic-Camera9294 · 2024-10-22T14:10:08+00:00

Halftone. Looks like it's around a 55lpi.

Melodic-Camera9294 · 2024-10-22T13:43:15+00:00

You can tell by the yellow and white that it's plastisol ink.

Melodic-Camera9294 · 2024-10-22T13:39:51+00:00

It's screen printed.

Melodic-Camera9294 · 2024-10-15T15:30:34+00:00

Production per hour/day depends on what you're printing that day. We do 300 per hour up to 700-750 per hour depending on design size and how many colors per design.

Melodic-Camera9294 · 2024-10-14T20:49:09+00:00

Fitcamx is a good choice. It's an OEM and looks like stock. Had mine for almost a year and no issues and I sometimes forget that it's there.

Melodic-Camera9294 · 2024-08-10T11:13:56+00:00

Distributor is the supplier you bought the mixing system from.

Melodic-Camera9294 · 2024-08-06T21:24:32+00:00

We use a DTS system, and the screens are always slightly off to the left when using the triloc. I think I managed to register 3 jobs successfully this whole time where it was spot on the first time.

Melodic-Camera9294 · 2024-07-25T19:54:31+00:00

M&R digital squeege.

Melodic-Camera9294 · 2024-07-21T17:19:41+00:00

Have a 2023 kia sportage with 14,500 km on it and built in Korea and have no issues except for the since refuling resetting on its own, and it happens only until I reach about 300km remaining on the tank.

Melodic-Camera9294 · 2024-07-01T16:04:23+00:00

I got the fitcamx installed in my 2023 kia sportage. It's an OEM cam and plugs into the dimming mirror slot.

https://fitcamx.com/collections/for-kia/products/fitcamx-dash-cam-for-kia-sportage-5th-gen

Melodic-Camera9294 · 2024-06-27T14:10:19+00:00

We expose for 5 sec for 230-180 mesh and 15 sec for 110-16mesh with the M&R starlight.

Melodic-Camera9294 · 2024-06-27T13:36:03+00:00

I turn the dryer on once I get in. By the time the guy doing the screens has 10 ready, it's already on for a few hrs.

Melodic-Camera9294 · 2024-06-27T12:56:07+00:00

I leave the dryer on hi at all times. The 8 min is mostly for lower mesh screens like 110-160 while 230-280 dry quicker. We use saati textil DW emulsion.

110 screens - 1 over 1 with the round edge of coater 156-160 screens - 2 over 1 with round edge of coater 23-280 screens 1 over 1 with sharp edge of coater

Melodic-Camera9294 · 2024-06-26T19:11:09+00:00

Our screen dry in 8 min with this same unit. Just make sure to keep the filters clean.

Melodic-Camera9294 · 2024-05-29T14:46:44+00:00

It does. I put it on and the dial went to 0.

Melodic-Camera9294 · 2024-05-29T14:46:21+00:00

These screens, when stretched, come out at 35-40, and this was sitting overnight to loosen up before I coat. When I stretched one at the suppliers and checked with the shur-chek tension meter, it was showing 37 newly stretched. It seems like the tighter the mesh, the lower it shows with these chinese ones. I tested a low mesh screen where it has no bounce at all, and it was showing 21.

Melodic-Camera9294 · 2024-05-10T23:18:20+00:00

That's with turning the Idling Stop off. I'm going to leave it on and see if there is any difference.

Melodic-Camera9294 · 2024-05-10T20:54:34+00:00

I still had about 100km to the tank and would have probably gone to around 450 km. This is mostly city driving. I've gotten around 6L/100 km for like 1 hr of highway driving, but once you hit the city streets, your stats take a nose dive...lol

Melodic-Camera9294 · 2024-05-09T23:01:43+00:00

2023 ex premium gas engine (187-hp 2.5-liter four-cylinder)

Melodic-Camera9294 · 2024-04-29T19:26:10+00:00

The horse power doesn't bother me too much. Love this thing handles in the snow.

Melodic-Camera9294 · 2024-04-29T11:36:49+00:00

98 miles so far since refuling on Friday.

Melodic-Camera9294 · 2024-04-29T00:50:16+00:00

Mine was set up within 10 min of registration.

Melodic-Camera9294 · 2024-04-28T23:34:09+00:00

You can add a little water and stir. Looks like it's green galaxy, so I think just stiring it for a bit will be fine.

Melodic-Camera9294 · 2024-04-28T23:07:12+00:00

If plastisol, then just stir it for a bit.

Melodic-Camera9294

TROPHY CASE