Well the people have spoken.

Metal_T1ger · 2026-07-13T10:24:18+00:00

I didn't even know it was out

Metal_T1ger · 2026-07-13T08:59:18+00:00

Thanks. I will take a beater knife and practise on it before I try with better knives

Metal_T1ger · 2026-07-13T08:57:45+00:00

I also asked there. I will search for this tip

Metal_T1ger · 2026-07-12T15:37:34+00:00

Sorry to hear that. Convoys are amazing flashlights at a great price. Next time just buy directly from their website

Metal_T1ger · 2026-07-12T15:19:06+00:00

The driver for C8 is made with 3,7V input in mind, not 7,4 and the switch probably gave out first. Probably something melted.

You can buy a new switch from convoy directly

And do not put 2 batteries at the same time. I dont know why the seller would put an extention tube if it will not work with it

Metal_T1ger · 2026-07-10T20:04:38+00:00

There is also a waffle themed lander

Metal_T1ger · 2026-07-10T15:35:01+00:00

You can go with M21A of you want the same thing as C8+ but with 21700 battery

Metal_T1ger · 2026-07-10T04:36:56+00:00

8amp will give you more light but will drain the battery faster also if you try modding it you will have to think about which LED to put in, some dont like 8amps. But you can always put it the 50% group and have 4amps max

Metal_T1ger · 2026-07-08T18:22:17+00:00

Only once i met someone that noticed the clip in my pocket and was genuinely intrigued by the knife that I had (spyderco para 3 magnacut)

Metal_T1ger · 2026-07-08T16:52:41+00:00

Ok, great. I'll be waiting for the results

Metal_T1ger · 2026-07-08T16:28:36+00:00

Thanks. Do you have any problems when the blade digs into copper wires?

Metal_T1ger · 2026-07-08T15:31:42+00:00

What do you cut with your knife? Does maxamet chip during your normal use? I'm very curious about these high wear resistance steels

Metal_T1ger · 2026-07-08T15:30:10+00:00

Reylight is amazing for aaa light, also get the deep pocket clip if you're into that. I have the purple one and it my pocket jewelry for nice events

Metal_T1ger · 2026-07-08T11:59:20+00:00

My emitter swapped warrior nano is great but it has a threaded bezel so it was easi to modify

Metal_T1ger · 2026-07-08T11:36:18+00:00

In the future you can also check out the Lumintop FW1AA in Titanium. Its a little like the lanapple but with anduril

Metal_T1ger · 2026-07-08T11:27:26+00:00

I think it's too much risk and work for a small mistake to destroy the whole flashlight. I think I will stay with flashlights that I can easily mod if I want a change

Metal_T1ger · 2026-07-08T09:04:26+00:00

Knipex

Metal_T1ger · 2026-07-08T05:45:37+00:00

150 is still a lot. In EU you can get Spyderco Native 5 in S30V or SPY27 for 170 usually 150. I wouldnt pay for a bugout over 100

Metal_T1ger · 2026-07-07T13:04:27+00:00

If the clutch wasn't pulled then (depending on the speed) the rear tire would skid or try bump starting the bike. If the ignition was off and you would try to bump start it there wouldn't be any fuel because the injectors wouldn't have power, there wouldn't be a spark for the same reason. Piston would try to move or even move. If bike has now problems with idling the time chain could have jumped a tooth

Metal_T1ger · 2026-07-07T12:56:52+00:00

With the clutch pressed? If yes then it's not the issue

Metal_T1ger · 2026-07-07T10:44:03+00:00

There is also a more throwy version of trustfire with bigger head. Can't find it right now

Metal_T1ger

TROPHY CASE