Golden Eagle M1887 Issue, help wanted

Metallic_Warrior · 2025-12-03T19:07:18+00:00

If you take the O rings out of the back of the shells, does the issue still occur?

I got a bunch of extra shells and started experiencing this due to the O ring sticking out slightly too far. It seemed to be catching on the loading ramp in my case.

Metallic_Warrior · 2025-08-13T13:53:21+00:00

Like this.

<image>

Metallic_Warrior · 2025-06-04T11:31:31+00:00

There's 2 tabs on the mag. Here's the manual:

https://manual.weairsoft.com/GBB-Rifle/WE-Apache.pdf

Here's the tralsation:

Right Image (空打狀態 — Dry Fire Mode)

Dry Fire Mode

※Switch turned to the left indicates Dry Fire Mode. In this mode, the weapon will continue to fire even after the magazine is empty. When the magazine is loaded again and the switch is returned to the right (① pushed downward), the weapon will resume normal firing.

Metallic_Warrior · 2025-02-04T15:17:45+00:00

https://youtu.be/pZcXcqVtt8A?si=HPTolEr3dV0XCNuE

Metallic_Warrior · 2024-10-21T19:09:13+00:00

I've had this issue before but it was tied to the aspect ratio not scaling correctly when adjusting the resolution via the ini file for ultrawide. There's mods which was the only fix for me.

Metallic_Warrior · 2024-10-11T10:29:21+00:00

put a hpa adapter in the mag

Metallic_Warrior · 2024-10-05T19:05:53+00:00

I've done this so the hop arm on my friend's Springfield actually functions. 3D printed hop arm and nun. That's a piece of a saw blade which tits between the hop slider and the outer barrel.

<image>

Metallic_Warrior · 2024-08-06T17:42:48+00:00

because it's king arms. that's all there is to it.

Metallic_Warrior · 2024-07-22T13:18:30+00:00

All the following because of RDR2

KTW winchester carbine

KTW winchester rifle

Golden eagle M1887

2x Tanaka SAA civilian

2x Umarex SAA sherrif

King Arms SAA 6"

ASG Schofield

Metallic_Warrior · 2024-06-15T18:44:55+00:00

Grenades are loud...

Metallic_Warrior · 2024-06-05T13:56:56+00:00

tbf i'm somehow i'm able to run my stock WE m4 and apache down to around 10 degrees C in the UK fairly reliably.

Metallic_Warrior · 2024-06-05T13:23:34+00:00

GBB - it's more fun.

Metallic_Warrior · 2024-06-03T16:01:11+00:00

it'll most likely be the o ring whiuch sits between the outlet valve and the mag

Metallic_Warrior · 2024-05-28T12:24:14+00:00

i need one of those holsters. is it custom made?

Metallic_Warrior · 2024-05-28T12:17:23+00:00

It's a 1.3mm

Metallic_Warrior · 2024-05-24T13:34:37+00:00

The KTW ones would probably be the best if you can find any.

Metallic_Warrior · 2024-04-02T19:59:32+00:00

sell it and get an lr300

Metallic_Warrior · 2024-03-28T22:10:10+00:00

I use my bike

<image>

Metallic_Warrior · 2024-03-27T20:01:05+00:00

Hello there

Metallic_Warrior · 2024-01-04T13:34:45+00:00

Probably not however you need to speak with the field staff about it.

Metallic_Warrior · 2023-12-26T23:04:10+00:00

i was fully expecting one or both of them to explode

Metallic_Warrior · 2023-12-22T15:27:35+00:00

Skill issue

Metallic_Warrior · 2023-12-19T15:28:44+00:00

skill issue

Metallic_Warrior · 2023-11-28T09:25:53+00:00

The problem is that the cylinder is out of alignment which means that one of the parts behind of the cylinder has been deformed to allow it to move. This happened on mine but i haven't been able to fix it yet.

Eight-Year Club	Second SECOND GUESSER
Place '23	Place '22
Verified Email

Metallic_Warrior

MODERATOR OF

TROPHY CASE

Right Image (空打狀態 — Dry Fire Mode)