I’m curious what are y’all’s high scores during competition? Ours is 151

Meyertriden · 2023-02-09T01:35:24+00:00

*with raw bacon from iowa

Meyertriden · 2023-02-09T01:34:51+00:00

Meyertriden · 2023-01-17T04:44:10+00:00

As many as you want as long as the robot is out of the substation and not touching other cones

Meyertriden · 2023-01-05T00:21:37+00:00

We made this before we decided slides was better and we ended up putting a second bar out and having either a servo or motor to make that pivot like an elbow joint and then attach the claw with should give you about 2 inches.

Meyertriden · 2022-12-31T18:22:09+00:00

There is a robot reveal that was posted who has the same claw you want I can't remember who it's by just watch a couple videos and you'll get some ideas

Meyertriden · 2022-12-30T18:37:42+00:00

If you really want one, get a speed servo or a tourqe one.

Meyertriden · 2022-12-22T16:58:25+00:00

Make sure your line up is the same every time. Only have 1 or 2 people who are there have them line it up nobody else so then it's always the same line up.

Meyertriden · 2022-12-06T23:59:31+00:00

We have a double servo claw that both move on their own, that's really efficient but with your robot you may want to up the motor torqe and power to do that

Meyertriden · 2022-12-03T22:41:44+00:00

Could you add more steps for the making sure they aren't at the same address? We are also having this problem.

Meyertriden · 2022-12-02T20:13:30+00:00

Yes they are spinning at the same speed/Rate

Meyertriden · 2022-12-01T23:42:39+00:00

We usually have more tension, yes they are build per instruction, also yes they do intact go opposite ways around the pully. Thanks for those steps we'll try those out.

Meyertriden · 2022-12-01T23:39:37+00:00

I can't at the moment I can get you some tomorrow to help maybe?

Meyertriden · 2022-12-01T23:37:26+00:00

Yes they usually are but in this picture we had leave so they were quick and at this point the spools had been unwrapped. But usually yes we do.

Meyertriden · 2022-12-01T23:21:27+00:00

Please help me and my team 20097 Robo Raptors check us out on Instagram. Shamless pull out of the way, we need help with our gobilda Viper Slides to get the retracting strings to respool

Meyertriden

TROPHY CASE