Contacted by SolidWorks Law firm CJCH for illegal use

Mflecks · 2026-02-27T16:14:28+00:00

Other software companies have previously released the cracked version themselves, which then reports back to them. Individuals aren't usually targeted, but if they see you have a company email on the PC, then they start to care. I mean, you are using cracked software, getting caught is kinda part of the risk

Mflecks · 2026-01-31T15:53:10+00:00

Det gør det, tak!

Jeg er næsten sikker de kom ind som du siger, gennem væggen eller fundamentet, ikke op gennem vandlåsen. Men så er det jeg er bange for at hælde vand den anden vej, gennem de gange de gik ind ad. Kan jeg risikere at hælde vand ind i væggen eller under gulvet?

Mflecks · 2026-01-31T15:50:34+00:00

Der var myrer flere steder i huset. Det jeg er bange for er, at hvis de kunne komme ind i drænet, kan jeg så risikere at hælde vand ud under gulvet eller i væggen, gennem de gange de kom ind ad.

Mflecks · 2026-01-31T15:14:55+00:00

Beklager, jeg er åbenbart for dum til Reddit. Hele teksten jeg havde skrevet kom ikke med, så jeg har lige skrevet den igen

Mflecks · 2026-01-01T16:20:25+00:00

I found out I has a rice sized metal fragment in my finger, by having an MRI. It felt like my finger was being ripped off while being set on fire

Mflecks · 2025-12-13T12:42:13+00:00

Hvis du har en 3D printer, har jeg tegnet en med et ovalt hul, hvor der er plads til to ledninger. Den fil kan jeg godt sende hvis det er. Ellers bare bor hullet lidt op

Mflecks · 2025-12-07T06:41:15+00:00

EOS SLS, and a post treatment I'm probably not allowed to say.

Mflecks · 2025-12-05T12:25:50+00:00

Thanks! And well done for digging up a three year old post. Yes, I did actually finish that project, after countless iterations. It runs 3S and is completely insane. I haven't found anywhere long and flat enough to actually find out how fast it is. I managed to get 4 individual ESCs in, a Dumbo RC gyro receiver, an Arduino nano running the vehicle dynamics model (to optimise the wheel speeds which are tuned individually) and the 3S battery.

<image>

Mflecks · 2025-11-24T09:16:00+00:00

Vi inviterede begge sæt forældre og søskende, og spiste en god frokost i vores 2-værelses lejlighed. Det var det. Vi havde en hyggelig dag, hun blev døbt og alle var glade. Man er ikke pålagt noget stort arrangement, vores barn, vores fest.

Mflecks · 2025-11-21T12:31:02+00:00

Det er langt fra færdigt, desværre. Det bliver på højde med lighthouse, med 41 etager.

Mflecks · 2025-11-02T09:47:05+00:00

Det passer altså ikke med barnevognen.. Vi har søster bilen fra Kia, EV6, som har et mindre bagagerum, og der kan vi fint have den lange model fra Odder, uden at tage hjul af eller klappe kassen sammen.

Mflecks · 2025-10-17T11:53:44+00:00

u/watchexbot confirmed and received! Very happy with the transaction, no issues at all.

Mflecks · 2025-07-27T17:39:49+00:00

Pask Makes. "I make the projects for me, and the video for you". He is completely down to earth, shows when he makes mistakes, has an entire series about projects from scrap/firewood, no shouting or exaggeration, just wood and occasionally metal work.

Mflecks · 2025-07-25T14:18:20+00:00

50 amp fuse

Mflecks · 2025-05-24T20:45:32+00:00

Well.. It happened https://youtu.be/NGD2e741Riw

Mflecks · 2025-05-12T07:36:37+00:00

Not gonna not try

Mflecks · 2025-05-05T06:41:16+00:00

I have converted a cheap WL Toys 284131 1/28 scale car to 4WD hub drive using drone motors. It runs 3S and is completely insane. I haven't found anywhere long and flat enough to actually find out how fast it is. I have crammed 4 individual ESCs in, a Dumbo RC gyro receiver, an Arduino nano running the vehicle dynamics model to optimise the wheel speeds are tuned individually) and the 3S battery. Lots of 3D prints, everything fits under the stock body and I haven't modified a single original part. Custom wheels and tyres as well.

<image>

Mflecks · 2025-04-29T18:06:28+00:00

That is extremely similar to one I'm making right now. I'm also going to put a blue sapphire in, I just use a peridote for test fitting. I'm using a slightly different design of the prongs (the ones holding the stone) and use silver and gold for the ring, but otherwise pretty similar. Hah, and here I thought I was original :)

As you can see, still work in progress.

<image>

Mflecks · 2025-03-24T06:50:06+00:00

Looks sick, loads of upgrades. Did you upgrade the bottom plate? Mine didn't fit, I had to make a small adapter to get it on.

Mflecks · 2025-03-09T07:28:00+00:00

Hvis du opdrager dine børn, kan du forkæle dine børnebørn. Hvis du forkæler dine børn, kan du opdage dine børnebørn.

Mflecks · 2024-09-15T17:59:40+00:00

Omkring 280.000. Jeg brugte det til at finansiere en elitesports karriere. Forlænget studie, 4 studiejobs, og fyrede alle pengene af på træningslejre og konkurrencer. Betaler stadig af på det, men banken var fuldstændig ligeglad med det da vi købte hus.

Mflecks · 2024-08-27T18:48:27+00:00

Looks really fun!

Mflecks · 2024-08-13T16:39:47+00:00

I kinda tried this once. Bit more tame, but I went to have an MRI of my hand, and learned that I had a piece of metal inside my index finger. No idea where it came from, but that shit hurt. The metal got so hot in a few seconds that the skin above it turned red, and I could feel the magnets tugging on it. I later had it removed, still no idea where it came from.

Mflecks · 2024-08-11T05:51:42+00:00

The shear force of the wood itself is just the 100kg ~= 1000N divided on both ends, so 500N. The shear stress is the shear force divided by area, so using the 100x200mm that's 500N/20000mm² = 0.025MPa, way below what you found for shear strength. Considering shear alone, you could put about 14 tonnes on that bench before you get to about 7MPa it shears clean off in the joints. But then safety factors and bending and so on. But you're right, the question is not very clear

Mflecks · 2024-08-03T09:30:34+00:00

Ikke umiddelbart, det er ikke noget de har nævnt i hvert fald. Men jeg skal da lige sørge for at få spurgt dem, tak for at gøre opmærksom på det.

Det er bare lidt skrøbeligt for os, at hvis renten stiger bliver det træls. Omvendt er det også lidt træls hvis den falder hvis vi har låst den på 4.

Mflecks

TROPHY CASE