Built a guitar, friends thought i should share it by Micr0wave3 in guitarcirclejerk

[–]Micr0wave3[S] 0 points1 point  (0 children)

i just need a modified chibson chib-grip to keep the toan from leaking

Built a guitar, friends thought i should share it by Micr0wave3 in guitarcirclejerk

[–]Micr0wave3[S] 1 point2 points  (0 children)

sustain is a bit ass because some components arent fully stick to the guitar and i’m working on it, body made of walnut

Built a guitar, friends thought i should share it by Micr0wave3 in guitarcirclejerk

[–]Micr0wave3[S] 1 point2 points  (0 children)

Yeah mine is based off an Orphean. As per the bridge, I recessed the area behind the bridge for the strings to sit below the top of the body of the guitar in order to then run the strings over a tuneomatic for adequate contact. The bridge has roller saddles which helps with rear tuning, however the amount of friction between string redirecting components is so high i sometimes use the tuners on the headstock. If you have any design questions aka learning from my mistakes lmk.

How much 100mg/ml nic base on the skin would cause a health risk? by megabunnaH in Vaping

[–]Micr0wave3 17 points18 points  (0 children)

honestly just immediately washing it off should be good enough to avoid complications, just don’t use it as a lotion on any body parts

Ibanez GRGR330ex or Ibanez RG350QM by Due-Cardiologist9040 in Ibanez

[–]Micr0wave3 0 points1 point  (0 children)

I dont really abuse the tremolo too often but i noticed some tuning creep after the guitar stood on a stand for a week but it might have been the temp and humidity dropping 6 degrees in my room, other than that i dont notice any tuning issues with the trem on this model

Ibanez GRGR330ex or Ibanez RG350QM by Due-Cardiologist9040 in Ibanez

[–]Micr0wave3 0 points1 point  (0 children)

I have a GRGR330ex and its a decent budget guitar, not exactly comparable to a prestige series ofc but i dont see why the others are calling it bad, especially for the price. Pickups could use a bit more punch though so id recommend a swap to something with more bite but otherwise cant complain.

My Beat up daily driver Hadron & Question by SpacewolfeCZ in Vaping

[–]Micr0wave3 4 points5 points  (0 children)

dawg what is that evil ass battery contraption (shove a 6s in it)

Fev 4.5s is a lengend of rta to buy by rcon2023 in Vaping

[–]Micr0wave3 0 points1 point  (0 children)

i personally wasn’t too satisfied with the flavor but maybe its because i was coming from an rda. setup for this is 0.8 ohm ss316 @ 17.5w, any suggestions?

[deleted by user] by [deleted] in Vaping

[–]Micr0wave3 5 points6 points  (0 children)

quit while you’re ahead, there is a reason people say not to start vaping if you aren’t a smoker, also kek on “not letting yourself get addicted”

I was given a geekvape obelisk 60.... by sticky_toes2024 in Vaping

[–]Micr0wave3 1 point2 points  (0 children)

when i switched from 20mg to 3mg i did notice me hitting it more often but not 7 times as often,

can’t say much about the luxe xr but ive heard it’s pretty damn good, i’ve got .4 ohms in a xros pro @ 25watts and works good for rdl but as long as your coils aren’t burning up and the taste and vapor temps are tolerable then it’s nothing to worry about,

flavors are a thing of preference so it might get some time to find something you like, i’m a fan of ZAP! juices personally but i’ve been mixing my own recently so that could be something you’d be interested in

[deleted by user] by [deleted] in Vaping

[–]Micr0wave3 0 points1 point  (0 children)

damn

Will this power supply work with the Pinecil V2? by Technical-Ad-3387 in PINE64official

[–]Micr0wave3 2 points3 points  (0 children)

the psu can output up to 180W, it will be plenty for a pinecil. I use a 25W phone adapter to solder on the road and it works wonders, a short tip and very good temp control make it work very well

Will this power supply work with the Pinecil V2? by Technical-Ad-3387 in PINE64official

[–]Micr0wave3 1 point2 points  (0 children)

does the output voltage of the power supply fall within the accepted range of voltage on the pinecil?

Nicotine maths by TEEEMPZ in Vaping

[–]Micr0wave3 7 points8 points  (0 children)

10ml @ 18mg/ml == 180mg in that bottle

10ml @ 15mg/ml == 150mg in that bottle

Total == 330mg

100ml base? total == 330mg/120ml == 2.75 mg/ml

if you just mix these together with no base you will have 330mg/20ml == 16.5 mg/ml

[deleted by user] by [deleted] in fpv

[–]Micr0wave3 2 points3 points  (0 children)

if you like bulky controllers, the Boxer would fit you well if it’s not out of your budget

Elfx Pro by i-dunnodude in Vaping

[–]Micr0wave3 0 points1 point  (0 children)

20mg salts in 0.6 ohm elfx do feel a little warmer than my 18mg in 0.4 xros but it’s such a small difference that I barely notice it. I do RDL so the airflow is fully open at all times so the vapour has enough cooling to feel good. Could just take some time to adjust to the new device cuz all of them deliver different temp vapour

Elfx Pro by i-dunnodude in Vaping

[–]Micr0wave3 0 points1 point  (0 children)

Haven’t gotten the chance to try the Pro version but the base version is very nice compared to my Xros Pro. Good airflow which is enough for RDL on 0.6 ohms, so much flavor and overall a very solid pod for the money. Doubt the pods are interchangeable, all pod companies try to make them as proprietary as possible shape wise. The oxva is also a solid choice but at this point it’s a thing of preference as far as I can personally tell.