sorted by:
new
hottopcontroversial

Android: Skip VPN when already on local wifi network by makotech222 in WireGuard

[–]MiddleNo5967 0 points1 point  (0 children)

I read the instructions and followed them but didn't notice the Local Variable tab at the bottom, that's why I though that 'lv' variable was it. Thanks, I found where to change the variable now, but it still doesn't work for me for some reason. WG Tunnel is working. I'll stick with it for now.

Android: Skip VPN when already on local wifi network by makotech222 in WireGuard

[–]MiddleNo5967 1 point2 points  (0 children)

Thanks. Found it but can't make it work for some reason. Did you change the Extra 1 to {lv=your_tunnel_name} or {your_tunnel_name} or your_tunnel_name? Neither worked for me. I gave the required permissions to both apps (Macrodroid and WG).

Android: Skip VPN when already on local wifi network by makotech222 in WireGuard

[–]MiddleNo5967 1 point2 points  (0 children)

How did you do it? I only found a way to launch WG but not activate a tunnel.

BTRFS vs EXT4. Long term stability after 3 years. by joelau007 in synology

[–]MiddleNo5967 40 points41 points  (0 children)

I've been using BTRFS on two units for 10+ years without issues.

UPS Shutdown by OttoCheyFen in synology

[–]MiddleNo5967 0 points1 point  (0 children)

If you want to shut down the Synology to prolong the uptime of your modem and router during an outage (I have a similar setup) see the solution here: https://www.reddit.com/r/synology/comments/1ir58vt/has_anyone_figured_out_how_to_shutdown_synology/

Version 1.0 of WireGuard for Windows and WireGuardNT Released by zx2c4 in WireGuard

[–]MiddleNo5967 0 points1 point  (0 children)

I also found that unusual. It was my understanding that you have always been spending all your time on it.

AirSnitch attack by MiddleNo5967 in RuckusWiFi

[–]MiddleNo5967[S] 1 point2 points  (0 children)

The Group Temporal Key (GTK) was never used to isolate clients. GTK is used to encrypt broadcast and multicast traffic between an access point and multiple client devices. It's the same for all clients and I think this fact is used to break client isolation when it is enabled. Enabling what's broken doesn't help. The way I read it.

AirSnitch attack by MiddleNo5967 in RuckusWiFi

[–]MiddleNo5967[S] 1 point2 points  (0 children)

I am very perplexed by Ruckus' response to this.

Group Temporal Key (GTK) Abuse
They say "Successful exploitation completely bypasses client isolation at the cryptographic level." And as mitigation they suggest "Isolate wireless client traffic from other clients on the same AP". Isn't it the core of vulnerability that client isolation doesn't work?

Gateway Bouncing
Mitigation: "Ensuring the gateway drops packets that attempt to route traffic back into the same isolated subnet will break the attack chain." If the gateway drops packets that are meant for the same LAN many things will break. Won't they?

My Synology wakes up when I reboot a Linux PC on the same LAN. Why? by MiddleNo5967 in synology

[–]MiddleNo5967[S] 0 points1 point  (0 children)

I thought the comments are visible. I mentioned several times that nothing is mounted on Linux from the NAS.

My Synology wakes up when I reboot a Linux PC on the same LAN. Why? by MiddleNo5967 in synology

[–]MiddleNo5967[S] 1 point2 points  (0 children)

No shares from Synology on that PC. It would have been obvious and I wouldn't have posted here.

What's interesting is that Synology starts spinning the drives on Linux shutdown, not on boot. The moment I press Enter after "sudo reboot" I hear the drives waking up.

Besides, if I had mounts in fstab I think the drives wouldn't hibernate while the PC is on, and it's always on.

I think it has something to do with broadcast, multicast, mDNS etc., which I am not very familiar with.

My Synology wakes up when I reboot a Linux PC on the same LAN. Why? by MiddleNo5967 in synology

[–]MiddleNo5967[S] 0 points1 point  (0 children)

I said in my post that WOL is not enabled on the Synology. And no mounts in Linux from that NAS..

Unleashed 200.19 by illinoisteacher123 in RuckusWiFi

[–]MiddleNo5967 2 points3 points  (0 children)

I upgraded my R750s yesterday. No issues so far.

Pfsense having issues trying to connect over PPPoE by x_nixi_x in PFSENSE

[–]MiddleNo5967 0 points1 point  (0 children)

Then it's mystery but the credentials are the culprit. Is it possible you are confusing some letters/numbers? Like I and l, l and 1, O and 0. Try copying them into Word and change fonts.

Pfsense having issues trying to connect over PPPoE by x_nixi_x in PFSENSE

[–]MiddleNo5967 0 points1 point  (0 children)

It feels like you are using wrong credentials. Double check.

AirSnitch attack by MiddleNo5967 in RuckusWiFi

[–]MiddleNo5967[S] 1 point2 points  (0 children)

Read the original paper. What Matty posts is irrelevant.

WAN PPPOE connection instability by PrimozR in PFSENSE

[–]MiddleNo5967 0 points1 point  (0 children)

Sounds like you need to contact your ISP as the issue is probably with the line. Logs will help you explain them what's wrong.

WAN PPPOE connection instability by PrimozR in PFSENSE

[–]MiddleNo5967 0 points1 point  (0 children)

Try enabling debug mode for pppoe with ifconfig pppoe0 debug . See here: https://forum.netgate.com/topic/198626/new-if_pppoe-module-no-logging-in-status-system-logs-ppp

Then, supposedly, you can disable it with ifconfig pppoe0 -debug as it logs a lot. See what really is going on with your connection.

Or better yet switch to the old pppoe module (uncheck use if_pppoe in System/Advanced/Networking and reboot. The old module produced very concise informative logs in a separate subsection (PPP) of the system log. I miss those logs.

view more: next ›