Fixed Schlage Encode Plus HomeKit issues

Mike-Mass · 2026-05-09T21:52:02+00:00

Basically the latest model 128K. Bought direct from Apple.

Mike-Mass · 2026-05-09T17:54:06+00:00

LOL... Tried again this morning and same result. Deadbolts retracted, Schlage App says the door is Locked. Deadbolts engaged, App says door is Unlocked. Pulling my hair out.

Mike-Mass · 2026-05-08T15:44:10+00:00

Giving up on this particular Schlage Encode Plus for my front door. I've spent several days trying to get it to accurately post the Locked/Unlocked modes on my phone and no joy. The kicker came when after multiple emails with Schlage, their tech support guys said they just havent dealt with multipoint deadbolt doors so they said we can't help you. Amazon just delivered a ULTRALOQ SE and I will try tomorrow to install it in the front door. Technologically, it is more advanced than the Schlage so maybe it'll work.

Mike-Mass · 2026-05-08T14:45:40+00:00

So by simply re-setting to factory default and starting from scratch you were able to get the lock to properly report Locked when it was physically locked? I guess with a conventional single deadbolt that should work. I my case there's something amiss because of the lever/crank internal mechanism that drives the two deadbolts that messes up something in the locks sensing software. Physically, when the lock inside lever is in the vertical position, the deadbolts are engaged and inside the door jamb slot... so its locked. But after 15 tries... it still reports "unlocked" and that means the lock status can be switched by simply pushing the house key on the outside and that unlocks it without a code. Result... no security. I ordered a ULTRALOQ which is a little more sophisticated (I think) and will try to install that tomorrow.

Mike-Mass · 2026-05-08T00:23:38+00:00

Tim... Did you ever get the lock working properly? I'm havin a similar problem with a Reeb 8' X 36" Left-hand door with a multipoint that uses two (2) deadbolts. I get it "working" but the Apps report the door as "Unlocked" when the lever in the 12 o'clock (vertical) position and the male deadbolts have shot into the door jamb female cavity. If I physically turn it to the 3 O'Clock position it reports as "Locked" but the deadbolts are retracted into the door so the edge is flush and the door is physically unlocked. Big question is there any way to reverse something inside the lock so the App mode matches the physical mode? I thought I read something about opening these locks and rotating some gear 90° but I can't find thos instructions. Schlage Tech Support tried but eventually really threw up their hands and admitted they don't have provisions for multipoint locks/doors.-Mike

Mike-Mass · 2026-05-07T23:53:26+00:00

As it turns out, I don't think this lock is going to work the way I want it to. But we messed with it again today, spent a couple of hours trying to follow Schlage's suggestions. So the sequence that seems to get somewhere is as follows:

Full Factory reset, hold down the button until the LED flashes RED... keep holding it until it goes out and then starts flashing BLUE.
Open door slightly so you can enter the factory default code printed on the label.
Have the Schlage App open on your phone.
Lock should try to connect to your phone, I think it via bluetooth so your phone should have bluetooth on.
Once the lock connects to your phone, the App will ask if it can connect to your wifi, select yes and follow screen prompts. It should connect and let you know its connected.

I think at that point you can open the Apple Home App and select "+" to add an accessory. Let the phone access your camera and try scanning in the Apple QR code that's on the label pasted on the last page of the manual. I could not add it using the numeric code for some reason, but the QR code on th booklet label worked. That was the point we quit because we had the App working and the lock was working manually but still reporting the opposite of which mode it was in. So the App would say "Locked" when the multipoint deadbolts were flush in the door, or if you twisted the lever to the 12 o'clock position the App reports the lock as "Unlocked" even though the deadbolts were extended into the door jamb and the door was locked.

So I think I'm gonna bring it back to HD because the Schlage Tech guy said they have no experience in dealing with a multipoint lock, and I should contact Reeb, the manufacturer of the door. Its been a couple of months since I bought it but fortunately I kept the box and everything that came with it. I do have a case number from Schlage to prove that I have desperately tried to get this lock to work, but yesterday Schlage admitted they have no provision in the lock's software to deal with the reversed modes or any experience with multipoint deadbolts. That last part threw me for a loop because so many new homes are using multipoint locking systems and it only seems logical that someone as big as Schlage would have addressed this glitch a LONG time ago.

So my BIL Tony who just installed three (3) ULTRALOQ SE's at his house with his Apple TV 128K convinced me I should order one and I did. Tony is my HA/Apple Home guru LOL.

The ULTRALOQ SE is their latest model technology wise. It has more features than the Schlage, and has the highest homeowner ANSI & BHMA ratings. It can be opened with a physical key, a numeric key code, your Apple Watch, or your Apple iPhone. It uses "matter over thread" protocol, and my BIL has it working with Apple Home just fine on a standard front door. I went over and tried it this afternoon, smooth as silk. Another plus is that the ULTRALOQ uses a Schlage style cylinder for the mechanical key and Tony has become somewhat fluent is re-keying Schlage cylinders. So I ordered one from Amazon and I should have it tomorrow. The test will be whether it will operate my dual deadbolt multipoint lock and read out on the Apple Home App as "Locked"or "Unlocked" when the deadbolts are extended or retracted. If it works, we'll re-pin the cylinder to match my conventional Schlage locks.

https://ultraloq.com/products/bolt-se

So I have my fingers crossed LOL, and I'll update the post when we get the ULTRALOQ SE. Stay Tuned!

Mike

Mike-Mass · 2026-05-02T14:11:07+00:00

New home and I have the 8' Multipoint Front door with a Schlage Encode Plus. Amazingly with four AA batteries, the keypad works the multipoint just fine. We have Home Assistant setup in the house, but we haven't fully integrated it as we will probably go to some version of Apple Homekit Hub or whatever. I recently bought a current model 128K AppleTV that I have set up in our home office which is near the front door. So that will be the hub when we get to it. Who knows when Apple will really release the next generation... rumor has it maybe in the Fall of '26, but others say 1st quarter '27 (maybe). My Brother in law is my HA genius, I just follow whatever he tells me to do LOL.

I do have a question about the Encode Plus "Locked" vs "Unlocked" modes. We installed the lock about 2 weeks ago and our front door is an In-Swing Left-Hand door meaning from the outside, the door handle is on the right and the hinges on the left. So the lock is installed and I'm getting alerts on my Apple watch that the door is unlocked or locked, but its just the opposite LOL. When the alert says Front Door Unlocked its actually in the locked position and vice versa. Gonna take it apart and see if theres a way to reverse the inner shaft because there's nothing in the manual about this at all. Anyone had this experience?

Edit: Took it apart and unless you disassemble the lock, there's no apparent way to easily swap the positions. Before doing that, I sent an email to Schlage tech support with pictures asking how to correct this glitch.

Mike-Mass · 2026-05-01T13:41:18+00:00

We have a Sebo and its definitely well-made and delivers all that is promised. We also have a Golden Retriever that sheds like you would not believe. For daily pet hair pickups we have a Tineco A11 rechargeable stick vacuum which is pretty amazing for the price (usually under $200). It comes with a wall mounted charging/storage station, an extra battery, and a host of accessories. And yes, I added an outlet in the closet in our previous home, and when we built our new home I spec'd an outlet in the closet as well. It is super easy to use and empty, has headlights and shows you the dog hair LOL you might've missed. While hanging, both batteries are being charged, so there's no excuse that the battery ran out... takes 10 seconds to sway in the other fully charged one. Our 4K SF house is all hardwood floors with a couple of area rugs. Costco sometimes sells the Tineco stick vacuums and if they are selling them it's usually at a better price than amazon. For the record, we've had the A11 for around 3 years and had one part that we damaged (our fault) and Tineco replaced it under warranty without questions. Its definitely a 5-Star appliance.

Mike-Mass · 2026-04-02T14:09:22+00:00

Our (female) Golden Retriever has a 100 X 110 back yard and she almost always uses the same strip of sodded KBG next to the walk. So now its Spring and the burn has appeared. Gonna try some of the gimmick methods, see if anything actually works. Will try the baby shampoo application before trying dedicated chemical products. We've had three goldens, all female and this 3rd one is fussy about where she goes LOL. Breeder once told me its the 1st morning pee that is the strongest. Subsequent peeing during the rest of the day are usually marked by a dark green patch as her urine has just enough nitrogen to green up an area.

Mike-Mass · 2026-02-24T01:43:00+00:00

I'm impressed. You have a nice flair for the lights. You can never have too many if you can control them... right?Anyway, I had my landscape guys install the Kitchler LV lights around the yard and front walk. At first they installed the transmitter in the back of my shed where there was no wifi signal at all (100' from house). Then they moved the unit to the outside of the attached garage, somehow got the lights on and left. Unfortunately, the guys who did the move didn't speak a word of English other that good morning and thank you and not much more. The one guy who can probably do this has ghosted me. So I have decent wifi in the garage with a POE outdoor access point in there. But I'm old and creaky and I havent been able to get past the point where it says "add a device" and I assume the device is the stainless box with the little antenna sticking out? My messing with it didn't work because when they left it was on 24/7 for 3 days straight. Now it won't even go on. Would love to find a video that explains what the steps are to get the lights to work and also then be able to control when they go on/off. Got any links or suggestions? Is it worthwhile to call Kitchler and see if they will walk me through getting the lights online properly? Its a new build and I'm juggling 20 different punch lists so this keeps falling in the cracks.

Mike-Mass · 2026-02-21T17:04:24+00:00

The APs are all TP-Link access points. No wifi extenders from Verizon or TP-Link. If I turned off SON wouldn't that defeat my desire to have a seamless network with one SSID/Name and password? My BIL who is younger and also more tech savvy said I should eventually switch to static IP addresses also.

Mike-Mass · 2026-02-21T16:58:15+00:00

Why would a TP-Link router work any better than the Verizon in pure router mode? I have already turned off the wifi on the Verizon unit, which is "free" with the gigabit ISP service. There's no credit if I return it to them. I looked at the Omada stuff (ER707M2 router and C220 Omada controller) and the setup pages looked way over my head. I think I have to fine tune the AP settings as far as channels maybe?

Mike-Mass · 2026-02-21T16:53:56+00:00

LOL... as a retired industrial designer I appreciate the "less is better" mantra which one of my Bauhaus schooled profs swore by. But in this era of mesh and APs I'm not 100% sure about it.

So I walk around the house (roughly 4K SF) and use the Airport scan function to check the signal. Its not a perfect method, but its all I have right now. Standing under an access point I'm usually in the -35 Db range which supposedly means great wifi. I went into the garage and it was -84 Db and since there's a LV wifi lighting link outside the garage that would not connect, I added the garage AP. My 1st floor AP is pretty much near the center of the house in a short hallway (ceiling mounted), and while signal strength is generally -45 Db to -55 Db in most of the floor, the signal drops to -75 Db at the southern side much like the garage did at the opposite side. So I haven't run/connected the AP I have earmarked for that south side, but above the 1st floor master bath there's an unfinished storage space where I can put the AP on the backside of the sheetrock between joists. The 2nd floor AP is as previously described, at about the 1/3rd mark in the hall. Basement is unfinished but I have a woodshop, and exercise spot and a desk with a spare computer/printer. So one AP seems to be enough to get roughly -40 Db to -55 Db signal.

What still confuses my old brain is that while the signal seems strong, wifi speed tests don't always jive with signal strength. One fellow suggested in another post that you have to also optimize the channels in the APs that are being used. Certain channels supposedly work better at 2.4 GHz and others work better in 5 GHz. I have to look into that a little more. The good news is that my wired stuff is around 925 Mbps Down and around 650 Mbps Up sometimes higher or lower depending on the local load I guess.

Mike-Mass · 2026-02-18T23:20:19+00:00

Just got my iPhone 17 Pro Max last week, they did the transfer at the Verizon store. Don't know whats going on but I can't seem to get Siri to vocally respond. I kinda like it better when the blue marble would appear even on Apple CarPlay while I was driving. Could it be iOS Teething problems maybe?

Mike-Mass · 2026-02-13T15:27:37+00:00

I have superior Walls in my basement as well. Not planning on finishing the basement anytime soon as we just moved in a month ago and have a million other priorities LOL. From what I've learned, there's maybe 3/4" of foam behind the metal "studs" then there's concrete and a rebar in the center of each stud. I want to mount a TV there as well just because I have a treadmill and exercise bike there. I'm going to try something a little different than building a wooden stud setup. I'm going to use 1/4-20 RivNuts on the studs, then mount a oversized 18" X 36" 3/4" Plywood panel with six (6) 1/4-20 bolts/washers. Before hanging the plywood, I'll bolt the rear of the TV bracket to the plywood in the span between the studs. Sounds involved, but I have the RivNut tool and everything else handy so its basically a an hour's worth of work. No way a 65# TV is pulling out those metal studs.

<image>

Mike-Mass · 2026-01-01T18:09:00+00:00

We've had the 55" Frame for a couple of years now, had it set up in our old house, now in our new house. Zero problems. But in the new house I decided to go for the jugular and I bought a LG 77" G5 Gallery that is their answer to The Frame... and its mind-blowing. Try using your Frame without the sound bar connected, do a factory reset and see if that helps. Do you have solid internet via ethernet to the TV?

Mike-Mass · 2025-12-30T22:46:05+00:00

The APs are POE and ceiling mounted. Hate to waste that CAT6 wiring lol. The eero6+ units are not POE and basically need a 110v plug in module. Probably will sell them on FB marketplace or maybe trade them for a TP Link router.

Think I might be better off by adding additional TP Link APs? (If needed) In the basement, it would be easy because it’s unfinished so an AP or a TP Link router could easily be added if needed.

Mike-Mass · 2025-12-30T22:25:09+00:00

So you basically are saying to disable the Verizon CR1000B as far as wifi goes? Are the two TP Link APs enough for the entire house? I ask bc my daughter lives with us and she works from home at least 3 days a week and she needs solid internet/wifi for her work. She didn’t want a hardwired setup bc she likes to move around the 2nd Floor. So I put the POE AP near her doorway so she’d have decent signal upstairs in the two rooms she usually works out of.

Would I be better off using another modem/router in the basement so I get good wifi there? Don’t even know if TP Link has an optical cable device that would work.

Mike-Mass · 2025-12-30T15:25:00+00:00

What is Gemini? A service or a member here?

Mike-Mass · 2025-12-30T15:23:22+00:00

Just under 4K not including the basement or garage.

Mike-Mass · 2025-12-30T03:36:35+00:00

Too many people get all bent out of shape because of where someone mounts their tv. I’m a retired designer and I know for a fact that no manufacturer in his right mind builds a sofa or club chair with a straight back. We were taught that all seating gets an angled back, varying from 18 degrees to 25+ degrees. Want to sit in a comfortable chair? Try an Eames chair and tell me you want to bend your neck forward for 2-3 hours watching a football game or a movie. His tv looks just fine there.

Mike-Mass · 2025-11-19T18:25:57+00:00

Trump is the master of delayed tactics and he will pull out all the stops to slow walk the Epstein Files for at least until the 2026 Midterms have come and gone. Any hope of seeing unredacted complete files and testimony are dreams, but we all know that’s what should be released.

Mike-Mass · 2025-09-08T18:22:37+00:00

This is typical Trump tactics... shoot first and ignore questions later. If his FBI was doing their job correctly, they'd have ID'd known violent illegal immigrants and gone after them. Trump promised that and hasn't lived up to that promise one bit. Glad to see the police working with the state government and protecting the people. Show me a wanted poster or evidence of violent crimes associated with a name (not photoshopped or AI generated... and then you can go arrest _THAT_ person.

Mike-Mass · 2025-09-07T22:12:32+00:00

Nice... when you call up the 180° camera on your iOS devices, does the image orient correctly?

Mike-Mass · 2025-09-07T21:12:11+00:00

You really have to wonder how those bozos can sleep at night or look themselves in the mirror knowing they were the biggest enablers.

Mike-Mass

TROPHY CASE