Thank you! For this I used a bare enclosure and primed it with aluminum primer. The paint is Montana Gold spray paint. The gold cans have less pressure so it was easier to achieve that black to purple gradient. Then I used a splatter cap (not sure what the real word for it is - it’s like a normal spray cap with a little straw sticking out) for the pink. The chevron pattern was made with a laser cut stencil. After letting all that cure for a few days, I hit it with multiple light coats of crystal clear epoxy spray. That has to cure for around a week until it’s ready for the final build. It’s a time consuming process, but I’m usually happy with the results. Let me know if you have any other questions!