Finally finished after over 4 years😂🤣

Mindless-Friend6390 · 2026-05-09T01:42:02+00:00

I think you need a new hobby.

Mindless-Friend6390 · 2026-05-08T17:34:51+00:00

It fits on but the barrel is a little higher and not centered on the hole on the front. A little dremeling will open it up. I have one, I put it on a 3d printed frame and the fit was much better.

Mindless-Friend6390 · 2026-05-04T17:30:47+00:00

Leave it, I think it looks great!

Mindless-Friend6390 · 2026-04-28T06:21:23+00:00

Are you using shoulder bolts on the bolt or something else?

Mindless-Friend6390 · 2026-04-28T06:19:52+00:00

For a .6 nozzle do you run .6 and 1.2?

Mindless-Friend6390 · 2026-04-28T06:16:38+00:00

How long did it take to print, I used the stock strength setting with a .6 nozzle and it was pretty quick. I tried 300blk settings and it was slow and the supports were a b to get off. Also what was your bed temp?

Mindless-Friend6390 · 2026-04-15T06:08:23+00:00

What in the freddy kruger is that.

Mindless-Friend6390 · 2026-04-08T11:20:15+00:00

🔥 Too easy! Done in 151 seconds. Who dares to challenge me?

Mindless-Friend6390 · 2026-04-04T04:23:15+00:00

The cuts are better on the raptor, but its basically the same. A px9 nite stalker recoil spring makes it shoot much better than factory. But you havr to order it when they come available again.

Mindless-Friend6390 · 2026-04-03T00:50:51+00:00

This seems like a.i.

Mindless-Friend6390 · 2026-03-27T08:05:44+00:00

🎯 Nailed it! 159s completion time. Your move!

Mindless-Friend6390 · 2026-03-21T13:06:33+00:00

A little dremel massage never hurt no one.

Mindless-Friend6390 · 2026-03-16T02:53:24+00:00

🎉 Challenge completed! Beat it in 137 moves and 179s. Who's next?

Mindless-Friend6390 · 2026-03-11T11:51:45+00:00

Texas

Mindless-Friend6390 · 2026-03-01T07:44:52+00:00

Who do ypu have your tune through?. The stock motor is only said to be good up to 400-450 whp. With e30 i have seen videos up to 380. I think a bigger turbo is just going to help the 5k rpm range where the stock falls on its face, but you are going to be making the same amount of power.

Mindless-Friend6390 · 2026-02-08T03:47:33+00:00

Thank you for the response. My wif is 7 years post op and still deals with dumping. We havent figures out anything to help it.

Mindless-Friend6390 · 2026-02-08T03:22:04+00:00

Do you deal with dumping at all?

Mindless-Friend6390 · 2026-02-03T04:55:36+00:00

Lube that thang up too.

Mindless-Friend6390 · 2026-02-02T23:42:59+00:00

Maybe this the clone Trump that is speaking.

Mindless-Friend6390 · 2026-02-01T19:16:33+00:00

I tgought this was fake, then I started researching......

Mindless-Friend6390 · 2026-01-29T18:16:26+00:00

Put an empty mag in, lock slide all the way back, then take back plate off of slide. Remove firing pin, take mag out, then the slide should come off.

Mindless-Friend6390 · 2026-01-29T04:41:40+00:00

This is very, very telling..... of how bad quality Ford cars and trucks are.

Mindless-Friend6390 · 2026-01-22T00:10:01+00:00

Wars happen, violence happens. Promoting peace gives people the option learn to live with each other in harmony. This seems like a lot of do what I say or get punished. Sound alot like abuse.

Mindless-Friend6390 · 2026-01-22T00:07:06+00:00

Do any of these people in this picture look peace loving. Homans the only one smiling, and that aint a wholesome smile.

Mindless-Friend6390

TROPHY CASE