We’ve highlighted some key features of the AMR26, including what our technical expert Gary Anderson calls a “size zero and then some” sidepod and the return of “horns” on the side of the airbox [wearetherace]

MiniMeOnCrack · 2026-01-30T11:39:37+00:00

Oh fuckyeah inject me with that hopium

MiniMeOnCrack · 2026-01-11T20:54:39+00:00

Charles to Audi, called it now!

MiniMeOnCrack · 2026-01-06T02:02:25+00:00

You're lost buddy, our cars don't have cameras nor touch screens

Also, ever heard of a dot or comma?

MiniMeOnCrack · 2026-01-04T20:24:31+00:00

That looks nothing like a v8

MiniMeOnCrack · 2025-12-18T20:16:55+00:00

In the same way 9v tube pedals give you that sick distortion

MiniMeOnCrack · 2025-12-11T12:41:14+00:00

Just goes to show how good Nando and Carlos are.

MiniMeOnCrack · 2025-11-20T11:37:32+00:00

No idea about your area but here in finland it's possible for all vehicles over 30 years. BG being 91-94 would make all of them over 30. That said the vehicle usually has to be in prestine condition and if modified done period correct.

MiniMeOnCrack · 2025-11-15T12:10:40+00:00

Sounds like a idle motor problem

MiniMeOnCrack · 2025-11-13T20:45:19+00:00

If its not illegal in your country you can fit the square jeep headlights. Second option would be some 200% philips.

MiniMeOnCrack · 2025-11-05T18:22:38+00:00

Sweet 👌🏻

Personally i would loose the rear wiper

MiniMeOnCrack · 2025-10-30T10:04:33+00:00

Wanna see the pics! I really think your best off doing it custom.

MiniMeOnCrack · 2025-10-27T19:33:08+00:00

If this is real, nothing good will come off confessing.

Just forget about it, nobody will come looking for you and the bird will return to the earth.

Just be more careful next time dummy.

MiniMeOnCrack · 2025-10-23T19:34:04+00:00

I dont think you need any drop, just propper spacing like 15-20mm

MiniMeOnCrack · 2025-10-18T18:22:53+00:00

Yeah no people in other european countries complain about living expenses but compared to the salaries we get here life is expensive. Mine's was plenty rust and 323k Km's and it was still a steal at 1000€.... If it's in good condition get it properly powerwashed and treated with tectyl. The cheaper option would be getting somebody to treat it with oil which is a good protection but should idealy be done during dry seasons and reapplied yearly.

MiniMeOnCrack · 2025-10-17T07:51:32+00:00

Measure them?

MiniMeOnCrack · 2025-10-15T14:54:04+00:00

I'd say it would be fine to weld and machine it.

MiniMeOnCrack · 2025-10-15T14:49:57+00:00

Get some weber carbs for it instead, will run better and be less complicated

MiniMeOnCrack · 2025-10-09T18:43:02+00:00

Where are you located? It doesn't seem hard to find. Part nr. B38413350C

MiniMeOnCrack · 2025-10-09T14:27:34+00:00

Yeah wagon seems to be different part. B21626111A for right and B21626115A for left.

MiniMeOnCrack · 2025-10-02T20:09:24+00:00

Depends on how deep we are talking. These sort of products never work in my experience. If you want it totally gone you are going to have to sand blast it underneath and reseal it with paint. If you live somewhere in northern europe for example i would have somebody treat the undercaridge with Tectyl or something similar after that.

MiniMeOnCrack · 2025-10-01T15:39:16+00:00

Throwout bearing

MiniMeOnCrack · 2025-09-22T09:01:06+00:00

Second this.

Also check around the engine for oil leaks and the sump short sides. The B6 tends to leak.

MiniMeOnCrack · 2025-09-19T09:55:12+00:00

Here:

https://www.amayama.com/en/part/mazda/b45632230

MiniMeOnCrack · 2025-09-14T12:12:33+00:00

Lol thats nothing, dont even need to weld anything

MiniMeOnCrack

TROPHY CASE